Freeze picture release should be set to 1 when we're responding to a
fast update request. For simplicity we set it for all intra frames,
including those that starts a GOP.
Fixes issue where Tandberg MXP1700 does not recover from packet loss
state since it's waiting for the freeze picture relase indication.
Bug-Id: 873
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Ref H.261 recommendation section 4.2.1.3, setting the still image flag
to 1 disables still image mode. Some decoders require this in order to
decode the bitstream as normal video.
Fixes H.261 calls to Cisco E20.
Also, reserved (aka spare) bits should be set to 1 unless specified
otherwise.
Bug-Id: 872
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Every chunk needs at least 8 bytes for chunk_type and chunk_size.
Prevent a possible infinite loop.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
They are used by dnxhd and mpegvideo_enc exclusively, move them to codec
private options instead.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
ELS and ePIC decoder courtesy of Maxim Poliakovski,
cleanup and integration by Diego Biurrun.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The container cropping is applied only when difference is within 16
pixels, and the smallest value between the two is chosen.
Bug-Id: 383
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
get_bits should not be used with more than 25 bits.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Using the internal DXTC routines brings support for non multiple of 4
textures. A new test is added to cover this feature. Hashes differ
since the decoding algorithm is different, though no visual changes
have been spotted.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This module implements generic texture decompression from different
families (DXTC, RGTC, BCn) and texture compression DXTC 1, 3, and 5.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Bump the minimum libvpx version to 1.3.0 and rework the configure logic
to fail only if no decoders and encoders are found.
Based on the original patch from Vittorio.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
14496-3 suggests packing main_data of MP3 that is usually scattered
into multiple frames due to bit reservoir.
However, after packing main_data into a access unit, bitrate index
in the MPEG audio frame header doesn't match with actual frame size.
In order to accept this, this patch removes unnecessary frame size
checking on mp3 decoder.
Also, mov demuxer was changed to use MP3 parser only on special cases
(QT MOV with specific sample description) to avoid re-packetizing.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
WebPMemoryWriterClear() must be used instead of free() when
libwebp ABI version is > 0x0203.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Also use the frame pixel format instead of the one from the codec
context, which is more robust.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The AVCodecContext width, height, coded_width, coded_height and format
are used mainly as decoding hints and they get internally overwritten
during the data parsing stage.
Do not assume they match the last AVFrame provided by
avcodec_decode_video2 and assimilated functions since multi-threading
and other frame reordering might make those values to refer to frames
that will be outputted in the future.
CC: libav-stable@libav.org
Fixes clang warning "absolute value function 'fabsf' given an argument
of type 'double' but has parameter of type 'float' which may cause
truncation of value [-Wabsolute-value]".
Having this macro in an header only facilitates the use of such header.
The code increase is minimal and files have one less dependency
on mpegvideo.h.
The main ff_alloc_picture() function is made more generic with all the
parameters necessary as arguments. This will allows to move most of the
related functions to a separate file later.
Right now wrappers are provided to try and minimize the number of
changes in the code.
The channel configuration can be delivered only by the PCE,
try to parse it first and not try to decode until a channel
configuration is set.
CC: libav-stable@libav.org
These are defined in ISO/IEC 14496-3:2009/PDAM 4 for 6.1 and 7.1.
It also defines another 7.1 layout with configuration 14, that one
is not added here for now.
11: 3/3.1 FC FL+FR BL+BR BC LFE
12: 3/2/2.1 FC FL+FR SiL+SiR BL+BR LFE
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
FDK AAC encoder outputs SCE(front)+CPE(front)+CPE(back)+CPE(back) on
MODE_7_1_REAR_SURROUND configuration.
Since decoder couldn't properly map 4 back channels, decoding failed
unless -request_channel_layout 0x8000000000000000 has been specified.
Now we treat first CPE(back) as CPE(side) on channel mapping.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The decoder assigns channels using default channel configuration
for 5.1ch when it parses an ADTS frame header using consecutive
channel ids.
When a PCE comes, it reassigns channels using PCE configuration
using directly the ids provided. They can be arbitrary.
Always use consecutive channel ids to avoid decoding glitches due
spurious reconfigurations due the channel ids mismatch between the
two otherwise-identical channel maps.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The old logic required an explicit clearing of the lists first and was
prone to overflow the DXVA2 struct in some circumstances.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Personally, I need the decoder to back out if get_format() returns no
usable pixel format. This didn't work because the error code was not
propagated down the call chain. This in turn happened because the
variable declaration removed in this patch shadowed the variable, whose
value is returned at the end of the function. Consequently, failures of
decode_nal_unit() were ignored in this place.
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some clients incorrectly set 24 as bits_per_coded_sample, while
the actual value is preserved in one of the codec headers.
In order to work around this, delay the check until decode_frame().
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This is useful for client programs to ask for nv12 surfaces instead of the
current default (uyvy), since those are more efficient to decode to.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Use the Multi-library interface to load at runtime x265 libraries
supporting alternative bit depths (e.g. 8bit and 16bit).
The linked library will try to load the library supporting the
pixel format if it is not supported by itself.
Fallback requesting the native library (passing 0 to x265_api_get) if
a library supporting the requested bit depth is not available.
Signed-off-by: Gopu Govindaswamy <gopu@multicorewareinc.com>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The header had a wrong version description.
Bug-Id: 808
Signed-off-by: Shiina Hideaki <shiina@yndrd.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The previous version checked for 14-bit streams and did not properly
work across buffer boundaries.
Use the 64-bit parser state to make extended sync word detection work
across buffer boundary and check the extended sync word for 16-bit LE
and BE core streams to reduce probability of alias sync detection.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
If in compression mode rice_limit = 0 leads to call
`show_bits(gb, k)` in `decode_scalar` with k = 0.
Request a sample in case it is valid and it should be accepted.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
CC: libav-stable@libav.org
The decode_array_0000 assumed that 64 is the minimal block size
while it is not.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Quickdraw packs data as a series of codes that the application is supposed
to handle, but it does not define any order in which they might appear.
Since it's unfeasible to support *all* opcodes defined by the spec,
only handle well-known blocks containing video data and ignore any unknown
or unsupported ones.
Move palette loading and rle decoding to separate functions to resue them
in other blocks and drop format initialization in init since it can
support more formats than pal8.
Validate width and height.
For max_order = 0 the clipping range is invalid. (amin = 2, amax = 1)
CC: libav-stable@libav.org
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Also change the type of begin, end and smp to ptrdiff_t to make the
comparison well-defined.
CC: libav-stable@libav.org
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The minimum of the ath(x, ATH_ADD) function depends on ATH_ADD.
This patch uses the first order approximation to determine it.
For ATH_ADD = 4 this results in the value at 3407.06812 (-5.24241638)
not the one at 3410 (-5.24237967).
CC: libav-stabl@libav.org
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
avctx->bits_per_raw_sample is used in get_sbits_long, which only
supports up to 32 bits.
CC: libav-stable@libav.org
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
