In non-blocking mode, lowest-level read protocols are
supposed block only for a short amount of time to let
retry_transfer_wrapper() check for interrupts.
Also, checking the interrupt_callback in the receiving thread is
wrong, as interrupt_callback is not guaranteed to be thread-safe
and the job is already done by retry_transfer_wrapper(). The error
code was also incorrect.
Bug reported by Andrey Utkin.
* qatar/master:
dxa: remove useless code
lavf: don't select an attached picture as default stream for seeking.
avconv: remove pointless checks.
avconv: check for get_filtered_frame() failure.
avconv: remove a pointless check.
swscale: convert hscale() to use named arguments.
x86inc: add *mp named argument support to DEFINE_ARGS.
swscale: convert hscale to cpuflags().
Conflicts:
ffmpeg.c
libswscale/x86/scale.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids problems
where avio_tell() returns 0. I've updated all the checks against
cluster_pos
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
doc/general: update supported devices table.
doc/general: add missing @tab to codecs table.
h264: Fix invalid interlaced/progressive MB combinations for direct mode prediction.
avconv: reindent
avconv: link '-passlogfile' option to libx264 'stats' AVOption.
libx264: add 'stats' private option for setting 2pass stats filename.
libx264: fix help text for slice-max-size option.
http: Clear the auth state on redirects
http: Retry auth if it failed due to being stale
rtsp: Resend new keepalive commands if they used stale auth
rtsp: Retry authentication if failed due to being stale
httpauth: Parse the stale field in digest auth
dxva2_vc1: pass the overlap flag to the decoder
dxva2_vc1: fix decoding of BI frames
FATE: add shorthand to wavpack test
dfa: convert to bytestream2 API
anm decoder: move buffer allocation from decode_init() to decode_frame()
h264: improve parsing of broken AVC SPS
Conflicts:
ffmpeg.c
libavcodec/anm.c
libavcodec/dfa.c
libavcodec/h264.c
libavcodec/h264_direct.c
libavcodec/h264_ps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow up to 4 retries for normal requests, where both the
proxy and the target server might need to authenticate.
Signed-off-by: Martin Storsjö <martin@martin.st>
These commands are sent asynchronously, not waiting for the reply.
This reply is parsed later by ff_rtsp_tcp_read_packet or
udp_read_packet. If the reply indicates that we used stale
authentication and need to use a new nonce, resend a new keepalive
command immediately.
This is the only request sent asynchronously, so currently there's
no other command that needs to be resent in the same way.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
pcm-mpeg: convert to bytestream2 API
Revert "h264: clear trailing bits in partially parsed NAL units"
remove iwmmxt optimizations
mimic: do not continue if swap_buf_size is 0
mimic: convert to bytestream2 API
frwu: use MKTAG to check marker instead of AV_RL32
txd: port to bytestream2 API
c93: convert to bytestream2 API
iff: make .long_name more descriptive
FATE: add test for cdxl demuxer
rtsp: Fix a typo
Conflicts:
libavcodec/arm/dsputil_iwmmxt.c
libavcodec/arm/dsputil_iwmmxt_rnd_template.c
libavcodec/arm/mpegvideo_iwmmxt.c
libavcodec/c93.c
libavcodec/txd.c
libavutil/arm/cpu.c
tests/fate/demux.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to video_file_format_spec_v10_1.pdf flv stores AAC RAW
thanks to Baptiste Coudurier for pointing that out
thanks to Aℓex Converse for explaining:
This can't be at the start of a non-ADTS payload. 111 is the
EndOfFrame syntax element.
Together these proof that the check was correctly rejecting ADTS which
is not supposed to be in flv. Many players are able to play such ADTS
in flv though but its better if we conform to the spec as this should
ensure that not many but all players can play files generated by ffmpeg.
This reverts commit 3c9a86df0e.
mpjpeg video streamings would break and stop on Firefox after 1 - 30
seconds.
In order to fix this, two changes were made:
1. Replaced all occurrences of '\n' character in mjpeg metadata
with occurences of "\r\n".
2. Added "Content-length: <packet-size>" metadata entry for each
sent frame.
The change has been tested on Google Chrome 17.0.963.78 and Firefox 10.0.2
on lubuntu 11.10 and the streaming seems to work fine now.
* qatar/master:
Fix a bunch of common typos.
build: Skip compiling xvmc.h under the correct condition.
configure: darwin: Change dylib install names to include major version.
mpegts: Always honor a registration descriptor if present and there is no other codec information.
aacdec: Fix SCE parity check.
aacdec: Fix out of array writes (stack).
rtsp: Only set the ttl parameter if the server actually gave a value
udp: Set ttl for read-write streams, too, not only for write-only ones
udp: Only bind to the multicast address if in read-only mode
udp: Clarify the comment about binding the multicast address
udp: Reorder comments
Conflicts:
libavcodec/aacdec.c
tools/patcheck
Merged-by: Michael Niedermayer <michaelni@gmx.at>
With this we can always know if a timestamp is based on added durations
from an unknown origin or if it is based on a correct timestamp (and possibly
added durations)
This should fix some bugs where this distinction was mixed up.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes sending back RTCP RR packets if receiving RTP over
multicast.
