In particular, fix warnings:
*** Undefined node `quoting_and_escaping' in @ref (in doc/muxers.texi l. 767)
*** Undefined node `quoting_and_escaping' in @ref (in doc/muxers.texi l. 772)
This uses page duration instead of byte size to determine when to buffer
the page. Also, it tries to avoid continued pages by buffering the current
page if there are already packets in the page and adding the next packet
would require it to be continued on a new page. This can improve seeking
performance.
The default page duration is 1 second, which is much saner than filling
all page segments by default.
The new options reset the timestamps at each new segment, so that the
generated segments will have timestamps starting close to 0.
It is meant to address trac ticket #1425.
* commit '18e6f087c4a50bede8449ee164778945480be50c':
img2: document the options available
hls: improve options description
hls: use a meaningful long name
hls: add start_number option
h264: check for invalid zeros_left before writing
Conflicts:
doc/demuxers.texi
doc/muxers.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow to specify options affecting the segment list generation.
In particular: add +live and +cache flags.
For a full discussion read trac ticket #1642:
http://ffmpeg.org/trac/ffmpeg/ticket/1642
Also add live M3U8 generation example.
Signed-off-by: Michael Bradshaw <mbradshaw@sorensonmedia.com>
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Add list extended format which specifies in the list file the start and
ending time for each segment. This is required to make it available this
information to external tools, avoiding the need to perform file analysis
in the output segments.
* qatar/master: (27 commits)
avconv: free packet in write_frame() when discarding due to frame number limit
FATE: use +/- flag option syntax for vp8 emu-edge tests
lavf: make av_interleave_packet_per_dts() private.
lavf: deprecate av_read_packet().
oggdec: output correct timestamps for Vorbis
avconv: pass input stream timestamps to audio encoders
lavc: shrink encoded audio packet size after encoding.
xa: set correct bit rate
xa: do not set bit_rate, block_align, or bits_per_coded_sample
xa: fix end-of-file handling
xa: fix timestamp calculation
bink: fix typo in FFALIGN() argument
bink: align plane width to 8 when calculating bundle sizes
doc: pass -Idoc texi2html and texi2pod
doc: texi2pod: add -I flag
movenc: Add a min_frag_duration option
rtsp: Set the default delay to 0.1 s for the RTSP/SDP/RTP demuxers
libavformat: Set the default for the max_delay option to -1
Generate manpages for AV{Format,Codec}Context AVOptions.
doc/avconv: remove entries for AVOptions.
...
Conflicts:
doc/Makefile
doc/ffmpeg.texi
doc/muxers.texi
ffmpeg.c
libavcodec/Makefile
libavcodec/options.c
libavcodec/vp8.c
libavformat/options.c
tests/fate/demux.mak
tests/ref/fate/truemotion1-15
tests/ref/fate/truemotion1-24
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The other fragmentation options (frag_duration, frag_size and
frag_keyframe) are combined with OR, cutting fragments at the
first of the conditions being fulfilled.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (58 commits)
amrnbdec: check frame size before decoding.
cscd: use negative error values to indicate decode_init() failures.
h264: prevent overreads in intra PCM decoding.
FATE: do not decode audio in the nuv test.
dxa: set audio stream time base using the sample rate
psx-str: do not allow seeking by bytes
asfdec: Do not set AVCodecContext.frame_size
vqf: set packet parameters after av_new_packet()
mpegaudiodec: use DSPUtil.butterflies_float().
FATE: add mp3 test for sample that exhibited false overreads
fate: add cdxl test for bit line plane arrangement
vmnc: return error on decode_init() failure.
libvorbis: add/update error messages
libvorbis: use AVFifoBuffer for output packet buffer
libvorbis: remove unneeded e_o_s check
libvorbis: check return values for functions that can return errors
libvorbis: use float input instead of s16
libvorbis: do not flush libvorbis analysis if dsp state was not initialized
libvorbis: use VBR by default, with default quality of 3
libvorbis: fix use of minrate/maxrate AVOptions
...
Conflicts:
Changelog
doc/APIchanges
libavcodec/avcodec.h
libavcodec/dpxenc.c
libavcodec/libvorbis.c
libavcodec/vmnc.c
libavformat/asfdec.c
libavformat/id3v2enc.c
libavformat/internal.h
libavformat/mp3enc.c
libavformat/utils.c
libavformat/version.h
libswscale/utils.c
tests/fate/video.mak
tests/ref/fate/nuv
tests/ref/fate/prores-alpha
tests/ref/lavf/ffm
tests/ref/vsynth1/prores
tests/ref/vsynth2/prores
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
adpcm: Clip step_index values read from the bitstream at the beginning of each frame.
oma: don't read beyond end of leaf_table.
doxygen: Remove documentation for non-existing parameters; misc small fixes.
Indeo3: fix crashes on corrupt bitstreams.
msmpeg4: Replace forward declaration by proper #include.
segment: implement wrap around
avf: reorder AVStream and AVFormatContext
aacdec: Remove erroneous reference to global gain from the out of bounds scalefactor error message.
Conflicts:
libavcodec/indeo3.c
libavformat/avformat.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Provide a way to wrap around the segment index so pseudostreaming
live through a web server and html5 browser is simpler.
Also ensure that 0 (disable) is a valid value across the options
providing wrap around.
