FLAC streams originating from the FLAC encoder send updated and more
complete STREAMINFO metadata as part of the last packet, so write that
to CodecPrivate instead of the incomplete one available in extradata
during init.
Signed-off-by: James Almer <jamrial@gmail.com>
A negative extradata size for example gets passed to memcpy in
avcodec_parameters_from_context causing a segmentation fault.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This makes av_stream_add_side_data() consistent with av_packet_add_side_data().
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Functionally similar to av_packet_add_side_data(). Allows the use of an
already allocated buffer as stream side data.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
when parsing keyframe index metadata, list the message by trace log
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit e0c6b32046.
Said commit changed the behavior of the demuxer and decoder in a non
backwards compatible way.
Demuxers should make extradata available at init if possible, and send
new extradata as side data within a packet if needed.
A better fix for the remuxing crash will follow.
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes division by 0
This is similar to how avg_frame_rate is checked elsewhere
Fixes: 6d24add0455f41b1b45b7ba615cd46f3/asan_generic_dc34c3_5480_0a2ef411cae999b9871ed71a2e481b71.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '4f7723cb3b913c577842a5bb088c804ddacac8df':
movenc: Add an option for skipping writing the mfra/tfra/mfro trailer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '029cf99c5166b36f33381cd8ebfa5f1f1f463d1f':
mov: Save number of stsd elements after stream extradata allocation
Mostly noop, see 8b43ee4054
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '785c25443b56adb6dbbb78d68cccbd9bd4a42e05':
movenc: Apply offsets on timestamps when peeking into interleaving queues
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This prevents a division by zero in read_packet.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes valgrind warning about "Conditional jump or move depends on uninitialised value(s)"
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes https://trac.ffmpeg.org/ticket/5940#ticket
Reviewed-by: Michael Niedermayer <<michael@niedermayer.cc>>
Signed-off-by: Robert Nagy <ronag89@gmail.com>
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
It can read less than the requested amount, in which case buf contains
uninitialized data, causing problems like segmentation faults later on.
Also make sure that image->size is positive, so that it can't match a
negative error code.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Add keyframe index metadata
Used to facilitate seeking; particularly for HTTP pseudo streaming.
1. read live streaming or file by sequence
2. if use add_keyframe_index option, add a mark flag at the position,
use to insert new context at the last step.
3. add the keyframes *offset* and *timestamp* into a list
4. if use add_keyframe_index option, shift the metadata data from
mark flag offset
5. insert the keyframes *offset* and *timestamp* from the list by
sequence
6. free the list
7. end.
Add FATE test case;
Reviewed-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Steven Liu <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The code assumes that s->streams[0] is valid.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If the value is negative then it means padding at the start of the packet
instead of at the end.
Based on a patch by Hendrik Leppkes.
Reviewed-by: James Zern <jzern-at-google.com@ffmpeg.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Use the hls_close function to reduce code duplication.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This is needed for the following commit.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Commit 04964ac311 ("avformat/hls: Fix missing streams in some
cases with MPEG TS") caused a regression where subdemuxer streams that
use probing (e.g. dts/eac3/mp2 in mpegts) no longer get probed properly.
This is because the codec parameters from the subdemuxer stream, once
probed, are not passed on to the main stream.
Fix that by updating the codec parameters if the codec id changes.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
AVCodecParameters.sample_rate is a signed integer, so
XMVAudioPacket.sample_rate should be, too.
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Also check for errors from avpriv_mpeg4audio_get_config in
ff_mp4_read_dec_config_descr.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
fate-aac-al07_96 fails if sample_rate == 0 is rejected in
ff_mov_read_stsd_entries.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
