Seeking to a negative time did not have the desired effect of seeking to
the next valid position (the file start). On the other hand, just
"-ss 0" will normally seek to a position higher than 0, because it adds
the start time of the file. (The start time is not 0 because the gapless
code skips a few samples from the start.)
Fix this by using the "-seek_timestamp 1" option, which makes "-ss 0" do
what you'd expect it would do.
Also put the -ss option at the right place, before -i. This actually
makes it seek, instead of something completely else. The ".out-3" test
is no different in the -usetoc 0/1 cases, because the seeking is
inaccurate (in both cases).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The FATE server does not report this information anyway and omitting
it makes the successful run send much less data.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'a982c5d74fbc7ff5bd2f2f73af61ae48e9b1bcc6':
tests: drop bc dependency
Conflicts:
tests/fate-run.sh
See: d47eeff274
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This may make fate failures where only the console output is available
easier to analyze
Suggested-by: Andreas Cadhalpun
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '706208ef47bffd525c982975d2756f7b2b220b8d':
fate: Split fate-pixdesc tests and dispatch them through Make
Conflicts:
tests/fate-run.sh
tests/ref/fate/filter-pixdesc
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use it instead of checking CODEC_FLAG_BITEXACT in the first stream's
codec context.
Using codec options inside lavf is fragile and can easily break when the
muxing codec context is not the encoding context.
On openbsd the exif-image-jpg test fails but diff treats the files as
binary due to some non ascii symbols in them. This should force it to
treat them as text, which should result in more informative output
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
${1} is now the filter args and is inappropriate as a unique name for
the test (and causes some FATE issues because of the ':' in them).
${filter} is not used either to replace the ${1} because ${outfile}
already contains a unique name for the test.
* qatar/master:
fate: add an option to generate the references
Conflicts:
doc/fate.texi
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ce378f0dd0c4e5350b3280e6b3e8d6b46fe4b0a3':
fate: Use wmv2 IDCT for wmv2 tests
vorbisdsp: change block_size type from int to intptr_t.
Conflicts:
tests/fate-run.sh
tests/fate/vcodec.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some of the filters tests use globbing characters, especially
brackets for filter pad labels. While most of these strings
are way too complicated to ever match an existing file name
and are therefore kept unchanged in the command line (an old
misfeature of the shell language that happens to be convenient
here), at least one use is simple enough to match random files
lying in the current directory. If that happens, the string,
that was meant to be kept verbatim, is replaced by the file
name, and that causes the test to fail (or worse).
* qatar/master:
fate: workaround for slighly broken 'test' shell builtin
mimic: initialize padding of swap_buf through av_fast_padded_malloc
eamad: initialize padding of bitstream_buf through av_fast_padded_malloc()
raw demuxer: initialize end of partial packets
Conflicts:
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some shells, e.g. minix3, have a broken 'test' builtin which fails
if the first operand of a binary operator looks like a unary operator.
Prefixing the values with 'x' prevents this from happening.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* commit 'e816034a5fa131b13c4ad87bb0b5065b4f5697c6':
fate-seek: remove use of gnu make 3.82 only private modifier
fate: move vsynth reference files to their own directory
fate: move fate-acodec reference files to their own dir
configure: avplay now depends on avresample
fate: split dependencies for fate-seek tests
Conflicts:
configure
tests/fate/seek.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Each fate-seek test depends now only on the corresponding fate-acodec,
fate-vsynth2 or fate-lavf test which creates the file seek-tests
operates on. The tests and references are renamed to match the test they
depend on.
* qatar/master:
mss3: use standard zigzag table
mss3: split DSP functions that are used in MTS2(MSS4) into separate file
motion-test: do not use getopt()
tcp: add initial timeout limit for incoming connections
configure: Change the rdtsc check to a linker check
avconv: propagate fatal errors from lavfi.
lavfi: add error handling to filter_samples().
fate-run: make avconv() properly deal with multiple inputs.
asplit: don't leak the input buffer.
af_resample: fix request_frame() behavior.
af_asyncts: fix request_frame() behavior.
libx264: support aspect ratio switching
matroskadec: honor error_recognition when encountering unknown elements.
lavr: resampling: add support for s32p, fltp, and dblp internal sample formats
lavr: resampling: add filter type and Kaiser window beta to AVOptions
lavr: Use AV_SAMPLE_FMT_NONE to auto-select the internal sample format
lavr: mix: validate internal sample format in ff_audio_mix_init()
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/libx264.c
libavfilter/audio.c
libavfilter/split.c
libavformat/tcp.c
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f919cc7df6ab844bc12f89fe7bef4fb915a47725':
fate: fix acodec/vsynth tests for make 3.81
pcm_mpeg: fix number of consumed bytes to include the header.