If the multicast stream is sent on demand (set up and signalled
via RTSP), the sender might depend on getting RTCP RR packets
knowing that there are listeners, otherwise the stream can be
closed after a certain timeout.
This fixes receiving RTSP streams over multicast on unix, from
certain Axis cameras.
Signed-off-by: Martin Storsjö <martin@martin.st>
When this code was added in 36b532815c, the new code was added
between the existing comment and the existing line of code, making
the old comment seem to refer to the new code. This makes it read
correctly.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes trac #1045.
Thanks to Peter Ross for his help with this patch.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The ogg decoder wasn't padding the input buffer with the appropriate
FF_INPUT_BUFFER_PADDING_SIZE bytes. Which led to uninitialized reads in
various pieces of parsing code when they thought they had more data than
they actually did.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
* qatar/master: (29 commits)
sbrdsp.asm: convert all instructions to float/SSE ones.
dv: cosmetics.
dv: check buffer size before reading profile.
Revert "AAC SBR: group some writes."
udp: Print an error message if bind fails
cook: extend channel uncoupling tables so the full bit range is covered.
roqvideo: cosmetics.
roqvideo: convert to bytestream2 API.
dca: don't use av_clip_uintp2().
wmall: fix build with -DDEBUG enabled.
smc: port to bytestream2 API.
AAC SBR: group some writes.
dsputil: remove shift parameter from scalarproduct_int16
SBR DSP: unroll sum_square
rv34: remove dead code in intra availability check
rv34: clean a bit availability checks.
v4l2: update documentation
tgq: convert to bytestream2 API.
parser: remove forward declaration of MpegEncContext
dca: prevent accessing static arrays with invalid indexes.
...
Conflicts:
doc/indevs.texi
libavcodec/Makefile
libavcodec/dca.c
libavcodec/dvdata.c
libavcodec/eatgq.c
libavcodec/mmvideo.c
libavcodec/roqvideodec.c
libavcodec/smc.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The "ECs != 1 -> OP1a" assumption was wrong. Luckily, the file that triggered
that behavior had two ECs, not zero. Hence distinguishing between them is
simple in this case.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes rare cases where OPAtom may be treated as OP1a, causing all essence
to be read into RAM.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (31 commits)
cdxl demux: do not create packets with uninitialized data at EOF.
Replace computations of remaining bits with calls to get_bits_left().
amrnb/amrwb: Remove get_bits usage.
cosmetics: reindent
avformat: do not require a pixel/sample format if there is no decoder
avformat: do not fill-in audio packet duration in compute_pkt_fields()
lavf: Use av_get_audio_frame_duration() in get_audio_frame_size()
dca_parser: parse the sample rate and frame durations
libspeexdec: do not set AVCodecContext.frame_size
libopencore-amr: do not set AVCodecContext.frame_size
alsdec: do not set AVCodecContext.frame_size
siff: do not set AVCodecContext.frame_size
amr demuxer: do not set AVCodecContext.frame_size.
aiffdec: do not set AVCodecContext.frame_size
mov: do not set AVCodecContext.frame_size
ape: do not set AVCodecContext.frame_size.
rdt: remove workaround for infinite loop with aac
avformat: do not require frame_size in avformat_find_stream_info() for CELT
avformat: do not require frame_size in avformat_find_stream_info() for MP1/2/3
avformat: do not require frame_size in avformat_find_stream_info() for AAC
...
Conflicts:
doc/APIchanges
libavcodec/Makefile
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/h264_ps.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/dsputil_mmx.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
All colorspaces are supported.
Renamed libutvideo.cpp to libutvideodec.cpp.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also, do not keep trying to find and open a decoder in try_decode_frame() if
we already tried and failed once.
Fixes always searching until max_analyze_duration in
avformat_find_stream_info() when demuxing codecs without a decoder.
Also, do not give AVCodecContext.frame_size priority for muxing.
Updated 2 FATE references:
dxa-feeble - adds 1 audio frame that is still within 2 seconds as specified
by -t 2 in the FATE test
wmv8-drm-nodec - durations are not needed. previously they were estimated
using the packet size and average bit rate.
It is unnecessary. Also, for some codecs we're reading more than 1 frame per
packet. Instead we use a private context variable to calculate the bit rate,
stream duration, and packet durations.
Updated FATE seek test, which has slightly different timestamps due to a
more accurate bit rate calculation.
For encoding, frame_size is not a reliable indicator of packet duration.
Also, we don't want to have to force the demuxer to find frame_size for
stream copy to work.
Split off packet parsing into a separate function. Parse full packets at
once and store them in a queue, eliminating the need for tracking
parsing state in AVStream.
