Avisynth is a non-unicode application and cannot accept UTF-8
characters. Therefore, the input filename should be converted to
the code page that it expects.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Partial fix for ticket #2412 in that using PIX_FMT_BGR24 fixes the
swapped channels issue when using scripts serving RGB24.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Dynamically loads the library itself, rather than through VfW.
Supports AvxSynth on Linux and OS X.
Supports the new colorspaces added in AviSynth 2.6 when used
with AviSynth 2.6.
* qatar/master:
flvdec: remove spurious use of stream id
lavf: deprecate r_frame_rate.
lavf: round estimated average fps to a "standard" fps.
Conflicts:
ffmpeg.c
ffprobe.c
libavformat/avformat.h
libavformat/electronicarts.c
libavformat/flvdec.c
libavformat/rawdec.c
libavformat/utils.c
tests/ref/fate/iv8-demux
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to its description, it is supposed to be the LCM of all the
frame durations. The usability of such a thing is vanishingly small,
especially since we cannot determine it with any amount of reliability.
Therefore get rid of it after the next bump.
Replace it with the average framerate where it makes sense.
FATE results for the wtv and xmv demux tests change. In the wtv case
this is caused by the file being corrupted (or possibly badly cut) and
containing invalid timestamps. This results in lavf estimating the
framerate wrong and making up wrong frame durations.
In the xmv case the file contains pts jumps, so again the estimated
framerate is far from anything sane and lavf again makes up different
frame durations.
In some other tests lavf starts making up frame durations from different
frame.
* qatar/master:
http: Add the url_shutdown function for https, too
http: Simplify code by removing a local variable
http: Clear the old URLContext pointer when closed
tcp: Try enabling SO_REUSEADDR when listening
tcp: Check the return values from bind and accept
avisynth: Make sure the filename passed to avisynth is in the right code page
Conflicts:
libavformat/http.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
avisynth is a non-unicode application and cannot accept UTF-8
characters. Therefore, the input filename should be converted to
the correct code page that it expects.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtpdec: Templatize the code for different g726 bitrate variants
rv40: move loop filter to rv34dsp context
lavf: make av_set_pts_info private.
rtpdec: Add support for G726 audio
rtpdec: Add an init function that can do custom codec context initialization
avconv: make copy_tb on by default.
matroskadec: don't set codec timebase.
rmdec: don't set codec timebase.
avconv: compute next_pts from input packet duration when possible.
lavf: estimate frame duration from r_frame_rate.
avconv: update InputStream.pts in the streamcopy case.
Conflicts:
avconv.c
libavdevice/alsa-audio-dec.c
libavdevice/bktr.c
libavdevice/fbdev.c
libavdevice/libdc1394.c
libavdevice/oss_audio.c
libavdevice/v4l.c
libavdevice/v4l2.c
libavdevice/vfwcap.c
libavdevice/x11grab.c
libavformat/au.c
libavformat/eacdata.c
libavformat/flvdec.c
libavformat/mpegts.c
libavformat/mxfenc.c
libavformat/rtpdec_g726.c
libavformat/wtv.c
libavformat/xmv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (44 commits)
replacement Indeo 3 decoder
gsm demuxer: do not allocate packet twice.
flvenc: use first packet delay as global delay.
ac3enc: doxygen update.
imc: return error codes instead of 0 for error conditions.
imc: return meaningful error codes instead of -1
imc: do not set channel layout for stereo
imc: validate channel count
imc: check for ff_fft_init() failure
imc: check output buffer size before decoding
imc: use DSPContext.bswap16_buf() to byte-swap packet data
rtsp: add allowed_media_types option
libgsm: add flush function to reset the decoder state when seeking
libgsm: simplify decoding by using a loop
gsm: log error message when packet is too small
libgsmdec: do not needlessly set *data_size to 0
gsmdec: do not needlessly set *data_size to 0
gsmdec: add flush function to reset the decoder state when seeking
libgsmdec: check output buffer size before decoding
gsmdec: log error message when output buffer is too small.
...
Conflicts:
Changelog
ffplay.c
libavcodec/indeo3.c
libavcodec/mjpeg_parser.c
libavcodec/vp3.c
libavformat/cutils.c
libavformat/id3v2.c
libavutil/parseutils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
presets: rename presets directory
lavc: make avcodec_get_context_defaults3 "officially" public
lavf: replace av_new_stream->avformat_new_stream part II.
lavf,lavd: replace av_new_stream->avformat_new_stream part I.
lavf: add avformat_new_stream as a replacement for av_new_stream.
Use correct scaling table for bwd-pred MVs in second B-field
Ut Video decoder
Makefile: change presets extension to .avpreset
lavfi: add rgbtestsrc source, ported from MPlayer libmpcodecs
lavfi: add testsrc source
AVOptions: add documentation.
presets: update libx264 ffpresets
Conflicts:
Changelog
doc/APIchanges
doc/ffmpeg.texi
ffpresets/libx264-ipod320.ffpreset
ffpresets/libx264-ipod640.ffpreset
ffserver.c
libavcodec/avcodec.h
libavcodec/options.c
libavcodec/version.h
libavdevice/libdc1394.c
libavfilter/avfilter.h
libavfilter/vsrc_testsrc.c
libavformat/flvdec.c
libavformat/riff.c
libavformat/version.h
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Manual replacements are done in this commit.
In many cases, the id is some constant made up number (e.g. 0 for video
and 1 for audio), which is then not used in the demuxer for anything.
Those ids are removed.
* qatar/master:
ffmpeg: fix some indentation
ffmpeg: fix operation with --disable-avfilter
simple_idct: remove disabled code
motion_est: remove disabled code
vc1: remove disabled code
fate: separate lavf-mxf_d10 test from lavf-mxf
cabac: Move code only used in the cabac test program to cabac.c.
ffplay: warn that -pix_fmt is no longer working, suggest alternative
ffplay: warn that -s is no longer working, suggest alternative
lavf: rename enc variable in utils.c:has_codec_parameters()
lavf: use designated initialisers for all (de)muxers.
wav: remove a use of deprecated AV_METADATA_ macro
rmdec: remove useless ap parameter from rm_read_header_old()
dct-test: remove write-only variable
des: fix #if conditional around P_shuffle
Use LOCAL_ALIGNED in ff_check_alignment()
Conflicts:
ffmpeg.c
libavformat/avidec.c
libavformat/matroskaenc.c
libavformat/mp3enc.c
libavformat/oggenc.c
libavformat/utils.c
tests/ref/lavf/mxf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This also lists the objects from those two libraries as internal (by adding
the ff_ prefix) so that they can then be hidden via linker scripts.
(cherry picked from commit c6610a216e)
patch by Stefano Sabatini, stefano.sabatini-lala poste.it
along with some spelling/consistency fixes for the long names by me
Originally committed as revision 13649 to svn://svn.ffmpeg.org/ffmpeg/trunk
Patch by Steve Lhomme % slhomme AH divxcorp P com %
Original thread:
Date: Sep 27, 2006 7:20 PM
Subject: [Ffmpeg-devel] [PATCH] AVISynth support for some MS DIB formats
Originally committed as revision 6411 to svn://svn.ffmpeg.org/ffmpeg/trunk
