Move section to the top of the file, use table in place of subsection
to list the comprising muxers, and show media type information and
extensions in the item entry names.
To allow adding proper negotiation, in particular, to fftools.
These values will simply be negotiated downstream for YUV formats, and
ignored otherwise.
Motivated by YUVJ removal. This change will allow full negotiation
between color ranges and matrices as needed. By default, all ranges and
matrices are marked as supported.
Because grayscale formats are currently handled very inconsistently (and
in particular, assumed as forced full-range by swscale), we exclude them
from negotiation altogether for the time being, to get this API merged.
After filter negotiation is available, we can relax the
grayscale-is-forced-jpeg restriction again, when it will be more
feasible to do so without breaking a million test cases.
Note that this commit updates one FATE test as a consequence of the
sanity fallback for non-YUV formats. In particular, the test case now
writes rgb24(pc, gbr/unspecified/unspecified) to the matroska file,
instead of rgb24(unspecified/unspecified/unspecified) as before.
Some encoders (e.g., libx264) dump encoder configuration as user
data unregistered SEI message. This option try to print it as
ascii character when possible.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
This can be used to run tests multple times, with e.g. differing
QEMU settings, by adding something like this to the FATE configuration
file:
target_exec="qemu-aarch64-static"
fate_targets="fate-checkasm fate-cpu"
fate_environments="sve128 sve256 sve512"
sve128_env="QEMU_CPU=max,sve128=on"
sve256_env="QEMU_CPU=max,sve256=on"
sve512_env="QEMU_CPU=max,sve512=on"
It's also possible to customize the target_exec command further
by injecting a sufficiently quoted variable into it, which then can
be updated for each run, e.g. target_exec="\$(CUR_EXEC_CMD)".
For each of the environment names in fate_environments, the tests
that are run get the name suffixed on the fate tests in the
test log and fate report, e.g. "fate-checkasm-h264dsp_sve128".
Signed-off-by: Martin Storsjö <martin@martin.st>
This can be useful if doing testing of uncommon CPU extensions by
running tests with QEMU (by configuring with e.g.
"target_exec=qemu-aarch64"), by only running the checkasm tests,
to get a reasonable test coverage without excessive test runtime.
For such a config, setting fate_targets="fate-checkasm fate-cpu"
can be a good tradeoff.
Signed-off-by: Martin Storsjö <martin@martin.st>
The {br}/{abr} directives are not limited to post-encoding, they can
also be used pre-muxing. The already-present {packet} tag describes this
more accurately, so just drop the assertions.
x11grab can capture windows by their ID, but gdigrab can only capture
windows by their names, internally calling FindWindowW to lookup its
handle.
This patch simply allows the user to specify a window handle directly.
Signed-off-by: Lena <lena@nihil.gay>
3d29724c00 removed the doc entry for the option pool while adding
a parser function for it at the same time!
The option remains available and undeprecated.
Fixes trac #10693
Texinfo 7.0 produces quite different HTML to Texinfo 6.8. Without
this change, enumerated option flags (i.e. Possible values of x
are...) render as white text on a white background with Texinfo 7.0
and are unreadable. This change removes a style for the selector
`.table .table` which causes the background to turn white for these
elements. As far as I can tell, it is not actually used anywhere in
files generated by Texinfo 6.8.
Signed-off-by: Frank Plowman <post@frankplowman.com>
Resolves trac ticket #10636 (http://trac.ffmpeg.org/ticket/10636).
Texinfo 7.0, released in November 2022, changed the names of various
functions. Compiling docs with Texinfo 7.0 resulted in warnings and
improperly formatted documentation. More old names appear to have
been removed in Texinfo 7.1, released October 2023, which causes docs
compilation to fail.
This commit addresses the issue by adding logic to switch between the old
and new function names depending on the Texinfo version. Texinfo 6.8
produces identical documentation before and after the patch.
CC
https://www.mail-archive.com/debian-bugs-dist@lists.debian.org/msg1938238.htmlhttps://bugs.gentoo.org/916104
Signed-off-by: Frank Plowman <post@frankplowman.com>
By intent, and in practice, the "active contributor" criterion applies
to the person authoring the commits, not the one pushing them into the
repository.
Partially fixes ticket #798
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Peter Ross <pross@xvid.org>
The `-caption_encoding` option was reported as having a default value of
'ass', whereas it's actually 'auto'.
Signed-off-by: zheng qian <xqq@xqq.im>
Signed-off-by: Gyan Doshi <ffmpeg@gyani.pro>
There are already several places in the codebase that match desc->name
against "xyz", and many downstream clients replicate this behavior.
I have no idea why this is not just a flag.
Motivated by my desire to add yet another check for XYZ to the codebase,
and I'd rather not keep copy/pasting a string comparison hack.
