Before 998c9f15d1, initializing an
MpegEncContext's IDCT parts occured in ff_mpv_common_init() and this
has been called in h261_decode_frame(), not h261_decode_init().
Yet said commit factored this out of ff_mpv_common_init() and therefore
there is no reason any more not to set this during init as this commit
does.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The RealVideo 3.0 and 4.0 decoders call ff_mpv_common_init() only during
their init function and not during decode_frame(); when the size of the
frame changes, they call ff_mpv_common_frame_size_change(). Yet upon
error, said function calls ff_mpv_common_end() which frees the whole
MpegEncContext and not only those parts that
ff_mpv_common_frame_size_change() reinits. As a result, the context will
never be usable again; worse, because decode_frame() contains no check
for whether the context is initialized or not, it is presumed that it is
initialized, leading to segfaults. Basically the same happens if
rv34_decoder_realloc() fails.
This commit fixes this by only resetting the parts that
ff_mpv_common_frame_size_change() changes upon error and by actually
checking whether the context is in need of reinitialization in
ff_rv34_decode_frame().
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In case of resolution changes rv20_decode_picture_header() closes and
reopens its MpegEncContext; it checks the latter for errors, yet when
an error happens, it might happen that no new attempt at
reinitialization is performed when decoding the next frame; this leads
to crashes lateron.
This commit fixes this by making sure that initialization will always
be attempted if the context is currently not initialized.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When slice-threading is used, ff_mpv_common_init() duplicates
the first MpegEncContext and allocates some buffers for each
MpegEncContext (the first as well as the copies). But the count of
allocated MpegEncContexts is not updated until after everything has
been allocated and if an error happens after the first one has been
allocated, only the first one is freed; the others leak.
This commit fixes this: The count is now set before the copies are
allocated. Furthermore, the copies are now created and initialized
before the first MpegEncContext, so that the buffers exclusively owned
by each MpegEncContext are still NULL in the src MpegEncContext so
that no double-free happens upon allocation failure.
Given that this effectively touches every line of the init code,
it has also been factored out in a function of its own in order to
remove code duplication with the same code in
ff_mpv_common_frame_size_change() (which was never called when using
more than one slice (and if it were, there would be potential
double-frees)).
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This mostly reverts commit 4b2863ff01.
Said commit removed the freeing code from ff_mpv_common_init(),
ff_mpv_common_frame_size_change() and ff_mpeg_framesize_alloc() and
instead added the FF_CODEC_CAP_INIT_CLEANUP to several codecs that use
ff_mpv_common_init(). This introduced several bugs:
a) Several decoders using ff_mpv_common_init() in their init function were
forgotten: This affected FLV, Intel H.263, RealVideo 3.0 and V4.0 as well as
VC-1/WMV3.
b) ff_mpv_common_init() is not only called from the init function of
codecs, it is also called from AVCodec.decode functions. If an error
happens after an allocation has succeeded, it can lead to memleaks;
furthermore, it is now possible for the MpegEncContext to be marked as
initialized even when ff_mpv_common_init() returns an error and this can
lead to segfaults because decoders that call ff_mpv_common_init() when
decoding a frame can mistakenly think that the MpegEncContext has been
properly initialized. This can e.g. happen with H.261 or MPEG-4.
c) Removing code for freeing from ff_mpeg_framesize_alloc() (which can't
be called from any init function) can lead to segfaults because the
check for whether it needs to allocate consists of checking whether the
first of the buffers allocated there has been allocated. This part has
already been fixed in 76cea1d2ce.
d) ff_mpv_common_frame_size_change() can also not be reached from any
AVCodec.init function; yet the changes can e.g. lead to segfaults with
decoders using ff_h263_decode_frame() upon allocation failure, because
the MpegEncContext will upon return be flagged as both initialized and
not in need of reinitialization (granted, the fact that
ff_h263_decode_frame() clears context_reinit before the context has been
reinited is a bug in itself). With the earlier version, the context
would be cleaned upon failure and it would be attempted to initialize
the context again in the next call to ff_h263_decode_frame().
While a) could be fixed by adding the missing FF_CODEC_CAP_INIT_CLEANUP,
keeping the current approach would entail adding cleanup code to several
other places because of b). Therefore ff_mpv_common_init() is again made
to clean up after itself; the changes to the wmv2 decoder and the SVQ1
encoder have not been reverted: The former fixed a memleak, the latter
allowed to remove cleanup code.