The horrible unreadable loop in read_frame_internal() now isn't weirdly
ordered and doesn't contain evil gotos, so it should be much easier to
understand.
compute_pkt_fields() now invents slightly different timestamps for two
raw vc1 tests, due to has_b_frames being set a bit later. They shouldn't
be more wrong (or right) than previous ones.
Make packet buffer a parameter, don't hardcode it to be
AVFormatContext.packet_buffer.
Also move the function higher in the file, since it will be called from
read_frame_internal().
This fixes issues when the bitrate is variable or inaccurate but the
frame size has not been determined yet.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
tiertexseq: set correct block_align for audio
tiertexseq: set audio stream start time to 0
voc/avs: Do not change the sample rate mid-stream.
segafilm: use the sample rate as the time base for audio streams
ea: fix audio pts
psx-str: fix audio pts
vqf: set packet duration
tta demuxer: set packet duration
mpegaudio_parser: do not ignore information from the first parsed frame
mpegaudio_parser: be less picky about the start position
thp: set audio packet durations
avcodec: add a Vorbis parser to get packet duration
vorbisdec: read the previous window flag for long windows
lavc: free the output packet when encoding failed or produced no output.
lavc: preserve avpkt->destruct in ff_alloc_packet().
lavc: clarify the meaning of AVCodecContext.frame_number.
mpegts: Pad the packet buffer in handle_packet().
mpegts: Do not call read_sl_header() when no bytes remain in the buffer.
Conflicts:
libavcodec/mpegaudio_parser.c
libavcodec/version.h
libavformat/mpegts.c
tests/ref/fate/pva-demux
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The time base is 1 / sample_rate, not 90000.
Several more codecs encode the sample count in the first 4 bytes of the
chunk, so we set the durations accordingly. Also, we can set start_time and
packet duration instead of keeping track of the sample count in the demuxer.
Fixes timestamp calculation.
The FATE reference is updated because timestamp calculations are now more
accurate. Previous timestamps were based on average bit rate.
This allows it to be used with get_bits without the thread of overreads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master: (29 commits)
amrwb: remove duplicate arguments from extrapolate_isf().
amrwb: error out early if mode is invalid.
h264: change underread for 10bit QPEL to overread.
matroska: check buffer size for RM-style byte reordering.
vp8: disable mmx functions with sse/sse2 counterparts on x86-64.
vp8: change int stride to ptrdiff_t stride.
wma: fix invalid buffer size assumptions causing random overreads.
Windows Media Audio Lossless decoder
rv10/20: Fix slice overflow with checked bitstream reader.
h263dec: Disallow width/height changing with frame threads.
rv10/20: Fix a buffer overread caused by losing track of the remaining buffer size.
rmdec: Honor .RMF tag size rather than assuming 18.
g722: Fix the QMF scaling
r3d: don't set codec timebase.
electronicarts: set timebase for tgv video.
electronicarts: parse the framerate for cmv video.
ogg: don't set codec timebase
electronicarts: don't set codec timebase
avs: don't set codec timebase
wavpack: Fix an integer overflow
...
Conflicts:
libavcodec/arm/vp8dsp_init_arm.c
libavcodec/fraps.c
libavcodec/h264.c
libavcodec/mpeg4videodec.c
libavcodec/mpegvideo.c
libavcodec/msmpeg4.c
libavcodec/pnmdec.c
libavcodec/qpeg.c
libavcodec/rawenc.c
libavcodec/ulti.c
libavcodec/vcr1.c
libavcodec/version.h
libavcodec/wmalosslessdec.c
libavformat/electronicarts.c
libswscale/ppc/yuv2rgb_altivec.c
tests/ref/acodec/g722
tests/ref/fate/ea-cmv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The container has no timestamps and the framerate isn't stored in the
data either.
The decoder sets codec timebase to experimentally found value 1/15. Do
the same for the demuxer too, it should at least be better than the
default 1/90000.
This fixes duplicate timestamps on mp2 in ts with non seekable input.
It also fixed the fate pva demux timestamps.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The fields "Number of Bytes" and "Number of Frames" are mixed up. "Bytes"
come first, "Frames" behind.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Alex Converse <alex.converse@gmail.com>
* qatar/master:
h264: error out on invalid bitdepth.
aacsbr: use a swap index for the Y matrix rather than copy buffers.
huffyuv: do not abort on unknown pix_fmt; instead, return an error.
lcl: return negative error codes on decode_init() errors.
rtpenc: Use MB info side data for splitting H263 packets for RFC 2190
h263enc: Add an option for outputting info about MBs as side data
avpacket: Add a function for shrinking already allocated side data
nellymoserdec: Saner and faster IMDCT windowing
Conflicts:
doc/APIchanges
libavcodec/avpacket.c
libavcodec/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the packetization spec compliant for cases where one single
GOB doesn't fit into an RTP packet.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (58 commits)
amrnbdec: check frame size before decoding.
cscd: use negative error values to indicate decode_init() failures.
h264: prevent overreads in intra PCM decoding.