This should hopefully clarify that the option only affects MSZ
full-width characters, and not all full-width ASCII. Additionally,
this matches the prefix with the upstream option.
Signed-off-by: TADANO Tokumei <aimingoff@pc.nifty.jp>
This patch adds two MSZ (Middle Size; half width) character
related options, mapping against newly added upstream
functionality:
* `replace_msz_japanese`, which was introduced in version 1.0.1
of libaribcaption.
* `replace_msz_glyph`, which was introduced in version 1.1.0
of libaribcaption.
The latter option improves bitmap type rendering if specified
fonts contain half-width glyphs (e.g., BIZ UDGothic), even
if both ASCII and Japanese MSZ replacement options are set
to false.
As these options require newer versions of libaribcaption, the
configure requirement has been bumped accordingly.
Signed-off-by: TADANO Tokumei <aimingoff@pc.nifty.jp>
Mapping to ITU-R BS.2051-3 "Sound System J" and ITU-R BS.1196-8 "Channel
Configuration 19".
Signed-off-by: Will Wolcott <wwolcott@netflix.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This layout maps to ITU-R BS.2051-3 "Sound System C" and ITU-R BS.1196-8 "Channel
Configuration 14", and it being the first layout with top layer channels, it's
best to use a different scheme to properly convey the presence and amount of said
channels.
The new name will also be a better fit for the additions in the following commits.
Signed-off-by: James Almer <jamrial@gmail.com>
The vidstab library added support in Nov 2020 for writing/reading
the transforms data in binary in addition to ASCII. The library default
was changed to binary format but no changes were made to the AVfilters
resulting in data file for writing or reading being always opened as text.
This effectively broke the filters.
Option added to vidstabdetect to specify file format and open files in
both filters with the correct attributes.
It is unnecessary since the removal of non-thread-safe callbacks
in e0786a8eeb. Since then, the
AVCodecContext has only been used as logcontext.
Removing ff_thread_release_buffer() allowed to remove AVCodecContext*
parameters from several other functions (not only unref functions,
but also e.g. ff_h264_ref_picture() which calls ff_h264_unref_picture()
on error).
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fix rendering of int values within a side data element, which was
broken since commit d2d3a83ad9, where the side data element was
correctly marked as a variable fields element. Logic to render a
string variable was implemented already, but it was not implemented
for the int fields path, which was enabled by that commit.
Also, code and schema is changed in order to account for multiple
variable-fields elements - such as side data, contained within the
same parent. Previously it was assumed that a single variable-fields
element was contained within the parent, which was the case for tags,
but is not the case for side-data.
Previously data was rendered as:
<side_data_list>
<side_data side_data_type="CPB properties" max_bitrate="0" min_bitrate="0" avg_bitrate="0" buffer_size="327680" vbv_delay="-1"/>
</side_data_list>
Now as:
<side_data_list>
<side_data type="CPB properties">
<side_datum key="side_data_type" value="CPB properties"/>
<side_datum key="max_bitrate" value="0"/>
<side_datum key="min_bitrate" value="0"/>
<side_datum key="avg_bitrate" value="0"/>
<side_datum key="buffer_size" value="49152"/>
<side_datum key="vbv_delay" value="-1"/>
</side_data>
</side_data_list>
Variable-fields elements are rendered as a containing element wrapping
generic key/values elements, enabling use of strict XML schema.
Fix trac issue:
https://trac.ffmpeg.org/ticket/10613
Always use the functionality of the latter, which makes more sense as it
avoids losing keyframes due to vsync code dropping frames.
Deprecate the 'source_no_drop' value, as it is now redundant.
Deprecate AVStream.side_data and its helpers in favor of the AVStream's
codecpar.coded_side_data.
This will considerably simplify the propagation of global side data to decoders
and from encoders. Instead of having to do it inside packets, it will be
available during init().
Global and frame specific side data will therefore be distinct.
Signed-off-by: James Almer <jamrial@gmail.com>
This will simplify the propagation of side data to decoders and from encoders.
Global side data will now reside in the AVCodecContext, thus be available
during init(), removing the need to propagate it inside packets.
Global and frame specific side data will therefore be distinct.
Signed-off-by: James Almer <jamrial@gmail.com>
Handling AVPacketSideData directly, which can used on structs other than
AVPacket.
This will be useful in the following commits.
Signed-off-by: James Almer <jamrial@gmail.com>
Drop reference to constants removed in 94eed68ace.
In particular, rename me_method to me_quality and add description for
supported values.
Address trac issue:
http://trac.ffmpeg.org/ticket/10003
In particular, clarify that it can either be set as a field of
AVCodecContext or as an x264 option, using a different specification.