avfilter: include required header file avfilter.h in video.h
x86: Avoid movs on BUTTERFLYPS when in AVX mode
x86: use new schema for ASM macros
fate: convert codec-regression.sh to makefile rules
fate: allow tests to specify unit size for psnr comparison
fate: teach videogen/rotozoom to output a single raw video stream
http: Add support for reusing the http socket for subsequent requests
http: Add support for using persistent connections
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The special-case behavior may complicate parsing when the
-show_format_entry option is used programmatically in a script.
The option default=nk=1 achieves the same purpose, if the objective is to
skip printing the single field key.
* qatar/master:
fate: Work around non-standard wc implementations at more places
fate: work around non-standard wc implementations
x86: rv40: Mark rv40_weight functions as MMX2; they use MMX2 instructions.
ac3dsp: simplify x86 versions of ac3_max_msb_abs_int16
fate: use standard diff options
tta: Fix comment about channel number; TTA supports >2 channels.
avfilter: Move ff_get_ref_perms_string() to where it is used.
build: Add 'check' target to run all compile and test targets.
indeo3: validate new frame size before resetting decoder
indeo3: when freeing buffers, set pointers referencing them to NULL as well
indeo3: initialise pixel planes on allocation
indeo3: ensure that decoded cell data is in 7-bit range as presumed by decoder
fate: rename psx-str-v3-mdec to mdec-v3
fate: convert psx-str to a demuxer test
lavf: add mdec to is_intra_only() list
Conflicts:
doc/developer.texi
libavcodec/indeo3.c
libavfilter/video.c
libavformat/utils.c
tests/fate/demux.mak
tests/fate/video.mak
tests/lavf-regression.sh
tests/ref/vsynth1/cljr
tests/ref/vsynth1/ffvhuff
tests/ref/vsynth2/cljr
tests/ref/vsynth2/ffvhuff
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (26 commits)
fate: use diff -b in oneline comparison
Add missing version bumps and APIchanges/Changelog entries.
lavfi: move buffer management function to a separate file.
lavfi: move formats-related functions from default.c to formats.c
lavfi: move video-related functions to a separate file.
fate: make smjpeg a demux test
fate: separate sierra-vmd audio and video tests
fate: separate smacker audio and video tests
libmp3lame: set supported channel layouts.
avconv: automatically insert asyncts when -async is used.
avconv: add support for audio filters.
lavfi: add asyncts filter.
lavfi: add aformat filter
lavfi: add an audio buffer sink.
lavfi: add an audio buffer source.
buffersrc: add av_buffersrc_write_frame().
buffersrc: fix invalid read in uninit if the fifo hasn't been allocated
lavfi: rename vsrc_buffer.c to buffersrc.c
avfiltergraph: reindent
lavfi: add channel layout/sample rate negotiation.
...
Conflicts:
Changelog
doc/APIchanges
doc/filters.texi
ffmpeg.c
ffprobe.c
libavcodec/libmp3lame.c
libavfilter/Makefile
libavfilter/af_aformat.c
libavfilter/allfilters.c
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/avfiltergraph.c
libavfilter/buffersrc.c
libavfilter/defaults.c
libavfilter/formats.c
libavfilter/src_buffer.c
libavfilter/version.h
libavfilter/vf_yadif.c
libavfilter/vsrc_buffer.c
libavfilter/vsrc_buffer.h
libavutil/avutil.h
tests/fate/audio.mak
tests/fate/demux.mak
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
diff -w is not a standard option. This fixes the reference files
to match what the tests actually output and switches to using the
standard diff -b which is sufficient to handle different line ending
styles.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
rtmp: Support 'rtmp_live', an option which specifies if the media is a live stream.
av_samples_fill_array: Mark unmodified function argument as const.
lagarith: add YUY2 decoding support
Support decoding unaligned rgb24 lagarith.
dv: Split profile handling code into a separate file.
flvenc: use AVFormatContext, not AVCodecContext for logging.
mov: Remove write-only variable in mov_read_chan().
fate: Change the probe-format refs to match the final text format committed.
fate: Add avprobe as a make dependency
Add probe fate tests to test for regressions in detecting media types.
fate: Add oneline comparison method
qdm2: clip array indices returned by qdm2_get_vlc().