FATE: do not decode audio in the nuv test.
dxa: set audio stream time base using the sample rate
psx-str: do not allow seeking by bytes
asfdec: Do not set AVCodecContext.frame_size
vqf: set packet parameters after av_new_packet()
mpegaudiodec: use DSPUtil.butterflies_float().
FATE: add mp3 test for sample that exhibited false overreads
fate: add cdxl test for bit line plane arrangement
vmnc: return error on decode_init() failure.
libvorbis: add/update error messages
libvorbis: use AVFifoBuffer for output packet buffer
libvorbis: remove unneeded e_o_s check
libvorbis: check return values for functions that can return errors
libvorbis: use float input instead of s16
libvorbis: do not flush libvorbis analysis if dsp state was not initialized
libvorbis: use VBR by default, with default quality of 3
libvorbis: fix use of minrate/maxrate AVOptions
...
Conflicts:
Changelog
doc/APIchanges
libavcodec/avcodec.h
libavcodec/dpxenc.c
libavcodec/libvorbis.c
libavcodec/vmnc.c
libavformat/asfdec.c
libavformat/id3v2enc.c
libavformat/internal.h
libavformat/mp3enc.c
libavformat/utils.c
libavformat/version.h
libswscale/utils.c
tests/fate/video.mak
tests/ref/fate/nuv
tests/ref/fate/prores-alpha
tests/ref/lavf/ffm
tests/ref/vsynth1/prores
tests/ref/vsynth2/prores
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes cases where the user had specified one desired MTU
via an option, and the protocol indicates another one.
Signed-off-by: Martin Storsjö <martin@martin.st>
Frame sizes in ID3v2.3 are not synchsafe, they are simply 32be numbers.
In practice this bug is not noticeable unless the frame size takes more
than 7 bits (which is almost never for text frames).
Seeking back on EOF will reset the EOF flag, causing us to re-enter
the loop to find the next marker in the ASF file, thus potentially
causing an infinite loop.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master:
adpcm: Clip step_index values read from the bitstream at the beginning of each frame.
oma: don't read beyond end of leaf_table.
doxygen: Remove documentation for non-existing parameters; misc small fixes.
Indeo3: fix crashes on corrupt bitstreams.
msmpeg4: Replace forward declaration by proper #include.
segment: implement wrap around
avf: reorder AVStream and AVFormatContext
aacdec: Remove erroneous reference to global gain from the out of bounds scalefactor error message.
Conflicts:
libavcodec/indeo3.c
libavformat/avformat.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The properties of the CDCI Descriptor are insufficient to specify
the pixel format for uncompressed picture data. SMPTE 377-1 and
RP224v10 have defined a set of picture coding labels to indicate what
formatting was used.
This patch uses 2 labels to detect UYVY422 or YUYV422 pixel formats.
It defaults to UYVY422 for 8-bit 4:2:2 pictures to support files
that were created before the coding labels were introduced ~2008
The codec pix_fmt default was changed from 0 (PIX_FMT_YUV420P) to
-1 (PIX_FMT_NONE)
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This supports detection of uncompressed picture in files that
didn't include a Picture Coding Label. The lables weren't
available until SMPTE 377-1 and RP224v10
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This matches the order used for the index table edit rate.
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Must check all 16 bytes because there is a planar 10-bit format
label that has equal first 15 bytes
Review-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Provide a way to wrap around the segment index so pseudostreaming
live through a web server and html5 browser is simpler.
Also ensure that 0 (disable) is a valid value across the options
providing wrap around.
* qatar/master:
avcodec_default_reget_buffer(): fix compilation in DEBUG mode
fate: Overhaul WavPack coverage
h264: fix mmxext chroma deblock to use correct TC values.
flvdec: Remove the now redundant check for known broken metadata creator
flvdec: Validate index entries added from metadata while reading
rtsp: Handle requests from server to client
movenc: use timestamps instead of frame_size for samples-per-packet
movenc: use the first cluster duration as the tfhd default duration
movenc: factorize calculation of cluster duration into a separate function
doc/APIchanges: fill in missing dates and hashes.
lavc: reorder AVCodecContext fields.
lavc: reorder AVFrame fields.
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavformat/flvdec.c
libavformat/movenc.c
tests/fate/lossless-audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
By validating the index entries while reading, we don't need to
seek at startup to validate the entries. If the error in the
index entries is not pointing to (our definition of) the start
of packets, and there is an index entry pointing at some of the
first packets after the metadata, the invalid index can be discarded
almost immediately.
Signed-off-by: Martin Storsjö <martin@martin.st>
This returns 200 OK for OPTIONS requests and 501 Not Implemented
for all other requests.
Even though this doesn't do much actual handling of the requests,
it makes the code properly identify server requests as such, instead
of interpreting it as a reply to the client's request as it did
before.
