Otherwise AVTimebaseSource gets av_apply_bitstream_filters' documentation in doxygen.
Signed-off-by: Max Weber <mii7303@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch deprecates anything that has to do with merging/splitting
side data. Automatic side data merging (and splitting), as well as all
API symbols involved in it, are removed completely.
Two FF_API_ defines are dedicated to deprecating API symbols related to
this: FF_API_MERGE_SD_API removes av_packet_split/merge_side_data in
libavcodec, and FF_API_LAVF_KEEPSIDE_FLAG deprecates
AVFMT_FLAG_KEEP_SIDE_DATA in libavformat.
Since it was claimed that changing the default from merging side data to
not doing it is an ABI change, there are two additional FF_API_ defines,
which stop using the side data merging/splitting by default (and remove
any code in avformat/avcodec doing this): FF_API_MERGE_SD in libavcodec,
and FF_API_LAVF_MERGE_SD in libavformat.
It is very much intended that FF_API_MERGE_SD and FF_API_LAVF_MERGE_SD
are quickly defined to 0 in the next ABI bump, while the API symbols are
retained for a longer time for the sake of compatibility.
AVFMT_FLAG_KEEP_SIDE_DATA will (very much intentionally) do nothing for
most of the time it will still be defined. Keep in mind that no code
exists that actually tries to unset this flag for any reason, nor does
such code need to exist. Code setting this flag explicitly will work as
before. Thus it's ok for AVFMT_FLAG_KEEP_SIDE_DATA to do nothing once
side data merging has been removed from libavformat.
In order to avoid that anyone in the future does this incorrectly, here
is a small guide how to update the internal code on bumps:
- next ABI bump (probably soon):
- define FF_API_LAVF_MERGE_SD to 0, and remove all code covered by it
- define FF_API_MERGE_SD to 0, and remove all code covered by it
- next API bump (typically two years in the future or so):
- define FF_API_LAVF_KEEPSIDE_FLAG to 0, and remove all code covered
by it
- define FF_API_MERGE_SD_API to 0, and remove all code covered by it
This forces anyone who actually wants packet side data to temporarily
use deprecated API to get it all. If you ask me, this is batshit fucked
up crazy, but it's how we roll. Making AVFMT_FLAG_KEEP_SIDE_DATA to be
set by default was rejected as an ABI change, so I'm going all the way
to get rid of this once and for all.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Public fields were added after the private fields (negating the entire
point of this). New private fields go into AVStreamInternal anyway.
The new marker was set by guessing which fields are supposed to be
private and wshich not. recommended_encoder_configuration is accessed by
ffserver_config.c directly, and is supposed to use the public API.
ffmpeg.c accesses AVStream.cur_dts, even though it's a private field,
but that seems to be an older error.
Allow all struct fields to be accessed directly, as long as they're
public.
Before this change, many fields were "public", but could be accessed via
AVOption only. This meant they were effectively not public, but were
present for documentation purposes, which was incredibly confusing at
best.
av_find_stream_info() was deprecated by avformat_find_stream_info(),
correct the warning message in the avformat_find_stream_info() and
comments in the avformat.h
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Functionally similar to av_packet_add_side_data(). Allows the use of an
already allocated buffer as stream side data.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Functionally similar to av_packet_add_side_data(). Allows the use of an
already allocated buffer as stream side data.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This allows a consumer to run the muxer's init function without actually
writing the header, which is useful in chained muxers that support
automatic bitstream filtering.
This is mostly useful for muxers that wrap other muxers, such as dashenc
and segment. The actual duplicated bitstream filtering is largely harmless,
but delaying the header can cause problems when the muxer intended the header
to be written to a separate file.
This will be used to allow writing file sequences using the tee output onto
multiple places in parallel
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This fixes part of Ticket5676
This fixes kodi, mpv, chromium and ffplay build against 3.0 and linked to 3.1
This is a similar ABI fix to 1eb43af1a0
Approved-by: BBB
Approved-by: jamrial
Approved-by: BtbN
Approved-by: nevcairiel
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e1eb0fc960163402bbb4e630185790488f7d28ed':
movenc: Use packets in interleaving queues for the duration at the end of fragments
Merged-by: Matthieu Bouron <matthieu.bouron@stupeflix.com>
Missing docs found by: nevcairiel
RFC: should we add support so that the C field names always work as av option names/keys ?
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
As long as caller only writes packets using av_interleaved_write_frame
with no manual flushing, this should allow us to always have accurate
durations at the end of fragments, since there should be at least
one queued packet in each stream (except for the stream where the
current packet is being written, but if the muxer itself does the
cutting of fragments, it also has info about the next packet for that
stream).
Signed-off-by: Martin Storsjö <martin@martin.st>
Until now, the decoding API was restricted to outputting 0 or 1 frames
per input packet. It also enforces a somewhat rigid dataflow in general.
This new API seeks to relax these restrictions by decoupling input and
output. Instead of doing a single call on each decode step, which may
consume the packet and may produce output, the new API requires the user
to send input first, and then ask for output.
For now, there are no codecs supporting this API. The API can work with
codecs using the old API, and most code added here is to make them
interoperate. The reverse is not possible, although for audio it might.
From Libav commit 05f66706d1.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Until now, the decoding API was restricted to outputting 0 or 1 frames
per input packet. It also enforces a somewhat rigid dataflow in general.
This new API seeks to relax these restrictions by decoupling input and
output. Instead of doing a single call on each decode step, which may
consume the packet and may produce output, the new API requires the user
to send input first, and then ask for output.
For now, there are no codecs supporting this API. The API can work with
codecs using the old API, and most code added here is to make them
interoperate. The reverse is not possible, although for audio it might.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '7fbb3b5b9857276b4cd17b2a530c7e0880d2bc0a':
lavf: use the io_open callbacks for files opened from open_input() as well
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
This also deprecates our old duplicated callbacks.
* commit '9f61abc8111c7c43f49ca012e957a108b9cc7610':
lavf: allow custom IO for all files
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Note to maintainers: update tools
Note to maintainers: set a default whitelist for your protocol
If that makes no sense then consider to set "none" and thus require the user to specify a white-list
for sub-protocols to be opened
Note, testing and checking for missing changes is needed
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
