This commit uses the new EbmlWriter API to write the length fields
of the BlockGroup and its descendants that are themselves Master
elements (namely BlockAdditions and BlockMore) on the least amount of
bytes.
This fixes regressions introduced when the special code for writing
general subtitles was removed. Accordingly, the binsub-mksenc and
matroska-zero-length-block FATE-tests have now been reverted back
to their old state again; the advantages of this approach are evident
with the matroska-vp8-alpha-remux test which up until now wrote
all the length fields of all BlockGroups, BlockAdditions and BlockMore
on eight bytes.
Using the EbmlWriter API also allowed to improve locality in
mkv_write_block(): E.g. both DiscardPadding as well as the
BlockAdditional side-data are now directly used to add elements
to the writer whereas the earlier code had to first check
for whether a BlockGroup should be used and then check again
(after the place where a BlockGroup would be opened if one were
used) for whether there is DiscardPadding or BlockAdditional
side-data to write.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Once upon a time, mkv_write_block() only wrote a (Simple)Block,
not a BlockGroup which is needed for subtitles to convey
the duration. But with the introduction of support for writing
BlockAdditions and DiscardPadding (both of which require a BlockGroup),
mkv_write_block() can also open and close a BlockGroup of its own. This
naturally led to some code duplication which is removed in this commit.
This new code leads to one regression: It always uses eight bytes for
the BlockGroup's length field, whereas the earlier code usually used the
lowest amount of bytes needed. This will be fixed in a future commit.
This temporary regression is also the reason for changes to the
binsub-mksenc and matroska-zero-length-block fate tests.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also check the (user-provided) tags for being overlong; the earlier
code had an implicit unchecked size_t->int conversion.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To trigger this bug, use `paletteuse=dither=bayer:bayer_scale=0`; you will see
that adjacent pixel lines will use the same dither pattern, instead of being
shifted from each other by 32 units (0x20).
One way to demostrate the bug is:
$ convert -size 64x256 gradient:black-white -rotate 270 grad.png
$ echo 'P2 2 1 255 0 255' > bw.pnm
$ ffmpeg -i grad.png -filter_complex 'movie=bw.pnm,scale=256x1[bw]; [0:v][bw]paletteuse=dither=bayer:bayer_scale=0' gradbw.png
Previously: https://www.rm.cloudns.org/img/uploaded/0bd152c11b9cd99e5945115534b1bdde.png
Now: https://www.rm.cloudns.org/img/uploaded/89caaa5e36c38bc2c01755b30811f969.png
This was caused by passing inconsistent color vs (a,r,g,b) parameters to
color_get(), and NBITS being 5 meaning actually hitting the same cache node
does happen in this case, but ONLY if bayer_scale is zero.
The fix is passing the correct color value to color_get().
Also added a previous-failing FATE test; image comparison of the first frame:
Previously: https://www.rm.cloudns.org/img/uploaded/d0ff9db8d8a7d8a3b8b88bbe92bf5fed.png
Now: https://www.rm.cloudns.org/img/uploaded/a72389707e719b5cd1c58916a9e79ca8.png
(on this less synthetic test image, the bug basically causes noise from cache
hits vs misses)
Tested: FATE passes, which exercises this filter but at the default bayer_scale.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
This is similar to the faststart option of the mov muxer, yet
in contrast to it it works together with reserve_index_space
(the equivalent to reserved_moov_size): If the reserved space
does not suffice, the data is shifted; if not, the Cues are
written at the front without shifting the data.
Several tests that cover (not only) this have been added.
Implements #7017.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It returns a pointer inside the fifo's buffer, which cannot be safely
used without accessing AVFifoBuffer internals. It is easier and safer to
use av_fifo_generic_peek_at().
mvhd and tkhd present the post-editlist duration, while mdhd should
have the pre-editlist duration. Regression since c2424b1f3.