Signed-off-by: Martin Storsjö <martin@martin.st>
For encoding, AVCodecContext.frame_size is the number of input samples to
send to the encoder and does not necessarily correspond directly to the
timestamps of the output packets.
* qatar/master: (34 commits)
mlp_parser: fix the channel mask value used for the top surround channel
vorbisenc: check all allocations for failure
roqaudioenc: return AVERROR codes instead of -1
roqaudioenc: set correct bit rate
roqaudioenc: use AVCodecContext.frame_size correctly.
roqaudioenc: remove unneeded sample_fmt check
ra144enc: use int16_t* for input samples rather than void*
ra144enc: set AVCodecContext.coded_frame
ra144enc: remove unneeded sample_fmt check
nellymoserenc: set AVCodecContext.coded_frame
nellymoserenc: improve error checking in encode_init()
nellymoserenc: return AVERROR codes instead of -1
libvorbis: improve error checking in oggvorbis_encode_init()
mpegaudioenc: return AVERROR codes instead of -1
libfaac: improve error checking and handling in Faac_encode_init()
avutil: add AVERROR_UNKNOWN
check for coded_frame allocation failure in several audio encoders
audio encoders: do not set coded_frame->key_frame.
g722enc: check for trellis data allocation error
libspeexenc: export encoder delay through AVCodecContext.delay
...
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavcodec/fraps.c
libavcodec/kgv1dec.c
libavcodec/libfaac.c
libavcodec/libgsm.c
libavcodec/libvorbis.c
libavcodec/mlp_parser.c
libavcodec/roqaudioenc.c
libavcodec/vorbisenc.c
libavutil/avutil.h
libavutil/error.c
libavutil/error.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This prevents certain tags with a default value assigned to them (as per
the EBML syntax elements) from ever being assigned a NULL value. Other
parts of the code rely on these being non-NULL (i.e. they don't check for
NULL before e.g. using the string in strcmp() or similar), and thus in
effect this prevents crashes when reading of such specific tags fails,
either because of low memory or because of targeted file corruption.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* qatar/master:
docs: use -bsf:[vas] instead of -[vas]bsf.
mpegaudiodec: Prevent premature clipping of mp3 input buffer.
lavf: move the packet keyframe setting code.
oggenc: free comment header for all codecs
lcl: error out if uncompressed input buffer is smaller than framesize.
mjpeg: abort decoding if packet is too large.
golomb: use HAVE_BITS_REMAINING() macro to prevent infloop on EOF.
get_bits: add HAVE_BITS_REMAINING macro.
lavf/output-example: use new audio encoding API correctly.
lavf/output-example: more proper usage of the new API.
tiff: Prevent overreads in the type_sizes array.
tiff: Make the TIFF_LONG and TIFF_SHORT types unsigned.
apetag: do not leak memory if avio_read() fails
apetag: propagate errors.
SBR DSP x86: implement SSE sbr_hf_g_filt
SBR DSP x86: implement SSE sbr_sum_square_sse
SBR DSP: use intptr_t for the ixh parameter.
Conflicts:
doc/bitstream_filters.texi
doc/examples/muxing.c
doc/ffmpeg.texi
libavcodec/golomb.h
libavcodec/x86/Makefile
libavformat/oggenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
compute_pkt_fields() is for unreliable estimates or guessing. The
keyframe information from the parser is (at least in theory) reliable,
so it should be used even when the other guessing is disabled with the
AVFMT_FLAG_NOFILLIN flag.
Therefore, move setting the packet keyframe flag based on parser
information from compute_pkt_fields() to read_frame_internal().
fixes a memleak for Vorbis and Theora, where the comment header from
avpriv_split_xiph_headers() is replaced by a buffer that must be freed
separately.
* qatar/master: (40 commits)
swf: check return values for av_get/new_packet().
wavpack: Don't shift minclip/maxclip
rtpenc: Expose the max packet size via an avoption
rtpenc: Move max_packet_size to a context variable
rtpenc: Add an option for not sending RTCP packets
lavc: drop encode() support for video.
snowenc: switch to encode2().
snowenc: don't abuse input picture for storing information.
a64multienc: switch to encode2().
a64multienc: don't write into output buffer when there's no output.
libxvid: switch to encode2().
tiffenc: switch to encode2().
tiffenc: properly forward error codes in encode_frame().
lavc: drop libdirac encoder.
gifenc: switch to encode2().
libvpxenc: switch to encode2().
flashsvenc: switch to encode2().
Remove libpostproc.
lcl: don't overwrite input memory.
swscale: take first/lastline over/underflows into account for MMX.
...
