Since ec0275843d this file
is compiled iff the IFF ILBM decoder is enabled.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
log2() remains, this can either be replaced by a integer implementation or the table
hardcoded if needed
Tested-by: Anton Khirnov <anton@khirnov.net>
Tested-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The dlopen wrapper contains code to make loading libraries safer,
to avoid loading a potentially malicious DLL with the same name.
Signed-off-by: Martin Storsjö <martin@martin.st>
This patch adds code to support specializations of the hscale function
and adds a specialization for filterSize == 4.
ff_hscale8to15_4_neon is a complete rewrite. Since the main bottleneck
here is loading the data from src, this data is loaded a whole block
ahead and stored back to the stack to be loaded again with ld4. This
arranges the data for most efficient use of the vector instructions and
removes the need for completion adds at the end. The number of
iterations of the C per iteration of the assembly is increased from 4 to
8, but because of the prefetching, there must be a special section
without prefetching when dstW < 16.
This improves speed on Graviton 2 (Neoverse N1) dramatically in the case
where previously fs=8 would have been required.
before: hscale_8_to_15__fs_8_dstW_512_neon: 1962.8
after : hscale_8_to_15__fs_4_dstW_512_neon: 1220.9
Signed-off-by: Jonathan Swinney <jswinney@amazon.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
When target levels are set, this patch checks whether they are
satisfied by libaom. If not, a warning is shown. Otherwise the output
levels are also logged.
This patch applies basically the same approach used for libvpx.
Signed-off-by: Bohan Li <bohanli@google.com>
Signed-off-by: James Zern <jzern@google.com>
This fixed the regression caused by commit 478e1a98a
Reported-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The code is only called if size is > 0 so buf should not be NULL
Helps: CID610554
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Noticed-and-suggested-by: Mark Gaiser <markg85@gmail.com>
Reviewed-by: Mark Gaiser <markg85@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The doc says those function are like av_free if size or nmemb is
zero. It doesn't match the code. av_realloc() realloc one byte if
size is zero, which was added by 91ff05f6ac ten years ago.
realloc() itself in C is implementation-dependent. Make the doc
match the longstanding behaviour.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Allows non-UWP builds of FFmpeg with MediaFoundation to work on
N editions of Windows which are without MediaFoundation by default.
On UWP target, FFmpeg is linked directly against MediaFoundation since
LoadLibrary is not available.
This commit adresses https://trac.ffmpeg.org/ticket/9788
Signed-off-by: Martin Storsjö <martin@martin.st>
libmfx 1.28 was released 3 years ago, it is easy to get a greater
version than 1.28. We may remove lots of compile-time checks if adding
the requirement for the minimal version in the configure script.
Reviewed-by: softworkz <softworkz@hotmail.com>
Signed-off-by: Jean-Baptiste Kempf <jb@videolan.org>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
vp9, hevc, avc, mpeg2 QSV encoders inherit common list
of options (QSV_COMMON_OPTS) while bunch of options is not
actually supported by current qsv code. The only codec which
supportes everything is avc, followed by hevc, while vp9 and
mpeg2 significantly fall behind. This creates difficulties
for the users to use qsv encoders. This patch fixes options
list for encoders leaving only those which are actually
supported.
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The HEVC decoder can call these functions with smaller widths than the
functions themselves are designed to operate on so we should only check
the relevant output
Signed-off-by: J. Dekker <jdek@itanimul.li>
The SAO band filter can be called with non-multiples of 8, we round up
to the nearest multiple of 8 to account for this.
Signed-off-by: J. Dekker <jdek@itanimul.li>
This commit removes the ineffective FF_MPV_DEPRECATED_ options,
namely mpeg_quant (this is only an option for MPEG-4), a53cc
(this is only an option for MPEG-2), force_duplicated_matrix
(applies only to MJPEG) and b_strategy, b_sensitivity and brd_scale
(these options only make sense for encoders supporting B-frames,
which currently means the MPEG-1/2 and MPEG-4 encoders).
Given that these options never changed the outcome of encoding,
they are removed at once.