Should address trac issue:
http://trac.ffmpeg.org/ticket/3947
It dates back to pre-2005 days, when people generally tended to commit
their work directly without going through the mailing list. Few
developers do it today, and never outside of their standalone modules.
This item is thus confusing and misleading and is better removed.
The section consistes of a single short paragraph linking to other
chapters. The enclosing chapter also has no other sections, all other
text is placed in the chapter directly.
Keeping a separate section for this paragraph just adds more clutter.
It is also used by AVCodecContext.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is of no value to the user, because every muxer can always
be flushed with a NULL packet. As its documentation shows
("If not set, the muxer will not receive a NULL packet in
the write_packet function") it is actually an internal flag
that has been publically exposed because there was no internal
flags field for output formats for a long time. But now there is
and so use it by replacing the public flag with a private one.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They were replaced by TX from libavutil; the tremendous work
to get to this point (both creating TX as well as porting
the users of the components removed in this commit) was
completely performed by Lynne alone.
Removing the subsystems from configure may break some command lines,
because the --disable-fft etc. options are no longer recognized.
Co-authored-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ISO C++ forbids compound-literals. It's not available with MSVC.
This is a known issue from 10 years ago, and that's why there is a
av_get_time_base_q().
Since we have no plan to remove AV_TIME_BASE_Q, just make it
available in C++.
There are multiple choices:
1. Use C++11 syntax: AVRational{1, AV_TIME_BASE}
Users may still use C++98 to write new code. So no.
2. Use av_get_time_base_q().
It's for this purpose. But it's not compile time constants as
AV_TIME_BASE_Q in C.
So I choose av_make_q() as Anton's suggestion.
https://libav-devel.libav.narkive.com/ZQCWfTun/patch-0-2-fix-avutil-h-usage-from-c
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
It is badly named (should have been -top_field_first, or at least -tff),
underdocumented and underspecified, and (most importantly) entirely
redundant with the setfield filter.
It was added in cb114ed464 with the comment
"This will allow fixing several bugs with the -shortest option".
Since
* there is no explanation of what these bugs are
* libavformat is not the place to work around ffmpeg CLI bugs
* there is no indication that this feature is actually in use
deprecate it without replacement.
For badly interleaved files, interleave packets from multiple tracks
at the demuxer level can trigger seeking back and forth, which can be
dramatically slow depending on the protocol. Demuxer level interleave
can be useless sometimes, e.g., reading mp4 via http and then
transcoding/remux to DASH. Disable this option when you don't need the
demuxer level interleave, and want to avoid the IO penalizes.
Co-authored-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
av_image_copy() accepts const uint8_t* const * as source;
lots of user have uint8_t* const * and therefore either
cast (the majority) or copy the array of pointers.
This commit changes this by adding a static inline wrapper
for av_image_copy() that casts between the two types
so that we do not need to add casts everywhere else.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also constify AVAudioFifo* in the peek functions
besides constifying intermediate pointers (void**->void * const *).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is done immediately without waiting for the next major bump
just as in 9546b3a1cb and
4eaaa38d3d.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They are currently non-const for reasons unknown, although
avio_write() accepts a const buffer.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These defines are also used in other contexts than just AVCodecContext
ones, e.g. in libavformat. Furthermore, given that these defines are
public, the AV-prefix is the right one, so deprecate (and not just move)
the FF-macros.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This reverts commit eb88ccb92e.
AVCodecContext fields are the proper place for a decoder to export such values.
This change is in preparation for the following commits.
add option named rtmp_enhanced_codec,
it would support hvc1,av01,vp09 now,
the fourcc is using Array of strings.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
These are in-place transforms, required for DCT-I and DST-I.
Templated as the mod2 variant requires minor modifications, and is
required specifically for DCT-I/DST-I.
Can be used to configure libplacebo's underlying raw options, which
sometimes includes new or advanced / in-depth settings not (yet) exposed
by vf_libplacebo.
C++ doesn't support designated initializers until C++20. We have
a bunch of pre-defined channel layouts, the gains to make them
usable in C++ exceed the losses.
Bump minor version so C++ project can check before use these defines.
Also initialize .opaque field explicitly to reduce warning in C++.
Signed-off-by: James Almer <jamrial@gmail.com>
The commits eac4324bfb and
cd8211527e renamed the examples, but the
targets were not updated. Hence, the builds are missing -lm.
Signed-off-by: Sebastian Ramacher <sramacher@debian.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Stop claiming the argument is always a floating point number, which
* confuses floating point and decimal numbers
* is not always true even accounting for the above point
Read the timebase from FrameData rather than the input stream. This
should fix#10393 and generally be more reliable.
Replace the use of '-1' to indicate demuxing timebase with the string
'demux'. Also allow to request filter timebase with
'-enc_time_base filter'.