* qatar/master: (26 commits)
avconv: deprecate the -deinterlace option
doc: Fix the name of the new function
aacenc: make sure to encode enough frames to cover all input samples.
aacenc: only use the number of input samples provided by the user.
wmadec: Verify bitstream size makes sense before calling init_get_bits.
kmvc: Log into a context at a log level constant.
mpeg12: Pad framerate tab to 16 entries.
kgv1dec: Increase offsets array size so it is large enough.
kmvc: Check palsize.
nsvdec: Propagate errors
nsvdec: Be more careful with av_malloc().
nsvdec: Fix use of uninitialized streams.
movenc: cosmetics: Get rid of camelCase identifiers
swscale: more generic check for planar destination formats with alpha
doc: Document mov/mp4 fragmentation options
build: Use order-only prerequisites for creating FATE reference file dirs.
x86 dsputil: provide SSE2/SSSE3 versions of bswap_buf
rtsp: Remove some unused variables from ff_rtsp_connect().
avutil: make intfloat api public
avformat_write_header(): detail error message
...
Conflicts:
doc/APIchanges
doc/ffmpeg.texi
doc/muxers.texi
ffmpeg.c
libavcodec/kmvc.c
libavcodec/x86/Makefile
libavcodec/x86/dsputil_yasm.asm
libavcodec/x86/pngdsp-init.c
libavformat/movenc.c
libavformat/movenc.h
libavformat/mpegtsenc.c
libavformat/nsvdec.c
libavformat/utils.c
libavutil/avutil.h
libswscale/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
h264: clear trailing bits in partially parsed NAL units
vc1: Handle WVC1 interlaced stream
xl: Fix overreads
mpegts: rename payload_index to payload_size
segment: introduce segmented chain muxer
lavu: add AVERROR_BUG error value
avplay: clear pkt_temp when pkt is freed.
qcelpdec: K&R formatting cosmetics
qcelpdec: cosmetics: drop some pointless parentheses
x86: conditionally compile dnxhd encoder optimizations
Revert "h264: skip start code search if the size of the nal unit is known"
swscale: fix formatting and indentation of unscaled conversion routines.
h264: skip start code search if the size of the nal unit is known
cljr: fix buf_size sanity check
cljr: Check if width and height are positive integers
Conflicts:
libavcodec/cljr.c
libavcodec/vc1dec.c
libavformat/Makefile
libavformat/mpegtsenc.c
libavformat/segment.c
libswscale/swscale_unscaled.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
isom: sort and pretty-print codec_movaudio_tags[]
isom: remove pointless comments in codec_movaudio_tags[]
isom: remove commented-out tag for vorbis
movenc: write 'chan' tag for AC-3 in MOV
mov: add support for reading and writing the 'chan' tag
audioconvert: add some additional channel and channel layout macros
audioconvert: change 7.1 "wide" layout to use side surround channels
movenc: simplify handling of pcm vs. adpcm vs. other compressed codecs
doc: update documentation to use avconv
doc: update demuxers section
doc: extend external library coverage
doc: split platform specific information
doc: port the git-howto to texinfo
doc: provide fallback css and customize @float
doc: document fate in a texinfo
doxy: change hue value to match our green
Conflicts:
doc/fate.txt
doc/ffserver.texi
doc/general.texi
doc/muxers.texi
doc/protocols.texi
doc/t2h.init
libavformat/isom.c
libavformat/mov.c
libavutil/avutil.h
tests/ref/acodec/pcm_s16be
tests/ref/acodec/pcm_s24be
tests/ref/acodec/pcm_s32be
tests/ref/acodec/pcm_s8
tests/ref/lavf/mov
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
H.264: fix filter_mb_fast with 4:4:4 + 8x8dct
alsa: limit buffer_size to 32768 frames.
alsa: fallback to buffer_size/4 for period_size.
doc: replace @pxref by @ref where appropriate
mpeg1video: don't abort if thread_count is too high.
segafilm: add support for videos with cri adx adpcm
gxf: Fix 25 fps DV material in GXF being misdetected as 50 fps
libxvid: Add const qualifier to silence compiler warning.
H.264: improve qp_thresh check
H.264: use fill_rectangle in CABAC decoding
H.264: Remove redundant hl_motion_16/8 code
H.264: merge fill_rectangle into P-SKIP MV prediction, to match B-SKIP
H.264: faster P-SKIP decoding
H.264: av_always_inline some more functions
H.264: Add x86 assembly for 10-bit H.264 predict functions
swscale: rename uv_off/uv_off2 to uv_off_px/byte.
swscale: implement error dithering in planarCopyWrapper.
swscale: error dithering for 16/9/10-bit to 8-bit.
swscale: fix overflow in 16-bit vertical scaling.
swscale: fix crash in 8-bpc bilinear output without alpha.
...
Conflicts:
doc/developer.texi
libavdevice/alsa-audio.h
libavformat/gxf.c
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/swscale_unscaled.c
libswscale/x86/swscale_template.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_crop
tests/ref/lavfi/pixfmts_hflip
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ac3dec: fix processing of delta bit allocation information.
vc1: fix fate-vc1 after previous commit.
wmv3dec: fix playback of complex WMV3 files using simple_idct.
make av_dup_packet() more cautious on allocation failures
make containers pass palette change in AVPacket
introduce side information for AVPacket
Politic commits that have not been pulled:
Update regtest checksums after revision 6001dad.
Replace more FFmpeg references by Libav.
Replace references to ffmpeg-devel with libav-devel; fix roundup URL.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Around 01/28/11 18:56, Ronald S. Bultje scribbled:
> That patch is now merged, can you submit the update to muxers.texi?
> Then we'll apply the whole thing.
See attached. I hope the documentation is enough.
--
Georgi Chorbadzhiyski
http://georgi.unixsol.org/
From c236024b8254f5c2c45934c30fff390cb0e55a5e Mon Sep 17 00:00:00 2001
From: Georgi Chorbadzhiyski <gf@unixsol.org>
Date: Tue, 25 Jan 2011 13:09:17 +0200
Subject: [PATCH] mpegts: Replace defines in with AVOptions
This patch adds support for setting transport_stream_id,
original_network_id, service_id, pmt_start_pid and start_pid
in mpegts muxer.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
