This is used to signal that image should be stored in metadata
as cover image.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
PSEUDOPAL pixel formats are not paletted, but carried a palette with the
intention of allowing code to treat unpaletted formats as paletted. The
palette simply mapped the byte values to the resulting RGB values,
making it some sort of LUT for RGB conversion.
It was used for 1 byte formats only: RGB4_BYTE, BGR4_BYTE, RGB8, BGR8,
GRAY8. The first 4 are awfully obscure, used only by some ancient bitmap
formats. The last one, GRAY8, is more common, but its treatment is
grossly incorrect. It considers full range GRAY8 only, so GRAY8 coming
from typical Y video planes was not mapped to the correct RGB values.
This cannot be fixed, because AVFrame.color_range can be freely changed
at runtime, and there is nothing to ensure the pseudo palette is
updated.
Also, nothing actually used the PSEUDOPAL palette data, except xwdenc
(trivially changed in the previous commit). All other code had to treat
it as a special case, just to ignore or to propagate palette data.
In conclusion, this was just a very strange old mechnaism that has no
real justification to exist anymore (although it may have been nice and
useful in the past). Now it's an artifact that makes the API harder to
use: API users who allocate their own pixel data have to be aware that
they need to allocate the palette, or FFmpeg will crash on them in
_some_ situations. On top of this, there was no API to allocate the
pseuo palette outside of av_frame_get_buffer().
This patch not only deprecates AV_PIX_FMT_FLAG_PSEUDOPAL, but also makes
the pseudo palette optional. Nothing accesses it anymore, though if it's
set, it's propagated. It's still allocated and initialized for
compatibility with API users that rely on this feature. But new API
users do not need to allocate it. This was an explicit goal of this
patch.
Most changes replace AV_PIX_FMT_FLAG_PSEUDOPAL with FF_PSEUDOPAL. I
first tried #ifdefing all code, but it was a mess. The FF_PSEUDOPAL
macro reduces the mess, and still allows defining FF_API_PSEUDOPAL to 0.
Passes FATE with FF_API_PSEUDOPAL enabled and disabled. In addition,
FATE passes with FF_API_PSEUDOPAL set to 1, but with allocation
functions manually changed to not allocating a palette.
Allows to manage the AV_LOG_PRINT_LEVEL flag as a prefix to the loglevel
option value, similar to the existing AV_LOG_SKIP_REPEATE flag. Adds
support for setting flags relative to the existing value by using a +/-
prefix.
Previous version reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
avdevice_register_all() is still required to register devices into
lavf (this is required due to lavd being somewhat of a hack).
Signed-off-by: Josh de Kock <josh@itanimul.li>
With certain types of input and the filter chain getting re-initialized
or re-configured, multiple nullptr AVSubtitles can get pushed into
sub2video_update() in a row from sub2video_heartbeat.
This causes end_pts, and on the next round pts, to become INT64_MAX,
latter of which signals EOF in framesync, leading to complete loss of
subtitles from that point on.
Thus, check that the sub2video.end_pts is smaller than INT64_MAX
in a similar fashion to sub2video_flush before sending out the
nullptr AVSubtitle. This keeps premature EOFs from happening in
framesync and the subtitle overlay is kept past the filter chain
re-initializations/configurations.
The generic code should be able to finish the streams just fine initializing
and flushing the filters and codecs properly.
Fixes the following command:
ffmpeg -f lavfi -i "testsrc=d=0.1[out0];aevalsrc=0:d=0[out1]" -af apad -shortest -f framecrc -
Signed-off-by: Marton Balint <cus@passwd.hu>
Should prevent unnecessary copy of data in cases where new references
to the packet are created within the muxer or a bitstream filter.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
It's been a noop for years, and it's been argued that in-band headers
should not be forcedly removed without the user's explicit request.
Also, as the FIXME line stated, this is a job for a bitstream filter
like extract_extradata, remove_extradata, dump_extradata, and
filter_units.
Signed-off-by: James Almer <jamrial@gmail.com>
When a decoded stream is being looped, after each post-EOF rewind,
decoders are flushed in seek_to_start(). This only drains 1 frame, and
thus the output has a few frames missing at the tail of each iteration
except the last.
With this patch, process_input is looped till process_input_packet
reaches EOF.
Fixes#7081
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Support dump bit stream filter option in ffmpeg -h full and
ffmpeg -h bsf=FooBar.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes a regression since 2a88ebd096 which caused
an infinite loop in the subtitle decoding.
Fixes ticket #6796.
Signed-off-by: Marton Balint <cus@passwd.hu>
ffmpeg -h display "max_error_rate" option help information have
been cut off, the root cause is used a wrong initial order.
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit cdc78058c7.
It introduced several issues in the command line tools, and it's
implementing a new API that may still see some changes.
Revert for the time being until the state of the API is defined.
Signed-off-by: James Almer <jamrial@gmail.com>
coded_width/height are unnitialized and will be overwritten by
dec_ctx->width/height in avcodec_open2()
This fixes tiket #6958.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: James Almer <jamrial@gmail.com>
On systems which deliver SIGPIPE (Unices), a broken pipe will currently
result in the immediate termination of the ffmpeg process (the default
disposition as required by POSIX). This is undesirable, because while
the broken pipe is likely fatal to useful cleanup of whatever component
is writing to it, there might be other components which can do useful
cleanup - for example, a muxer on another stream may still need to write
indexes to complete a file. Therefore, set the signal disposition for
SIGPIPE to ignore the signal - the call which caused the signal will
fail with EPIPE and the error will be propagated upwards like any other
I/O failure on a single stream.
The function avformat_alloc_context() will return a NULL pointer on
failure. However, in function read_ffserver_streams(), its return value
is not validated and the subsequent dereference may result in a bad
memory access bug. Check its return value against NULL and avoid
potential NULL dereference.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This was added in early 2013 and abandoned several months later; as far as
I can tell, there are no external users. Future OpenCL use will be via
hwcontext, which requires neither special OpenCL-only API nor global state
in libavutil.
All internal users are also deleted - this is just the unsharp filter
(replaced by unsharp_opencl, which is more flexible) and the deshake filter
(no replacement).
add return value check to supress the build warning message like
"warning: ignoring return value" when use attribute -Wunused-result.
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Reviewed-by: 刘歧 <lq@chinaffmpeg.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Adds ui64 (uint64_t) as a possible type for SpecifierOpt. This enables
use of uint64_t options with SpecifierOpt such as channel_layout
when expressed as a 64 bit channel mask.
Signed-off-by: pkviet <pkv.stream@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For some strange reason "-t" option was only implemented
for input files while both "-t" and "-to" were available
for use for output files. This made extracting a range from
input file inconvenient.
This patch enables -to option for input so one can do
ffmpeg -ss 1:23:20 -to 1:27:22.3 -i myinput.mkv ...
Signed-off-by: Vitaly _Vi Shukela <vi0oss@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
With there being two hwaccels that use the CUDA pix_fmt now, just
relying on the pix_fmt to identify the selected hwaccel is not enough
anymore.
So this checks if the user explicitly selected a hwaccel, and only
accepts that one.
* commit 'a58873b11198d04670b7f98f5a8a749d742db7c5':
avconv: when using -loop option bail out if seek to start fails
Merged-by: James Almer <jamrial@gmail.com>
Some parts of the code are based on a patch by
Timo Rothenpieler <timo@rothenpieler.org>
Merges Libav commit b9129ec466.
Due to the name clash with our cuvid decoder, rename it to nvdec.
This commit also changes the Libav code to dynamic loading of the
cuda/cuvid libraries.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