avplay: properly close/reopen AVAudioResampleContext on channel layout change
avcodec: do not needlessly set packet size to 0 in avcodec_encode_audio2()
avcodec: for audio encoding, reset output packet when it is not valid
avcodec: refactor avcodec_encode_audio2() to merge common branches
avcodec: remove fallbacks for AVCodec.encode() in avcodec_encode_audio2()
Conflicts:
ffplay.c
libavcodec/Makefile
libavcodec/dvdata.c
libavcodec/dvdata.h
libavcodec/qdm2.c
libavcodec/utils.c
libavformat/flvenc.c
libavformat/mov.c
tests/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
dv: Initialize encoder tables during encoder init.
dv: Replace some magic numbers by the appropriate #define.
FATE: pass the decoded output format and audio source file to enc_dec_pcm
FATE: specify the input format when decoding in enc_dec_pcm()
x86inc: support AVX abstraction for 2-operand instructions
configure: detect PGI compiler and set suitable flags
avconv: check for an incompatible changing channel layout
avio: make AVIOContext.av_class pointer to const
nutdec: add malloc check and fix const to non-const conversion warnings
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This will allow decoding to md5 and doing a diff comparison to a reference
checksum instead of a fuzzy stddev or oneoff comparison.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The output format is not always the same as the file extension,
which is sometimes required for correct probing. We can avoid
probing by specifying the format since it is already known.
* qatar/master:
fate: make compare() function compatible with POSIX bc
Update Janne's email address.
APIchanges: Replace Subversion revision numbers by Git hashes.
bytestream: Eliminate one level of pointless macro indirection.
xwd: convert to bytestream2.
vqavideo: port to bytestream2 API
Read preset files with suffix .avpreset
prores: allow user to set fixed quantiser
lavf: remove some disabled code.
lavf: only set average frame rate for video.
lavf: remove a pointless check.
avcodec: add XBM encoder
Conflicts:
Changelog
cmdutils.c
cmdutils.h
doc/APIchanges
libavcodec/Makefile
libavcodec/avcodec.h
libavcodec/version.h
libavcodec/vqavideo.c
libavformat/img2enc.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
resample: allocate a large enough output buffer
fate: fix enc_dec_pcm tests with remote target
wmaenc: remove bit-exact hack
FATE: remove WMA acodec tests
FATE: add WMAv1 and WMAv2 encode/decode tests with fuzzy comparison
FATE: add AC-3 and E-AC-3 encode/decode tests with fuzzy comparison
qtrle: Use bytestream2 functions to prevent buffer overreads.
vqavideo: check malloc return values
x11grab: fix a memory leak exposed by valgrind
threads: fix old frames returned after avcodec_flush_buffers()
MPV: always mark dummy frames as reference
h264: fix deadlocks on incomplete reference frame decoding.
mpeg4: report frame decoding completion at ff_MPV_frame_end().
mimic: don't use self as reference, and report completion at end of decode().
Conflicts:
libavcodec/h264.c
libavcodec/qtrle.c
libavcodec/resample.c
libavcodec/vqavideo.c
libavdevice/x11grab.c
tests/ref/seek/wmav1_asf
tests/ref/seek/wmav2_asf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h264: K&R formatting cosmetics
s3tc.h: Add missing #include to fix standalone header compilation.
FATE: add capability for audio encode/decode tests with fuzzy psnr comparison
FATE: allow a tolerance in the size comparison in do_tiny_psnr()
FATE: use absolute difference from a target value in do_tiny_psnr()
FATE: allow tests to set CMP_SHIFT to pass to tiny_psnr
FATE: use $fuzz directly in do_tiny_psnr() instead of passing it around
Conflicts:
libavcodec/h264.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows for testing floating-point audio encoders across different
platforms where exact comparisons are unreliable due to float rounding
differences.
* qatar/master:
mpeg4dec: use unsigned type for startcode in ff_mpeg4_decode_picture_header
mpeg124: use sign_extend() function
ac3dec: use get_sbits() instead of manually sign-extending
4xm: fix signed overflow
wmavoice: fix a signed overflow
mpegvideo_enc: fix a signed overflow
crc: fix signed overflow
fate: run avconv with -nostats flag
avtools: add -v as alias for -loglevel
avconv: always print stats with AV_LOG_INFO
doc/avconv: add forgotten output/per-stream info to -filter
avconv: add -stats option to enable/disable printing encoding progress
avconv: in output_packet() don't set decoded_data_size for video.
avconv: remove pointless always true condition
avconv: factorize common code in transcode_init()
zmbv: remove memcpy() of decoded frame
mpeg12enc: use sign_extend() function
h264pred: use unsigned types for pixel values, fix signed overflows
h264: fix signed overflows in x*0x01010101 expressions
h264pred: remove unused variables
Conflicts:
avconv.c
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (23 commits)
avconv: Reformat s16 volume adjustment.
