Only used by decoders (encoders have ff_encode_alloc_frame()).
Also clean up the other headers a bit while removing now redundant
internal.h inclusions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Only used by decoders.
Also clean up the headers a bit while removing now unnecessary
internal.h inclusions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, these encoders received non-refcounted packets
(whose data was owned by the corresponding AVCodecContext)
from ff_alloc_packet(); these packets were made refcounted lateron
by av_packet_make_refcounted() generically.
This commit makes these encoders accept user-supplied buffers by
replacing av_packet_make_refcounted() with an equivalent function
that is based upon get_encode_buffer().
(I am pretty certain that one can also set the flag for mpegvideo-
based encoders, but I want to double-check this later. What is certain
is that it reallocates the buffer owned by the AVCodecContext
which should maybe be moved to encode.c, so that proresenc_kostya.c
and ttaenc.c can make use of it, too.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The encode-callback (the callback used by the FF_CODEC_CB_TYPE_ENCODE
encoders) is currently called in two places: encode_simple_internal()
and by the worker threads of frame-threaded encoders.
After the call, some packet properties are set based upon
the corresponding AVFrame properties and the packet is made
refcounted if it isn't already. So there is some code duplication.
There was also non-duplicated code in encode_simple_internal()
which is executed even when using frame-threading. This included
an emms_c() (which is needed for frame-threading, too, if it is
needed for the single-threaded case, because there are allocations
(via av_packet_make_refcounted()) immediately after returning
from the encode-callback).
Furthermore, some further properties are only set in
encode_simple_internal(): For audio, pts and duration are derived
from the corresponding fields of the frame if the encoder does not
have the AV_CODEC_CAP_DELAY set. Yet this is wrong for frame-threaded
encoders, because frame-threading always introduces delay regardless
of whether the underlying codec has said cap. This only worked because
there are no frame-threaded audio encoders.
This commit fixes the code duplication and the above issue by factoring
this code out and reusing it in both places. It would work in case
of audio codecs with frame-threading, because now the values are
derived from the correct AVFrame.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Instead of indicating whether we got a packet by setting
pkt->data and pkt->size to zero.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
AVCodecInternal.frame_thread_encoder is only set iff
active_thread_type is FF_THREAD_FRAME.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Improves the test; also should fix Coverity issue #1512408.
Reviewed-by: Pierre-Anthony Lemieux <pal@sandflow.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
As vaapi doesn't actually do anything useful with the alpha channel,
and we have an alphaless format available, let's use that instead.
The changes here are mostly 1:1 switching, but do note the explicit
change in the number of declared channels from 4 to 3 to reflect that
the alpha is being ignored.
As we already have support for VUYA, I figured I should do the small
amount of work to support VUYX as well. That means a little refactoring
to share code.
This is the alphaless version of VUYA that I introduced recently. After
further discussion and noting that the Intel vaapi driver explicitly
lists XYUV as a support format for encoding and decoding 8bit 444
content, we decided to switch our usage and avoid the overhead of
having a declared alpha channel around.
Note that I am not removing VUYA, as this turned out to have another
use, which was to replace the need for v408enc/dec when dealing with
the format.
The vaapi switching will happen in the next change
The fastest fast Fourier transform in not just the west, but the world,
now for the most popular toy ISA.
On a high level, it follows the design of the AVX2 version closely,
with the exception that the input is slightly less permuted as we don't have
to do lane switching with the input on double 4pt and 8pt.
On a low level, the lack of subadd/addsub instructions REALLY penalizes
any attempt at writing an FFT. That single register matters a lot,
and reloading it simply takes unacceptably long.
In x86 land, vendors would've noticed developers need this.
In ARM land, you get a badly designed complex multiplication instruction
we cannot use, that's not present on 95% of devices. Because only
compilers matter, right?
Future optimization options are very few, perhaps better register
management to use more ld1/st1s.
All timings below are in cycles:
A53:
Length | C | New (lavu) | Old (lavc) | FFTW
------ |-------------|-------------|-------------|-----
4 | 842 | 420 | 1210 | 1460
8 | 1538 | 1020 | 1850 | 2520
16 | 3717 | 1900 | 3700 | 3990
32 | 9156 | 4070 | 8289 | 8860
64 | 21160 | 9931 | 18600 | 19625
128 | 49180 | 23278 | 41922 | 41922
256 | 112073 | 53876 | 93202 | 101092
512 | 252864 | 122884 | 205897 | 207868
1024 | 560512 | 278322 | 458071 | 453053
2048 | 1295402 | 775835 | 1038205 | 1020265
4096 | 3281263 | 2021221 | 2409718 | 2577554
8192 | 8577845 | 4780526 | 5673041 | 6802722
Apple M1
New - Total for len 512 reps 2097152 = 1.459141 s
Old - Total for len 512 reps 2097152 = 2.251344 s
FFTW - Total for len 512 reps 2097152 = 1.868429 s
New - Total for len 1024 reps 4194304 = 6.490080 s
Old - Total for len 1024 reps 4194304 = 9.604949 s
FFTW - Total for len 1024 reps 4194304 = 7.889281 s
New - Total for len 16384 reps 262144 = 10.374001 s
Old - Total for len 16384 reps 262144 = 15.266713 s
FFTW - Total for len 16384 reps 262144 = 12.341745 s
New - Total for len 65536 reps 8192 = 1.769812 s
Old - Total for len 65536 reps 8192 = 4.209413 s
FFTW - Total for len 65536 reps 8192 = 3.012365 s
New - Total for len 131072 reps 4096 = 1.942836 s
Old - Segfaults
FFTW - Total for len 131072 reps 4096 = 3.713713 s
Thanks to wbs for some simplifications, assembler fixes and a review
and to jannau for giving it a look.
It is unnecessary since ee551a21ddcbf81afe183d9489c534ee80f263a0;
but it was redundant even before that, because decode_simple_internal()
calls emms_c().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There's no warranty that vpx_codec_encode() will generate a list with the same
amount of packets for both the yuv planes encoder and the alpha plane encoder,
so queueing packets based on what the main encoder returns will fail when the
amount of packets in both lists differ.
Queue all data packets for every vpx_codec_encode() call from both encoders
before attempting to assemble output AVPackets out of them.
Fixes ticket #9884
Reviewed-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This is somewhat redundant with the is_decoded check. Maybe
there is a nicer solution
Fixes: Null pointer dereference
Fixes: 49584/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HEVC_fuzzer-5297367351427072
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: left shift of 192 by 24 places cannot be represented in type 'int'
Fixes: 49577/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MP1FLOAT_fuzzer-5205996678545408
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -1948269928 * 10 cannot be represented in type 'int'
Fixes: 49451/clusterfuzz-testcase-minimized-ffmpeg_dem_SUBVIEWER_fuzzer-6344614822412288
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