This decoding flag makes decoders drop all frames after a parameter
change, but what exactly constitutes a parameter change is not well
defined and will typically depend on the exact use case.
This functionality then does not belong in libavcodec, but rather in
user code
Useful for discovering bugs that depend on a specific thread count.
Use like THREADS=randomX for a random thread count from 1 to X, with
X=16 when not specified. Note that the thread count is different for
every test.
Uses the existing code for av_get_random_seed() to return a buffer with
cryptographically secure random data, or an error if none could be generated.
Signed-off-by: James Almer <jamrial@gmail.com>
Support decoding and embedding VANC packets delivered via SMPTE 2038
into the SDI output. We leverage an intermediate queue because
data packets are announced separately from video but we need to embed
the data into the video frame when it is output.
Note that this patch has some additional abstraction for data
streams in general as opposed to just SMPTE 2038 packets. This is
because subsequent patches will introduce support for other
data codecs.
Thanks to Marton Balint for review/feedback.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
- text is now shaped using libharfbuz
- glyphs position is now accurate to 1/4 pixel in both directions
- the default line height is now the one defined in the font
Adds libharfbuzz dependency.
I've been sitting on this for 3 1/2 years now(!), and I finally got
around to fixing the loose ends and convincing myself that it was
correct. It follows the same basic structure as yadif_cuda, including
leaving out the edge handling, to avoid expensive branching.
The contents of this field are not defined for decoding. Use
pkt_timebase, which is the timebase of demuxed packets.
Drop a tautological av_packet_rescale_ts() call, as the stream and
decoder timebases are the same.
Added prerequisites that must be met before providing support for the MPEG-5 EVC codec
- Added new entry to codec IDs list
- Added new entry to the codec descriptor list
- Bumped libavcodec minor version
- Added profiles for EVC codec
Signed-off-by: Dawid Kozinski <d.kozinski@samsung.com>
Signed-off-by: James Almer <jamrial@gmail.com>
0th order modified bessel function of the first kind are used in multiple
places, lets avoid having 3+ different implementations
I picked this one as its accurate and quite fast, it can be replaced if
a better one is found
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This algorithm has once again been refactored, this time leading to a
dropping of the old `tone_mapping_mode` field, to be replaced by a
single tunable hybrid mode with configurable strength.
We can approximately map the old modes onto the new API for backwards
compatibility. Replace deprecated enums by their integer equivalents to
safely preserve this API until the next bump.
Upstream deprecated the old ad-hoc, enum/intent-based gamut mapping API
and added a new API based on colorimetrically accurate gamut mapping
functions.
The relevant change for us is the addition of several new modes, as well
as deprecation of the old options. Update the documentation accordingly.
Not only this is information that relies on the concept of a sequence of
frames, which is completely out of place as a field in AVFrame, but there are
no known or intended uses of this field.
Signed-off-by: James Almer <jamrial@gmail.com>
For encoding, this field is entirely redundant with
AVCodecContext.framerate.
For decoding, this field is entirely redundant with
AV_CODEC_PROP_FIELDS.
This exposes libplacebo's frame mixing functionality to vf_libplacebo,
by allowing users to specify a desired target fps to output at. Incoming
frames will be smoothly resampled (in a manner determined by the
`frame_mixer` option, to be added in the next commit).
To generate a consistently timed output stream, we directly use the
desired framerate as the timebase, and simply output frames in
sequential order (tracked by the number of frames output so far).
THis filter can correct certain issues seen from upstream sources
where the cc_count is not properly set or the CEA-608 tuples are
not at the start of the payload as expected.
Make use of the ccfifo to extract and immediately repack the CEA-708
side data, thereby removing any extra padding and ensuring the 608
tuples are at the front of the payload.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Commit 55b81528a9 ("doc/filters: itemize crop examples") dropped the
quotation marks from these examples, but this one remained. Quotes are
actually needed to put the example into a command line or a program, but
removing it here makes the example consistent with the document.
Motivated by a desire to use vf_libplacebo as a GPU-accelerated
cropping/padding/zooming filter. This commit adds support for setting
the `input/target.crop` fields as dynamic expressions.
Re-use the same generic variables available to other scale and crop type
filters, and also add some more that we can afford as a result of being
able to set these properties dynamically.
It's worth pointing out that `out_t/ot` is currently redundant with
`in_t/t` since it will always contain the same PTS values, but I plan on
changing this in the near future.
I decided to also expose `crop_w/crop_h` and `pos_w/pos_h` as variables
in the expression parser itself, since this enables the fairly common
use case of determining dimensions first and then placing the image
appropriately, such as is done in the default behavior (which centers
the cropped/placed region by default).
In some circumstances, libplacebo will clear the background as a result
of cropping/padding. Currently, this uses the hard-coded default fill
color of black. This option makes this behavior configurable.