ARM: NEON optimised vector_fmac_scalar()
dca: use vector_fmac_scalar from dsputil
dsputil: add vector_fmac_scalar()
latmenc: Fix private options
vf_unsharp: store hsub/vsub in the filter context
vf_unsharp: adopt a more natural order of params in apply_unsharp()
vf_unsharp: rename method "unsharpen" to "apply_unsharp"
vf_scale: apply the same transform to the aspect during init that is applied per frame
vf_pad: fix "vsub" variable value computation
vf_scale: add a "sar" variable
lavfi: fix realloc size computation in avfilter_add_format()
vsrc_color: use internal timebase
lavfi: fix signature for avfilter_graph_parse() and avfilter_graph_config()
graphparser: prefer void * over AVClass * for log contexts
avfiltergraph: use meaningful error codes
avconv: Initialize return value for codec copy path.
fate: use 'run' helper for seek-test
fate: remove seek-mpeg2reuse test
Fix memory (re)allocation in matroskadec.c, related to MSVR-11-0080.
...
Conflicts:
doc/filters.texi
libavfilter/avfilter.h
libavfilter/avfiltergraph.c
libavfilter/avfiltergraph.h
libavfilter/graphparser.c
libavfilter/vf_scale.c
libavfilter/vsrc_color.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ac3enc: Add channel coupling support for the fixed-point AC-3 encoder.
ac3enc: scale floating-point coupling channel coefficients in scale_coefficients() rather than in apply_channel_coupling()
ac3enc: fix encoding of stereo ac3 files when rematrixing is disabled.
wavpack: fix wrong return value in wavpack_decode_block()
avconv: fix parsing metadata specifiers.
fate: use +frame+slice named constants instead of '3'
mpeg12: propagate more real return values through chunk decode error return and fix some indentation
wavpack: use context reset in appropriate places
avconv: move mux_preload and mux_max_delay to options context
avconv: move bitstream filters to options context.
avconv: move rate_emu to options context.
avconv: move max_frames to options context.
avconv: move metadata to options context.
avconv: move ts scale to options context.
avconv: move chapter maps to options context.
avconv: move metadata maps to options context.
avconv: move codec_names to options context.
Conflicts:
avconv.c
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Setting CMP=null uses stdout from the test as the diff record in
the report without further inspection. This can be useful when
the exit status of the test itself determines success while the
output is informative.
Signed-off-by: Mans Rullgard <mans@mansr.com>
All tests are run through the fate-run.sh script which already
sets up redirections. Using the outputs set there simplifies
things somewhat.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The diff may provide useful information even if the command was
unsuccessful. The test is still treated as failed in this case.
Originally committed as revision 24353 to svn://svn.ffmpeg.org/ffmpeg/trunk
All tests use the provided helper functions so prepending $target_exec
and using eval is no longer required.
Originally committed as revision 24317 to svn://svn.ffmpeg.org/ffmpeg/trunk
This allows CMP=stddev in test rules. The test passes if the reported
stddev is <= the FUZZ value (default 1).
Originally committed as revision 24289 to svn://svn.ffmpeg.org/ffmpeg/trunk
This adds the 'oneoff' comparison method. It compares two s16le pcm
files with a max difference <= the fuzz factor treated as success.
Default fuzz is 1. On failure, the full tiny_psnr output is printed.
Originally committed as revision 24134 to svn://svn.ffmpeg.org/ffmpeg/trunk
This passes the following additional variables to the test script:
- CMP method to use comparing output with reference, default 'diff'
- REF reference file, default 'tests/ref/fate/${test}'
- FUZZ maximum fuzz factor in comparison, meaning depends on CMP
Originally committed as revision 24133 to svn://svn.ffmpeg.org/ffmpeg/trunk
This adds a "fate" make target which runs the full FATE test suite.
Individual tests can be run with "make fate-$testname".
The location of the FATE test samples must be specified with the
--samples=PATH option to configure.
The tests/fate-update.sh script regenerates the references files and
test list from the online FATE database. These are checked in since
generating them requires non-standard tools.
Originally committed as revision 22552 to svn://svn.ffmpeg.org/ffmpeg/trunk
