Unnecessary since acf63d5350adeae551d412db699f8ca03f7e76b9;
also avoids relocations.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For encoding, this field is entirely redundant with
AVCodecContext.framerate.
For decoding, this field is entirely redundant with
AV_CODEC_PROP_FIELDS.
CC libavcodec/libx265.o
libavcodec/libx265.c: In function ‘libx265_encode_frame’:
libavcodec/libx265.c:781:5: warning: this ‘else’ clause does not guard... [-Wmisleading-indentation]
else
^~~~
libavcodec/libx265.c:782:1: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘else’
FF_DISABLE_DEPRECATION_WARNINGS
^~~
Signed-off-by: Marton Balint <cus@passwd.hu>
This is intended to be a more convenient replacement for
reordered_opaque.
Add support for it in the two encoders that offer
AV_CODEC_CAP_ENCODER_REORDERED_OPAQUE: libx264 and libx265. Other
encoders will be supported in future commits.
Current code stores a pointer to allocated data in libx265 and frees it
when the encoded packet is retrieved. This will leak if the packet is
never retrieved, e.g. if the encoder is closed without being flushed.
Restructure the code such that only indices to an array stored in our
private data are given to libx265. This ensures no allocated memory can
be lost.
x265_sei is available since X265_BUILD 88. Bump required version
to 89 to fix the regression from commit 1f58503013, and remove a
conditional compilation.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
added a new option 'a53cc' (on by default, as in libx264) for rendering
AV_FRAME_DATA_A53_CC as hevc sei payloads.
the code is a blend of the libx265.c code for writing
AV_FRAME_DATA_SEI_UNREGISTERED with the libx264.c code for writing atsc
a/53 payloads.
It reduces typing: Before this patch, there were 105 codecs
whose long_name-definition exceeded the 80 char line length
limit. Now there are only nine of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is in preparation of switching the default init-thread-safety
to a codec being init-thread-safe.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently the format listing misses the J formats completely, yet
they are marked as supported in the encoder. Thus to make the logic
support them while not explicitly listing them, make the logic
utilize chroma subsampling information in both width and height
available through the pixel format descriptor.
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This structure is no longer declared in a public header,
so using an FF-prefix is more appropriate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also move FF_CODEC_TAGS_END as well as struct AVCodecDefault.
This reduces the amount of files that have to include internal.h
(which comes with quite a lot of indirect inclusions), as e.g.
most encoders don't need it. It is furthemore in preparation
for moving the private part of AVCodec out of the public codec.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Most of user data unregistered SEIs are privated data which defined by user/
encoder. currently, the user data unregistered SEIs found in input are forwarded
as side-data to encoders directly, it'll cause the reencoded output including some
useless UDU SEIs.
I prefer to add one option to enable/disable it and default is off after I saw
the patch by Andreas Rheinhardt:
https://patchwork.ffmpeg.org/project/ffmpeg/patch/AM7PR03MB66607C2DB65E1AD49D975CF18F7B9@AM7PR03MB6660.eurprd03.prod.outlook.com/
How to test by cli:
ffmpeg -y -f lavfi -i testsrc -c:v libx264 -frames:v 1 a.ts
ffmpeg -y -i a.ts -c:v libx264 -udu_sei 1 b.ts
ffmpeg -y -i a.ts -c:v libx264 -udu_sei 0 c.ts
# check the user data unregistered SEIs, you'll see two UDU SEIs for b.ts.
# and mediainfo will show with wrong encoding setting info
ffmpeg -i b.ts -vf showinfo -f null -
ffmpeg -i c.ts -vf showinfo -f null -
This fixes tickets #9500 and #9557.
Reviewed-by: "zhilizhao(赵志立)" <quinkblack@foxmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Unlike libx264, libx265 does not handle the chroma format check
on its own side, so in order to not write out values which are
supposed to be ignored according to the specification, we limit
the writing out of chroma sample location to 4:2:0 only.
Unlike libx264, libx265 does not have a separate "unspecified"/"auto"
default for color range, so we do always have to specify it.
Thus, we are required to handle the RGB case on the libavcodec
side to enable the correct value to be written out in in case
of RGB content with unspecified color range being received.
In other words:
1. If the user has set color range specifically, follow that.
2. If the user has not set color range specifically, set full
range by default in case of RGB and YUVJ pixel formats.
MISB ST 0604 and ST 2101 require user data unregistered SEI messages
(precision timestamps and sensor identifiers) to be included. That
currently isn't supported for libx265. This patch adds support
for user data unregistered SEI messages in accordance with
ISO/IEC 23008-2:2020 Section D.2.7
The design is based on nvenc, with support finished up at
57de80673c
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Here the packet size is known before allocating the packet,
so that supporting user-supplied buffers is trivial.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Deprecated in 40cf1bbacc.
(The currently disabled filter vf_mcdeint and vf_uspp were users of
this field; they have not been changed, so that whoever wants to fix
them can see the state of these filters when they were disabled.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This cap is currently used to mark multithreading-capable codecs that
wrap external libraries with their own multithreading code. The name is
highly confusing for our API users, since libavcodec ALWAYS handles
thread_count=0 (see commit message in previous commit). Therefore rename
the cap and update its documentation to make its meaning clear.
The old name is kept deprecated until next+1 major bump.
AV_CODEC_CAP_AUTO_THREADS was originally added in b4d44a45f9 to mark
codecs that spawn threads internally and are able to select an optimal
threads count by themselves (all such codecs are wrappers around
external libraries). It is used by lavc generic code to check whether it
should handle thread_count=0 itself or pass the zero directly to the
codec implementation. Within this meaning, it is clearly supposed to be
an internal cap rather than a public one, since from the viewpoint of a
libavcodec user, lavc ALWAYS handles thread_count=0. Whether it happens
in the generic code or within the codec internals is not a meaningful
difference for the caller.
External aspects of this flag will be dealt with in the following
commit.
"HEVC HDR UHDTV Bitstreams using HLG10 shall also contain the
alternative_transfer_characteristics SEI message. The
alternative_transfer_characteristics SEI message shall be inserted on
the HEVC DVB_RAP, and preferred_transfer_characteristics shall be set
equal to "18", indicating Recommendation ITU-R BT. 2100 [45] HLG
system."
Signed-off-by: Zhong Li <zhongli_dev@126.com>
perfer avctx->framerate first than use avctx->time_base when setting
the frame rate to encoder. 1/time_base is not the average frame rate
if the frame rate is not constant, so use avctx->framerate if the
value is not zero.
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
CLI options -maxrate, -bufsize and -rc_init_occupancy can now be picked
up by the x265 wrapper. Min. rc init has to be 1001 to avoid x265
setting it to vbv-bufsize.