Conflicts:
.gitignore
Makefile
cmdutils.c
configure
doc/APIchanges
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/libdiracenc.c
libavcodec/libxvidff.c
libavcodec/qtrleenc.c
libavcodec/tiffenc.c
libavcodec/utils.c
libavformat/mov.c
libavformat/movenc.c
libpostproc/Makefile
libpostproc/postprocess.c
libpostproc/postprocess.h
libpostproc/postprocess_altivec_template.c
libpostproc/postprocess_internal.h
libpostproc/postprocess_template.c
libswscale/swscale.c
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows opting for a lower MTU than what the AVIOContext
indicated, and allows writing into outputs that don't indicate
an MTU at all (such as plain files, which is useful for testing).
This also allows querying for the MTU via the avoption.
Signed-off-by: Martin Storsjö <martin@martin.st>
According to newer RFCs, this packetization scheme should only
be used for interfacing with legacy systems.
Implementing this packetization mode properly requires parsing
the full H263 bitstream to find macroblock boundaries (and knowing
their macroblock and gob numbers and motion vector predictors).
This implementation tries to look for GOB headers (which
can be inserted by using -ps <small number>), but if the GOBs
aren't small enough to fit into the MTU, the packetizer blindly
splits packets at any offset and claims it to be a GOB boundary
(by using Mode A from the RFC). While not correct, this seems
to work with some receivers.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
dxva2: don't check for DXVA_PictureParameters->wDecodedPictureIndex
img2: split muxer and demuxer into separate files
rm: prevent infinite loops for index parsing.
aac: fix infinite loop on end-of-frame with sequence of 1-bits.
mov: Add more HDV and XDCAM FourCCs.
lavf: don't set AVCodecContext.has_b_frames in compute_pkt_fields().
rmdec: when using INT4 deinterleaving, error out if sub_packet_h <= 1.
cdxl: correctly synchronize video timestamps to audio
mlpdec_parser: fix a few channel layouts.
Add channel names to channel_names[] array for channels added in b2890f5
movenc: Buffer the mdat for the initial moov fragment, too
flvdec: Ignore the index if the ignidx flag is set
flvdec: Fix indentation
movdec: Don't parse all fragments if ignidx is set
movdec: Restart parsing root-level atoms at the right spot
prores: use natural integer type for the codebook index
mov: Add support for MPEG2 HDV 720p24 (hdv4)
swscale: K&R formatting cosmetics (part I)
swscale: variable declaration and placement cosmetics
Conflicts:
configure
libavcodec/aacdec.c
libavcodec/mlp_parser.c
libavformat/flvdec.c
libavformat/img2.c
libavformat/isom.h
libavformat/mov.c
libavformat/movenc.c
libswscale/rgb2rgb.c
libswscale/rgb2rgb_template.c
libswscale/yuv2rgb.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Specifically, prevent jumping back in the file for the next index, since
this can lead to infinite loops where we jump between indexes referring
to each other, and don't read indexes that don't fit in the file.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
It is not supposed to be done outside lavc.
This is basically a revert of 818062f2f3.
It is unclear what issue this was supposed to fix, if it reappears again
it will have to be fixed in a more proper place.
The wtv-demux test change is because the sample starts with a B-frame.
We read sub_packet_h / 2 packets per line of data (during deinterleaving),
which equals zero if sub_packet_h <= 1, thus causing us to not read any
data, leading to an infinite loop.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
This allows writing QuickTime-compatible fragmented mp4 (with
a non-empty moov atom) to a non-seekable output.
This buffers the mdat for the initial fragment just as it does
for all normal fragments, too. Previously, the resulting
atom structure was mdat,moov, moof,mdat ..., while it now
is moov,mdat, moof,mdat.
Signed-off-by: Martin Storsjö <martin@martin.st>
In nonseekable files, we already stop parsing the toplevel atoms
after finding moov and one mdat. In large seekable files (or files
that are seekable, but slowly, e.g. http), reading all the fragments
at the start can take a considerable amount of time. This allows
opting out from this behaviour.
Signed-off-by: Martin Storsjö <martin@martin.st>
If parsing moov+mdat in a non-seekable file, we currently
abort parsing directly after parsing the header of the mdat
atom. If we want to continue parsing later (if looking to
parse later fragments), we need to skip past the content of the
mdat atom, otherwise we end up parsing the content of the mdat
atom as root level atoms.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
mpegvideo_enc: only allocate output packet when we know there will be output
Add names for more channel layouts to the channel layout map.
sunrast: Add a sample request for RMP_RAW colormap.
avcodec: do not override pts or duration from the audio encoder
Add prores regression test.
Enable already existing rso regression test.
Add regression test for "sox" format muxer/demuxer.
Add dpx encoding regression test.
swscale: K&R formatting cosmetics for PowerPC code (part I/II)
img2: Use ff_guess_image2_codec(filename) shorthand where appropriate.
Clarify licensing information about files borrowed from libjpeg.
Mark mutable static data const where appropriate.
avplay: fix -threads option
dvbsubdec: avoid undefined signed left shift in RGBA macro
mlpdec: use av_log_ask_for_sample()
gif: K&R formatting cosmetics
png: make .long_name more descriptive
movdec: Adjust keyframe flagging in fragmented files
rv34: change most "int stride" into "ptrdiff_t stride".