Fixes: double free
Fixes: ff_free_picture_tables.mp4
Fixes: ff_mpeg_update_thread_context.mp4
Fixes: decode_colskip.mp4
Fixes: memset.mp4
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
All codec ids on BSF whitelists have a codec descriptor, so one can just
use avcodec_get_name() without worrying about the case of what happens
when no codec descriptor is found.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
av_frame_copy() is allowed to return values >= 0 on success, whereas
the documentation of av_frame_ref() states that the return value is 0 on
success. Ergo the latter must not just return the former's return value.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
All one needs is one byte beyond the end of the normal data; and because
the packet is padded, one already has it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes the following GCC warning:
warning: format ‘%lld’ expects argument of type ‘long long int’,
but argument 4 has type ‘int64_t’ {aka ‘long int’} [-Wformat=]
Reviewed-by: Gyan Doshi <ffmpeg@gyani.pro>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This fixes building with MSVC after
a2a38b1606.
Remove the stray semicolon, and add casts for the input argument
(which is an intptr_t*) to the right type (PVOID volatile *).
Signed-off-by: Martin Storsjö <martin@martin.st>
If only one of the two arrays used for the ICC profile could be
successfully allocated, it might be overwritten and leak when
the next ICC entry is encountered. Fix this by using a common struct,
so that one has only one array to allocate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids use of uninitialized data
also several checks are inside the band reading code
so it is important that it is run at least once
Fixes: out of array accesses
Fixes: 28209/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_CFHD_fuzzer-5684714694377472
Fixes: 32124/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_CFHD_fuzzer-5425980681355264
Fixes: 30519/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_CFHD_fuzzer-4558757155700736
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Previously the code skipped all security checks when these where encountered but prior data was incorrect.
Also replace an always true condition by an assert
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array accesses
Fixes: 29754/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_CFHD_fuzzer-6333598414274560
Fixes: 30519/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_CFHD_fuzzer-6298424511168512
Fixes: 30739/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_CFHD_fuzzer-5011292836462592
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When using external Huffman tables fails during init, the decoder
reverts back to using the default Huffman tables; and when doing so,
the current VLC tables leak because init_default_huffman_tables()
doesn't free them before overwriting them.
Sample:
samples.ffmpeg.org/archive/all/avi+mjpeg+pcm_s16le++mjpeg-interlace.avi
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
render_charset() used static buffers that are always completely
initialized before every use, so that it is unnecessary for the
values in these arrays to be kept after leaving the function.
Given that this is not only unnecessary, but harmful due to the
possibility of data races if several instances of a64multi/a64multi5
run simultaneously these buffers have been replaced by ordinary buffers
on the stack (they are small enough for this).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The current code tries the access the codecpar of a nonexistent
audio stream when seeking. Stop that. Fixes ticket #9121.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
av_cpu_count() intends to emit a debug message containing the number of
logical cores when called the first time. The check currently works with
a static volatile int; yet this does not help at all in case of
concurrent accesses by multiple threads. So replace this with an
atomic_int.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
A buffer may leak in case of YUVA444P10 with dimensions that are not
both divisible by 16.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When allocating a BSF fails, it could happen that the BSF's close
function has been called despite a failure to allocate the private data.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes a crash with ISOBMFF extradata containing no OBUs.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is a regression since switching to the generic CBS BSF code.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also don't unnecessarily copy the input data around if it needn't be
reversed; and remove a redundant memset -- av_fast_padded_malloc()
already does this for us.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The DSS demuxer currently decrements a counter that should be positive
at the beginning of read_packet; should it become negative, it means
that the data to be read can't be read contiguosly, but has to be read
in two parts. In this case the counter is incremented again after the
first read if said read succeeded; if not, the counter stays negative.
This can lead to problems in further read_packet calls; in tickets #9020
and #9023 it led to segfaults if one tries to seek lateron if the seek
failed and generic seek tried to read from the beginning. But it could
also happen when av_new_packet() failed and the user attempted to read
again afterwards.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When encoding E-AC-3, whether coupling is on or not determines whether
an additional frame based coupling exponent strategy element frmcplexpstr
(of size five bits) is present in the bitstream. So just add five to the
number of bits when counting them instead of adding 5*s->cpl_on (the
latter field is currently only 0 or 1, so it doesn't make a difference).
Furthermore, move some parts of the bit allocation that doesn't change
per-frame to count_frame_bits_fixed() (which is only run once during
init).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
