And remove the function altogether while at it. It's a duplicate of
another.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '5b145290df2998a9836a93eb925289c6c8b63af0':
lavc: Add support for increasing hardware frame pool sizes
Merged-by: Mark Thompson <sw@jkqxz.net>
This number is definitely required when frame threading is enabled, so
add it here rather than forcing all users to handle it themselves.
DXVA2 contained this addition in specific code as well (therefore being
added twice in the internal case) - just remove it from there.
AVCodecContext.extra_hw_frames is added to the size of hardware frame
pools created by libavcodec for APIs which require fixed-size pools.
This allows the user to keep references to a greater number of frames
after decode, which may be necessary for some use-cases.
It is also added to the initial_pool_size value returned by
avcodec_get_hw_frames_parameters() if a fixed-size pool is required.
This removes the dependency that hardware pixel formats previously had on
AVHWAccel instances, meaning only those which actually do something need
exist after this patch.
Also updates avcodec_default_get_format() to be able to choose hardware
formats if either a matching device has been supplied or no additional
external configuration is required, and avcodec_get_hw_frames_parameters()
to use the hardware config rather than searching the old hwaccel list.
In commit 061a0c14bb ("decode: restructure the core decoding code"), the
deprecated avcodec_decode_* APIs were reworked so that they called into the
new avcodec_send_packet / avcodec_receive_frame API. This had the side effect
of prohibiting sending new packets containing data after a drain
packet, but in previous versions of FFmpeg this "worked" and some
applications relied on it.
To restore some compatibility, reset the codec if we receive a new non-drain
packet using the old API after draining has completed. While this does
not give the same behaviour as the old API did, in the majority of cases
it works and it does not require changes to any other part of the decoding
code.
Fixes ticket #6775
Signed-off-by: James Cowgill <jcowgill@debian.org>
Signed-off-by: Marton Balint <cus@passwd.hu>
This removes the dependency that hardware pixel formats previously had on
AVHWAccel instances, meaning only those which actually do something need
exist after this patch.
Also updates avcodec_default_get_format() to be able to choose hardware
formats if either a matching device has been supplied or no additional
external configuration is required, and avcodec_get_hw_frames_parameters()
to use the hardware config rather than searching the old hwaccel list.
The FF_CODEC_CAP_HWACCEL_REQUIRE_CLASS mechanism is deleted because it
no longer does anything (the codec already contains the pointers to the
matching hwaccels).
* commit 'b46a77f19ddc4b2b5fa3187835ceb602a5244e24':
lavc: external hardware frame pool initialization
Includes the fix from e724bdfffb
Merged-by: James Almer <jamrial@gmail.com>
There is no reason to keep this intact when decoding failed, specially
as private_ref is supposed to always be NULL when a frame is returned to
the user.
Currently, AVHWAccels are looked up using a (codec_id, pixfmt) tuple.
This means it's impossible to have 2 decoders for the same codec and
using the same opaque hardware pixel format.
This breaks merging Libav's CUVID hwaccel. FFmpeg has its own CUVID
support, but it's a full stream decoder, using NVIDIA's codec parser.
The Libav one is a true hwaccel, which is based on the builtin software
decoders.
Fix this by introducing another field to disambiguate AVHWAccels, and
use it for our CUVID decoders. FF_CODEC_CAP_HWACCEL_REQUIRE_CLASS makes
this mechanism backwards compatible and optional.
This will be useful in the CUVID hwaccel. It should also eventually
replace current decoder-specific mechanisms used by various other
hwaccels.
Merges Libav commit 704311b294.
If the get_buffer() call fails, the frame might have some side data
already set. Make sure it gets freed.
Merges Libav commit de77671438.
Signed-off-by: James Almer <jamrial@gmail.com>
Commit b46a77f19d accidentally broke this (requested change that was
added to the patch later and which was not fully tested).
Signed-off-by: Mark Thompson <sw@jkqxz.net>
This adds a new API, which allows the API user to query the required
AVHWFramesContext parameters. This also reduces code duplication across
the hwaccels by introducing ff_decode_get_hw_frames_ctx(), which uses
the new API function. It takes care of initializing the hw_frames_ctx
if needed, and does additional error handling and API usage checking.
Support for VDA and Cuvid missing.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This flag replaces the deprecated, non-prefixed HWACCEL_CODEC_CAP_EXPERIMENTAL
one.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Use the AVFrame.opaque_ref field. The original user's opaque_ref is
wrapped in the lavc struct and then unwrapped before the frame is
returned to the caller.
This new struct will be useful in the following commits.
Hardware accelerated decoding generally uses AVHWFramesContext for pool
allocation of hardware surfaces. These are setup to allocate surfaces
aligned to hardware and hwaccel API requirements. Due to the
architecture, av_hwframe_get_buffer() will return AVFrames with
the dimensions set to the aligned sizes.
This causes some decoders (like hevc) return these aligned size as
final frame size, instead of cropping them to the video's actual
dimensions. To make sure this doesn't happen, crop the frame to the
size the decoder expects when ff_get_buffer() is called.
Merges Libav commit 3fdf50f9e8.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
So a hwaccel can access avctx->hwaccel in init for whatever reason. This
is for the new d3d hwaccel API. We could create separate entrypoints for
each of the 3 hwaccel types (dxva2, d3d11va, new d3d11va), but this
seems nicer.
Merges Libav commit bd747b9226.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Hardware accelerated decoding generally uses AVHWFramesContext for pool
allocation of hardware surfaces. These are setup to allocate surfaces
aligned to hardware and hwaccel API requirements. Due to the
architecture, av_hwframe_get_buffer() will return AVFrames with
the dimensions set to the aligned sizes.
This causes some decoders (like hevc) return these aligned size as
final frame size, instead of cropping them to the video's actual
dimensions. To make sure this doesn't happen, crop the frame to the
size the decoder expects when ff_get_buffer() is called.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Use avci->last_pkt_props to get the side data. Using |pkt| doesn't work
when FF_API_MERGE_SD is set, as the compressed side data is expanded into
|tmp|, leaving the original |pkt| unchanged.
Signed-off-by: James Almer <jamrial@gmail.com>
So a hwaccel can access avctx->hwaccel in init for whatever reason. This
is for the new d3d hwaccel API. We could create separate entrypoints for
each of the 3 hwaccel types (dxva2, d3d11va, new d3d11va), but this
seems nicer.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* commit '019ab88a95cb31b698506d90e8ce56695a7f1cc5':
lavc: add an option for exporting cropping information to the caller
Merged-by: James Almer <jamrial@gmail.com>
So, all frames and errors are correctly reported in order.
Also limit the numbers of error during draining to prevent infinite loop.
This fix fate failure with THREADS>=4:
make fate-h264-attachment-631 THREADS=4
This also reverts a755b725ec.
Suggested-by: wm4, Ronald S. Bultje, Marton Balint
Reviewed-by: w4 <nfxjfg@googlemail.com>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
* commit '972c71e9cb63e24f57ee481e413199c7d88a8813':
lavc: add support for filtering packets before decoding
Merged-by: James Almer <jamrial@gmail.com>
* commit '549d0bdca53af7a6e0c612ab4b03baecf3a5878f':
decode: be more explicit about storing the last packet properties
Also copy pkt->size in extract_packet_props(), as it's needed for
AVFrame.pkt_size
Merged-by: James Almer <jamrial@gmail.com>