Conflicts:
avprobe.c
ffplay.c
libavcodec/mlpdec.c
libavcodec/mpegvideo_enc.c
libavcodec/pngenc.c
libavcodec/x86/v210-init.c
libavfilter/vf_boxblur.c
libavfilter/vf_crop.c
libavfilter/vf_drawtext.c
libavfilter/vf_lut.c
libavfilter/vf_overlay.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavfilter/vf_select.c
libavfilter/vf_setpts.c
libavfilter/vf_settb.c
libavformat/img2.c
libavutil/audioconvert.c
tests/codec-regression.sh
tests/lavf-regression.sh
tests/ref/lavf/dpx
tests/ref/vsynth1/prores
tests/ref/vsynth2/prores
Merged-by: Michael Niedermayer <michaelni@gmx.at>
For video, mark the first sample in a trun which doesn't have the
sample-is-non-sync-sample flag set as a keyframe.
In particular, the "sample does not depend on other samples" flag
isn't enough to make it a keyframe, since later frames still can
reference frames prior to that one (the flag only says that that
particular frame doesn't depend on other frames).
This fixes bug 215.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (36 commits)
adpcmenc: Use correct frame_size for Yamaha ADPCM.
avcodec: add ff_samples_to_time_base() convenience function to internal.h
adx parser: set duration
mlp parser: set duration instead of frame_size
gsm parser: set duration
mpegaudio parser: set duration instead of frame_size
(e)ac3 parser: set duration instead of frame_size
flac parser: set duration instead of frame_size
avcodec: add duration field to AVCodecParserContext
avutil: add av_rescale_q_rnd() to allow different rounding
pnmdec: remove useless .pix_fmts
libmp3lame: support float and s32 sample formats
libmp3lame: renaming, rearrangement, alignment, and comments
libmp3lame: use the LAME default bit rate
libmp3lame: use avpriv_mpegaudio_decode_header() for output frame parsing
libmp3lame: cosmetics: remove some pointless comments
libmp3lame: convert some debugging code to av_dlog()
libmp3lame: remove outdated comment.
libmp3lame: do not set coded_frame->key_frame.
libmp3lame: improve error handling in MP3lame_encode_init()
...
Conflicts:
doc/APIchanges
libavcodec/libmp3lame.c
libavcodec/pcxenc.c
libavcodec/pnmdec.c
libavcodec/pnmenc.c
libavcodec/sgienc.c
libavcodec/utils.c
libavformat/hls.c
libavutil/avutil.h
libswscale/x86/swscale_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The parser was fixed so this workaround should no longer
be necessary.
This allows using stream-copy to fix files with keyframes
incorrectly marked.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This avoids reading any old data in the AVIOContext buffer after
the seek, and indicates to the mpegts demuxer that we've seeked,
avoiding continuity check errors.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
doxy: remove reference to removed api
examples: unbreak compilation
ttadec: cosmetics: reindent
sunrast: use RLE trigger macro inplace of the hard coded value.
sunrastenc: set keyframe flag for the output packet.
mpegvideo_enc: switch to encode2().
mpegvideo_enc: force encoding delay of at least 1 frame when low_delay=0
Conflicts:
doc/examples/muxing.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Enhance seeking by demuxing until the requested timestamp is
reached within the segment selected by the seek code using the
playlist info.
Some mpegts streams don't have dts set for all packets though,
this seeking method doesn't work well for that case.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
mov: Use defines for sample flags in fragments
mov: Use defines for trun flags
mov: Use defines for tfhd flags
proresenc: force bitrate not to exceed given limit
vc1parse: call vc1_init_common().
wma: don't return 0 on invalid packets.
asf: prevent packet_size_left from going negative if hdrlen > pktlen.
mjpegb: don't return 0 at the end of frame decoding.
rtpdec: Identify incorrectly signalled H263
vp8dsp: split long line.
aiff: don't skip block_align==0 check on COMM-after-SSND files.
dpcm: ignore extra unpaired bytes in stereo streams.
mp3on4: require a minimum framesize.
mpc7: assign an error level + context to av_log() msg.
huffyuv: error out on bit overrun.
dct-test: Add the missing ff_ prefix to the altivec functions
dct-test: Remove a stray declaration of a nonexistent function
movenc: Write the unknown duration as 64 bit fields in ismv
movenc: Write track durations with all bits set if duration is unknown
Conflicts:
libavcodec/dct-test.c
libavcodec/wmadec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The previous condition of 0 page size was wrong,
that would disable the mechanism for all frames at
a start of a page, thus some keyframes still would not
get their own granule.
The real problem is that header packets must not be flushed,
but they have (and must have) 0 granule and thus would
be detected as keyframes.