Notice that the options for the encoders for which it made sense
are not affected by this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
(M)JPEG does not use motion estimation/motion vectors at all.
These options therefore don't affect the output at all.
So remove them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The user-provided value is overwritten in ff_mpv_encode_init()
without having ever been read.
(This has been broken when making these options mpegvideo-specific
in commits 910247f172 and
cf7d2f2d21. No one has ever complained,
so this commit removes these fields.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, ff_frame_thread_free() uses the last worker thread
to updates the first worker thread via update_context_from_thread()
immediately before freeing all these worker threads. This is
a remnant of the time in which the first worker was special.
(E.g. the first worker shared its AVCodecInternal with the public
AVCodecContext.)
But these times are over (none of the uses of is_copy matter
for ff_frame_thread_free()); nowadays the only thing that
update_context_from_thread() does is referencing a few
buffers/frames and replacing them with other references instead.
These new references will then be freed immediately thereafter
when the first worker thread is freed. Ensuring that the code is
free of double-frees is achieved by using reference-counted structures
(or in case of AVChannelLayouts: by giving each worker its own copy).
Some archaeology:
a) Updating the first worker thread from the last one used
has been done since frame-threading was added in
37b00b47cb.
b) The precursor to ff_mpv_common_end() checked for is_copy
before freeing pictures (i.e. it only freed them for the first
worker thread).
c) Commits c2dfb1e37c and
e33811bd26 modified the
update_thread_context function of the H.264 decoder
so that it could fail before calling ff_mpeg_update_thread_context().
d) This led to a double free/an assert violation with a H.264
sample for which ff_mpeg_update_thread_context() is not reached
for the final update_context_from_thread(). Commit
a6e4796fbf added code to fix this
sample.
e) This issue was fixed (even with the last mentioned commit reverted)
when the H.264 decoder was deMpegEncContextized in commit
b7fe35c9e5 (merging commit
2c54155407).
f) mpegvideo.c stopped using is_copy when it was switched to refcounted
frames in 759001c534.
g) 1f4cf92cfb removed the init_thread_copy
callbacks; now no FFCodec.close callback checks for is_copy at all
any more.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, $(CPPFLAGS) and $(CFLAGS) are prepended to CXXFLAGS
(the flags for compiling C++) like this:
CXXFLAGS := $(CPPFLAGS) $(CFLAGS) $(CXXFLAGS)
Using ":=" creates a simply expanded variable, i.e. the values
of the variable at the time of assignment are used and later
modifications to them are ignored (using a recursively expanding
variable (i.e. "=" instead of ":=") is not really possible here,
as there would be an infinite loop when evaluating CXXFLAGS).
Yet we perform later additions to CPPFLAGS: HAVE_AV_CONFIG_H and
BUILDING_libfoo are defined. These do not reach C++ compilations.
To fix this a trick is employed to prepend to a recursively
expanded variable while keeping it recursively expanded.
There are two practical consequences of this: C++ files now no longer
include the version.h header, but only the version_major.h header
of their library, saving some recompilations. Furthermore, they
now get some optimized math functions (namely the ones from
lavu/intmath.h instead of the ones from lavu/common.h).
(av_parity() is the only one for which it makes a difference.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is a more appropriate place for this code, since the values we read
from AV_PKT_DATA_QUALITY_STATS side data are primarily written into
video stats. This ensures that the values written into stats actually
apply to the right packet.
Rename the function to update_video_stats() to better reflect its new
purpose.
It retrieves libavformat's internal dts value (contrary to the
function's name), which is not only incorrect in general, but also
unnecessary because we can access the packet directly.
Its use for muxing is not documented, in practice it is incremented per
each packet successfully passed to the muxer's write_packet(). Since
there is a lot of indirection between ffmpeg receiving a packet from the
encoder and it actually being written (e.g. bitstream filters, the
interleaving queue), using nb_frames here is incorrect.
Add a new counter for packets received from encoder instead.
The top/bottom of the barrel are each coded as two semicircles inside a
square block in the frame. Mask out the parts of the square that lie
outside of these semicircles, so they are made transparent when
alpha_mask=1.
Fixes the other part of #9725.