Signed-off-by: Martin Storsjö <martin@martin.st>
- No longer mixes u8 and u16 component accesses (this was UB)
- De-duplicated 8->16 conversion
- De-duplicated component -> plane+offset conversion
- De-duplicated planar + packed RGB
- No longer calls ff_fill_rgba_map
- Removed redundant comp_mask data member
- RGB0 and related formats no longer write an alpha value to the 0 byte
- Non-planar YA formats now work correctly
- High-bit-depth semi-planar YUV now works correctly
And expose the parsed values as frame side data. Update FATE results to
match.
It's worth documenting that this relies on the dovi configuration record
being present on the first AVPacket fed to the decoder, which in
practice is the case if if the API user has called something like
av_format_inject_global_side_data, which is unfortunately not the
default.
This commit is not the time and place to change that behavior, though.
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To avoid the ref for this growing to a very large size when attaching
the parsed RPU side data. Since this sample does not have any dynamic
metadata, two frames will serve just as well as 100.
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Adds support for concat demuxer to copy the side data information
from the input file to the resulting file. It will behave like the
metadata copy, where the metadata of the first file is kept in the
the output file.
Extract the current code that already performs the stream side_data
copy into a separate method and reuse the method in the concat demuxer.
Signed-off-by: Gerard Sole <g.sole.ca@gmail.com>
The mpeg4 encoder is slice-threaded and its output depends upon
the number of threads used. Therefore all tests of this encoder
use a hardcoded number of threads (ENC_OPTS in fate-run.sh contains
"-threads 1"; only the vsynth%-mpeg4-thread tests override this
for the mpeg4 encoder, but they also use a hardcoded value to
be consistent across different systems); only the new shortest
and copy-shortest[12] (implicitly due to the sample used) tests
don't and this leads to FATE-failures.
Fix this by explicitly setting the thread count.
Also switch the shortest test to framecrc, because hashing side data
is itchy even though the side data used here (AV_PKT_DATA_QUALITY_STATS)
has a defined endianness.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, the code doing this is spread over several places and may
behave in unexpected ways. E.g. automatic 'default' marking is only done
for streams fed by complex filtergraphs. It is also applied in the order
in which the output streams are initialized, which is effectively
random.
Move processing the dispositions at the end of open_output_file(), when
we already have all the necessary information.
Apply the automatic default marking only if no explicit -disposition
options were supplied by the user, and apply it to the first stream of
each type (excluding attached pics) when there is more than one stream
of that type and no default markings were copied from the input streams.
Explicitly document the new behavior.
Changes the results of some tests, where the output file gets a default
disposition, while it previously did not.
Also covers muxing and demuxing of nonstandard FLAC channel layouts
and the multi-dim-quant option of the FLAC encoder
(all of which was hitherto uncovered).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Provides coverage for the muxer.
(Thanks to tresh for modifying the whitespace commit hook
to allow to push this ref file with tabs.)
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It uses the test-lrc.lrc sample which was added years ago, but never
used until now.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This information is coded in a standard MP4 KindBox and utilizes the
scheme and values as per the DASH role scheme defined in MPEG-DASH.
Other schemes are technically allowed, but where multiple schemes
define the same concepts, the DASH scheme should be utilized.
Such flagging is additionally utilized by the DASH-IF CMAF ingest
specification, enabling an encoder to inform the following component
of the roles of the incoming media streams.
A test is added for this functionality in a similar manner to the
matroska test.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
They already uncovered an uninitialized-value bug in the ATRAC3 code
in the demuxer; and provide coverage for ID3v2.3.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The new format (given in big/little endian forms) matches the
existing X2RGB10 format, except with B and R channels switched.
AV_PIX_FMT_X2BGR10 data often is created by OpenGL programs
whose buffers use the GL_RGB10 internal format.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This resolves a problem where conversions from YUV to X2RGB10LE
would produce color values a factor 4 too small, because an 8-bit
value was placed in a 10-bit channel.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
