This is possible now that the next-API is gone.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
open_url_keepalive() unsets the options when it uses them, this
includes the offsets for the Range: header. When using the HLS
tag #EXT-X-BYTERANGE along with multiple files, the range options
must be preserved after open_url_keepalive() returns EOF so that
the new file can be opened. Failure to do this results in ignoring
the #EXT-X-BYTERANGE tag and reading the wrong bytes of the file.
To fix it, reset the options before calling io_open() following
open_url_keepalive() reaching EOF
Reviewed-by: Steven Liu <liuqi05@kuaishou.com>
Fix atoi() overflow for large EXT-X-MEDIA-SEQUENCE.
The spec says the type of sequence number is uint64_t. Use int64_t
here since current implementation requires it to be signed integer,
and hlsenc use int64_t too.
During operation, the user exits and interrupts,
causing pls->segment to be released,
resulting in a null pointer crash
Signed-off-by: bevis <javashu2012@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Add AC-3/EAC-3 to allowed extensions file list.
From HTTP Live Streaming 2nd Edition draft-pantos-hls-rfc8216bis-07
section 3.1.3.Packed Audio, HLS demuxer need to support MP3/AC-3/EAC-3.
Reviewd-by: Steven Liu <liuqi05@kuaishou.com>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
open_url() in the DASH as well in the hls demuxer share a common bug:
They modify an AVDictionary (i.e. set a new entry) given to them as
AVDictionary *, yet if this new entry leads to reallocation and
relocation of the AVDictionary, the caller's pointer will become
dangling, leading to use-after-frees. So pass an AVDictionary **.
(With the current implementation of AVDictionary the above can only
happen if the AVDictionary was empty initially (in which case the
new AVDictionary leaks); furthermore if the I/O is ordinary (i.e. opened
by avio_open2() or ffio_open_whitelist()), the dict is never empty (it
contains an rw_timeout entry from save_avio_options()). So this issue
could only happen if the caller sets a nondefault io_open callback, but
no AVIOContext (the AVFMT_FLAG_CUSTOM_IO flag won't be set in this
case). In case of the HLS demuxer, it was also necessary that setting
the "seekable" entry failed. Yet one should simply not rely on internals
of the AVDict API.)
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
and remove reset_packet(). The packet's data pointer is already zeroed,
so the only thing that reset_packet() does that av_init_pkt() doesn't is
redundant.
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
av_read_frame() already returns blank packets on error.
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The segments / url can be modified by the io read when reloading
This may be an alternative or additional fix for Ticket8673
as a further alternative the reload stuff could be disabled during
probing
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
hls demuxer get the stream info from sub-stream, but missed side
data/disposition part, e,g, missed the DOVI side data when the
stream is Dolby Vision streams.
Reviewed-by <liuqi05@kuaishou.com>
Signed-off-by: vacingfang <vacingfang@tencent.com>
ff_id3v2_parse_apic/chapters/priv/priv_dict all had a parameter
extra_meta of type ID3v2ExtraMeta ** as if the functions wanted to make
*extra_meta point to something else. But they don't, so just use an
ID3v2ExtraMeta *.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the ID3v2ExtraMeta structure (which is used when parsing
ID3v2 tags containing attached pictures, chapters etc.) contained a
pointer to separately allocated data that depended on the type of the
tag. Yet the difference of the sizes of the largest and the smallest of
these structures is fairly small, so that it is better to simply include
a union of all the possible types of tag-dependent structures in
ID3v2ExtraMeta. This commit implements this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
ff_id3v2_free_extra_meta() takes a ID3V2ExtraMeta ** so that it can
already reset the pointer.
Reviewed-by: Jun Zhao <mypopy@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If an URI indicated that the data protocol was in use, it would be
copied into a temporary buffer via strncpy(dst, src, strlen(src)),
thereby ensuring that the trailing \0 would not be copied, despite dst
being uninitialized. dst would then be av_strdup'ed, leading to
potential segfaults.
The solution to this is simple: Don't copy the URI in the temporary
buffer at all, instead av_strdup it directly.
This fixes a -Wstringop-truncation warning emitted by GCC 9.2.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Since bae8844e the packet will always be unreferenced when a demuxer
returns an error, so that a lot of calls to av_packet_unref() in lots of
demuxers are now redundant and can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
When the user decides they do not want to to send the Icy-MetaData
header, this should be respected for all requests, not just the first
one.
Fix#5578
Reviewed-by: Liu Steven <lq@chinaffmpeg.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Add probesize/max_analyze_duration support when open the sub-demuxer,
it's will be used to minimizing the initial delay.
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
There have been many reports over the years about problems when
taking an HLS stream as input to `ffmpeg` where there are timestamp
discontinuities present. This is explicitly supported in the
HLS spec (EXT-X-DISCONTINUITY) and often used for ad injection.
Various fixes and work-arounds have been proposed over the years,
but one step that seems obvious, even if it's not a complete fix,
is to mark the HLS input format as supporting discontinuities. This
will prevent timestamp fixup logic in ffmpeg.c kicking in that ends
up mangling the timestamps unnecessarily.
I've tested this out with an example provided by Joe Koberg early
last year, and it is sufficient to allow `ffmpeg` to download and
mux the stream correctly. Joe had briefly suggested that other
situations can still be handled incorrectly, but this seems like
a strict improvement.
Joe's example:
https://s3.amazonaws.com/playon-test-videos/discont_test_new/discont_test.m3u8
Reviewed-by: Steven Liu <lq@onvideo.cn>
Reviewed-by: Dennis Mungai <dmngaie@gmail.com>
made with persistent connections to prevent incorrect reset of
offset when demuxing HLS+FMP4
Signed-off-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: vectronic <hello.vectronic@gmail.com>
ffio_init_context with NULL seek callback will setting seekable with 0, so
remove the redundancy seekable setting.
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
ff_format_io_close will check the AVIOContext pointer pb, so drop
the unnecessary check before ff_format_io_close.
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Add http_seekable option for HTTP partial requests, when The
EXT-X-BYTERANGE tag indicates that a Media Segment is a sub-range
of the resource identified by its URI, we can use HTTP partial
requests to get the Media Segment.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Replace the same code logic with ensure_playlist(), it's will
help reusable blocks of code.
Reviewed-by: Jun Zhao <barryjzhao@tencent.com>
Signed-off-by: vacingfang <vacingfang@tencent.com>
av_packet_unref have reseted the AVPacket, so don't need to call
reset_packet after that.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Pass correct pointer to av_log() and update some error/warning message,
it's will help the debugging
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
After the commit 9f61abc811, we can use AVFormatContext.strict_std_compliance
instead of HLSContext.strict_std_compliance to avoid the code redundancy.
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Cleanup the applehttp as demuxer name, when use the command :
ffmpeg -formats, get the confused information like:
"
E hls Apple HTTP Live Streaming
D hls,applehttp Apple HTTP Live Streaming
"
we don't use applehttp as the demuxer/muxer name usually, so
cleanup the applehttp and update the documents.
After the change, get the information from "ffmpeg -formats":
"
DE hls Apple HTTP Live Streaming
"
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