Add a separate parameter to mark header packets.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This prevents failed assertions further down in the packet processing
where we require non-negative values for packet_size_left.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
H263 in RTP can be packetized in two formats (RFC 2190, RFC
2429/4629). The former normally uses the static payload type 34,
while the latter normally uses dynamic payload types with the
SDP format names H263-1998 or H263-2000.
Look for packets that don't look like proper RFC 2190 packets and
switch to depacketizing them according to the new format if they
match some heuristic criteria.
Signed-off-by: Martin Storsjö <martin@martin.st>
In order to match Linux behaviour better our
Windows-specific open() replacement should disable
Windows default file locking.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This needs the extradata to be extracted.
The approach used is the one MPlayer uses, though it is
unclear whether the 4 bytes extradata that are skipped
should be skipped always or only for AAC.
The AAC parser must be disabled, too, otherwise playback
still does not work.
Fixes trac issue #547.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master: (22 commits)
als: prevent infinite loop in zero_remaining().
cook: prevent div-by-zero if channels is zero.
pamenc: switch to encode2().
svq1enc: switch to encode2().
dvenc: switch to encode2().
dpxenc: switch to encode2().
pngenc: switch to encode2().
v210enc: switch to encode2().
xwdenc: switch to encode2().
ttadec: use branchless unsigned-to-signed unfolding
avcodec: add a Sun Rasterfile encoder
sunrast: Move common defines to a new header file.
cdxl: fix video decoding for some files
cdxl: fix audio for some samples
apetag: add proper support for binary tags
ttadec: remove dead code
swscale: make access to filter data conditional on filter type.
swscale: update context offsets after removal of AlpMmxFilter.
prores: initialise encoder and decoder parts only when needed
swscale: make monowhite/black RGB-independent.
...
Conflicts:
Changelog
libavcodec/alsdec.c
libavcodec/dpxenc.c
libavcodec/golomb.h
libavcodec/pamenc.c
libavcodec/pngenc.c
libavformat/img2.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to 14496-12, the duration should be all 1s if
the duration is unknown. This is the case if writing a moov
atom without any samples described in it (e.g. as in ismv files).
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows handling matroska files with errors.
Fixes test4.mkv and test7.mkv from the official Matroska test suite.
These are also trac issues #544 and #545.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Muxing pcm audio in MOV using avcodec_encode_audio() was failing
because avcodec_encode_audio() returns an incorrect packet size of 4
bytes. This can be reproduced by modifying the sample
ffmpeg/doc/examples/muxing.c to encode PCM, see ML patch
muxing-test.diff
I git bisected and commit 89ddff92a3 is the one that broke this. In
mov_write_header() if st->codec->frame_size <= 1 it sets it to 1. Then
avcodec_encode_audio() sets frame->nb_samples = avctx->frame_size, and
frame->nb_samples of 1 is used to compute a packet size of 4 bytes.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
shorten: Use separate pointers for the allocated memory for decoded samples.
atrac3: Fix crash in tonal component decoding.
ws_snd1: Fix wrong samples counts.
movenc: Don't set a default sample duration when creating ismv
rtp: Factorize the check for distinguishing RTCP packets from RTP
golomb: avoid infinite loop on all-zero input (or end of buffer).
bethsoftvid: synchronize video timestamps with audio sample rate
bethsoftvid: add audio stream only after getting the first audio packet
bethsoftvid: Set video packet duration instead of accumulating pts.
bethsoftvid: set packet key frame flag for audio and I-frame video packets.
bethsoftvid: fix read_packet() return codes.
bethsoftvid: pass palette in side data instead of in a separate packet.
sdp: Ignore RTCP packets when autodetecting RTP streams
proresenc: initialise 'sign' variable
mpegaudio: replace memcpy by SIMD code
vc1: prevent using last_frame as a reference for I/P first frame.
Conflicts:
libavcodec/atrac3.c
libavcodec/golomb.h
libavcodec/shorten.c
libavcodec/ws-snd1.c
tests/ref/fate/bethsoft-vid
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to unofficial documentation, the video rate is locked to the audio
sample rate. This results in proper synchronization of audio and video
timestamps from the demuxer. This only works if the first audio packet occurs
before the first video packet or the audio sample rate is the default rate of
11111 Hz, both of which are true for all samples in our archive.
This avoids initializing a stream with dummy values or when the file does not
contain audio.
Also set duration for audio packets, using the sample rate as the time base.
Update FATE reference to account for now non-existent palette packet.
This also fixes the FATE test if frame data is not initialized in
get_buffer(), so update comment in avconv accordingly.
The rtp demuxer which listens for RTP packets and detects the
RTP payload type will currently get confused if the first packet
received is an RTCP packet. Thus ignore such packets.
Signed-off-by: Martin Storsjö <martin@martin.st>
Prefix the functions/tables brktimegm, pcm_read_seek,
dv_offset_reset, voc_get_packet, codec_movaudio_tags,
codec_movvideo_tags.
After this, lavf has no global symbols without the proper prefix.
Signed-off-by: Martin Storsjö <martin@martin.st>
