Also make the iso_channel_position table consistent with what the AAC decoder
uses in avcodec/aac/aacdec_usac.c.
Fate changes are caused by the change of how 7.1 layout is mapped, previously
it included Side Surround channels, now it includes the Surround channels.
Signed-off-by: Marton Balint <cus@passwd.hu>
On the top of p. 112 in VVC (09/2023):
It is a requirement of bitstream conformance that the values of
qpInVal[ i ][ j ] and qpOutVal[ i ][ j ] shall be in the range
of −QpBdOffset to 63, inclusive for i in the range of 0 to
numQpTables − 1, inclusive, and j in the range of 0 to
sps_num_points_in_qp_table_minus1[ i ] + 1, inclusive.
Additionally, don't discard the return code from sps_chroma_qp_table.
Signed-off-by: Frank Plowman <post@frankplowman.com>
Besides being write only it had the wrong type:
An uint8_t is definitely not enough to store the size
of these buffers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It has been added in 3a87ac948f,
but there was never an implementation different from the ordinary
dct_quantize of it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Use the common approach whereby the _c versions are set first
and then (potentially) overwritten by the arch-specific ones
instead of calling the arch-specific code first, followed by
setting the function pointers that have not already been set.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The C version is set in ff_dct_encode_init(), yet the MIPS version
is set in dct_init() (in ff_mpv_common_init() and therefore also
for decoders). This commit fixes this inconsistency.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The H.264 decoder used reference to store its picture_structure
into it; yet it does not use mpegvideo any more since commit
2c54155407. Afterwards commit
629259bdb5 removed the last remnants.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It has been added in a579db0c4f
due to XvMC, but today it is only used to swap U and V
for VCR2, a MPEG-2 variant with U and V swapped.
This can be done in a simpler fashion, namely by simply
swapping the U and V pointers of the corresponding
MPVWorkPictures.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
MPEG-1/2 only needs one scantable and therefore all code
already uses the intra one. So stop initializing
the inter one altogether.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The days in which an MPVPicture* is set with the corresponding frame
being blank are over; this allows to simplify some checks.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This also rids us of the requirement to preserve the PutBitContext
in ff_update_duplicate_context().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Only set the ScratchpadContext and let the users that need it
(i.e. encoders) set the MotionEstContext stuff themselves.
Also add an explicit pointer to ScratchpadContext to point
to the allocated buffer so that none of the other scratchpad
pointers is singled out as being used for the allocations.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These pointers point to the same buffers, so one can just
use a union for them and avoid synchronising one of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Given that MPVPictures are already directly shared between threads
in case of frame-threaded decoding, one can simply use it to
pass decoding progress information between threads. This allows
to avoid one level of indirection; it also means avoids allocations
(of the ThreadFrameProgress structure) in case of frame-threading
and indeed makes ff_thread_release_ext_buffer() decoder-only
(actually, H.264-decoder-only).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, an initialized MpegEncContext had an array of
MPVPictures (way more than were ever needed) and the MPVPicture*
contained in the MPVWorkPictures as well as the input_picture
and reordered_input_picture arrays (for the encoder) pointed
into this array. Several of the pointers could point to the
same slot and because there was no reference counting involved,
one had to check for aliasing before unreferencing.
Furthermore, given that these pointers were not ownership pointers
the pointers were often simply reset without unreferencing
the slot (happened e.g. for the RV30 and RV40 decoders) or
there were moved without resetting the src pointer (happened
for the encoders where the entries in the input_picture
and reordered_input_picture arrays were not reset).
Instead actually releasing these pictures was performed by looping
over the whole array and checking which one of the entries needed
to be kept. Given that the array had way too many slots (36),
this meant that more than 30 MPVPictures have been unnecessarily
unreferenced in every ff_mpv_frame_start(); something similar
happened for the encoder.
This commit changes this by making the MPVPictures refcounted
via the RefStruct API. The MPVPictures itself are part of a pool
so that this does not entail constant allocations; instead,
the amount of allocations actually goes down, because the
earlier code used such a large array of MPVPictures (36 entries) and
allocated an AVFrame for every one of these on every
ff_mpv_common_init(). In fact, the pool is only freed when closing
the codec, so that reinitializations don't lead to new allocations
(this avoids having to sync the pool in update_thread_context).
Making MPVPictures refcounted also has another key benefit:
It makes it possible to directly share them across threads
(when using frame-threaded decoding), eliminating ugly code
with underlying av_frame_ref()'s; sharing these pictures
can't fail any more.
The pool is allocated in ff_mpv_decode_init() for decoders,
which therefore can fail now. This and the fact that the pool
is not unreferenced in ff_mpv_common_end() also necessitated
to mark several mpegvideo-decoders with the FF_CODEC_CAP_INIT_CLEANUP
flag.
*: This also means that there is no good reason any more for
ff_mpv_common_frame_size_change() to exist.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently identical to the H.261 and H.263 close functions
(which it replaces). It will be extended in future commits.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This brings it in line with mpeg12dec.c.
(This entry has been added before the MPEG2VIDEO codec id
existed.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is all that is used. This is in preparation for further
commits that will extend ff_mpv_decode_init() in a way
that will make it possible to fail and require cleanup.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It already avoids a goto and will be useful in the future
to be able to specify each functions tasks and obligations.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are two types of MPVPictures: Three (cur_pic, last_pic, next_pic)
that are directly part of MpegEncContext and an array of MPVPictures
that are separately allocated and are mostly accessed via pointers
(cur|last|next)_pic_ptr; they are also used to store AVFrames in the
encoder (necessary due to B-frames). As the name implies, each of the
former is directly associated with one of the _ptr pointers:
They actually share the same underlying buffers, but the ones
that are part of the context can have their data pointers offset
and their linesize doubled for field pictures.
Up until now, each of these had their own references; in particular,
there was an underlying av_frame_ref() to sync cur_pic and cur_pic_ptr
etc. This is wasteful.
This commit changes this relationship: cur_pic, last_pic and next_pic
now become MPVWorkPictures; this structure does not have an AVFrame
at all any more, but only the cached values of data and linesize.
It also contains a pointer to the corresponding MPVPicture, establishing
a more natural relationsship between the two.
This already means that creating the context-pictures from the pointers
can no longer fail.
What has not been changed is the fact that the MPVPicture* pointers
are not ownership pointers and that the MPVPictures are part of an
array of MPVPictures that is owned by a single AVCodecContext.
Doing so will be done in a latter commit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This way said function sets everything (except for the actual
contents of the frame's data). Also rename it to prepare_picture()
given its new role.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
