After c2a8f0fcbe this can happen on normal edit lists starting on a B-frame.
Signed-off-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '39e16ee2289e4240a82597b97db5541bbbd2b996':
Revert "fate: Skip the checkasm test if CONFIG_STATIC is disabled"
Merged-by: James Almer <jamrial@gmail.com>
Subtract the calculated dts offset from the requested timestamp before
seeking. This fixes an error "Error while filtering: Operation not
permitted" observed with a short file which contains only one key frame
and starts with negative timestamps.
Then, av_index_search_timestamp() returns a valid negative timestamp,
but mov_seek_stream bails out with AVERROR_INVALIDDATA.
Fixes ticket #6139.
Signed-off-by: Jonas Licht <jonas.licht@fem.tu-ilmenau.de>
Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'e00db9f78bb475ed5103364f61892f4e75ef89ba':
checkasm: hevc: Add a hevc_ prefix to the add_residual functions
Merged-by: James Almer <jamrial@gmail.com>
Previously alac encoder was used, from a first glance I thought it is bitexact,
but it turns out it is using floating point arithmetic as well, so probably it
is not. Fixes fate failures on mingw32/64.
Signed-off-by: Marton Balint <cus@passwd.hu>
According to EBU tech 3285 supplement 3 the dwPosPeakOfPeaks field
should contain the absolute position to the maximum audio sample value,
but the current implementation writes the relative peak frame index
instead.
Fix the issue by writing the "unknown" value (-1) for now until the
feature is implemented correctly.
Previous version reviewed-by: Peter Bubestinger <p.bubestinger@av-rd.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
* commit '07a2b155949eb267cdfc7805f42c7b3375f9c7c5':
Bump major versions of all libraries
A few API deprecated ~2 years ago or more are also postponed here for
varying reasons.
FF_API_LOWRES:
Since this functionality depends on AVStream->codec, i figure the two can
be removed at the same time in the next bump or so.
FF_API_AVCTX_TIMEBASE:
Couldn't get this one to work. Not just libavcodec but apparently also
libavformat and ffmpeg.c expect AVCodecContext->time_base to be set for
decoding. Upon removal some tests report a different generic stream time
base (like 1/25), and others lose packet duration values. I guess it's
somehow tied to the AVStream->codec clusterfuck.
It can be dealt with alongside FF_API_LAVF_AVCTX in the next bump.
FF_API_OLD_FILTER_OPTS_ERROR:
This one is meant to remain after FF_API_OLD_FILTER_OPTS is removed.
Its purpose is displaying the corrected command line using the new syntax
as a suggestion as part of the error message.
Merged-by: James Almer <jamrial@gmail.com>
Sets the correct start padding value when an edit list is present.
A new fate test is added, fate-mov-440hz-10ms, to ensure this is
handled correctly.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Reviewed-by: Sasi Inguva <isasi-at-google.com@ffmpeg.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use the appropriate metadata filter for each codec - in the absence of any
options to modify the stream, the output bitstream should be identical to
the input (though the output file may differ in padding).
All tests use conformance bitstreams, the MPEG-2 streams are newly added
from the conformance test streams
<http://standards.iso.org/ittf/PubliclyAvailableStandards/ISO_IEC_13818-4_2004_Conformance_Testing/Video/>
(cherry picked from commit 3cae7f8b9b)
(cherry picked from commit fbd63170bc)
* commit '7cb1d9e2dbbe5bf4652be5d78cdd68e956fa3d63':
build: Fine-grained link-time dependency settings
Also included are bug fix commits 5ff3b5cafc,
d9da7151ee and
5e27ef800b.
Merged-by: James Almer <jamrial@gmail.com>
* commit '4141a5a240fba44b4b4a1c488c279d7dd8a11ec7':
Use modern avconv syntax for codec selection in documentation and tests
Merged-by: James Almer <jamrial@gmail.com>
The first frame changes depending on --enable-memory-poisoning being
used to configure ffmpeg or not, even if requesting bitexact decoding.
Disable the test until this is fixed.
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '8e4d4efc67e154fdffd65964a7cfeef740320827':
fate: Add another SVQ3 test to increase coverage
Also included a fix from da8093f712.
The demuxer option "-ignore_editlist 1 " is temporarily added to the
test as well, to workaround a regression in the edit list mov parsing
code.
Merged-by: James Almer <jamrial@gmail.com>
Correctly set the interlaced_frame and top_field_first fields when pic_struct
indicates paired fields.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Metadata filter output is passed through an Awk script comparing floats
against reference values with specified "fuzz" tolerance to account for
architectural differences (e.g. x86-32 vs. x86-64).
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Use the appropriate metadata filter for each codec - in the absence of any
options to modify the stream, the output bitstream should be identical to
the input (though the output file may differ in padding).
All tests use conformance bitstreams, the MPEG-2 streams are newly added
from the conformance test streams
<http://standards.iso.org/ittf/PubliclyAvailableStandards/ISO_IEC_13818-4_2004_Conformance_Testing/Video/>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Thomas Mundt <tmundt75@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The complex vertical low-pass filter slightly over-sharpens the picture. This becomes visible when several transcodings are cascaded and the error potentises, e.g. some generations of HD->SD SD->HD.
To prevent this behaviour the destination pixel must not exceed the source pixel when the average of the pixels above and below is less than the source pixel. And the other way around.
Tested and approved in a visual transcoding cascade test by video professionals.
SSIM/PSNR test with the first generation of an HD->SD file as a reference against the 6th generation(3 x SD->HD HD->SD):
Results without the patch:
SSIM Y:0.956508 (13.615881) U:0.991601 (20.757750) V:0.993004 (21.551382) All:0.974405 (15.918463)
PSNR y:31.838009 u:48.424280 v:48.962711 average:34.759466 min:31.699297 max:40.857847
Results with the patch:
SSIM Y:0.970051 (15.236232) U:0.991883 (20.905857) V:0.993174 (21.658049) All:0.981290 (17.279202)
PSNR y:34.412108 u:48.504454 v:48.969496 average:37.264644 min:34.310637 max:42.373392
Signed-off-by: Thomas Mundt <tmundt75@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
On ARM platforms, accessing the PMU registers requires special user
access permissions. Since there is no other way to get accurate timers,
the current implementation of timers in FFmpeg rely on these registers.
Unfortunately, enabling user access to these registers on Linux is not
trivial, and generally involve compiling a random and unreliable github
kernel module, or patching somehow your kernel.
Such module is very unlikely to reach the upstream anytime soon. Quoting
Robin Murphin from ARM:
> Say you do give userspace direct access to the PMU; now run two or more
> programs at once that believe they can use the counters for their own
> "minimal-overhead" profiling. Have fun interpreting those results...
>
> And that's not even getting into the implications of scheduling across
> different CPUs, CPUidle, etc. where the PMU state is completely beyond
> userspace's control. In general, the plan to provide userspace with
> something which might happen to just about work in a few corner cases,
> but is meaningless, misleading or downright broken in all others, is to
> never do so.
As a result, the alternative is to use the Performance Monitoring Linux
API which makes use of these registers internally (assuming the PMU of
your ARM board is supported in the kernel, which is definitely not a
given...).
While the Linux API is obviously cross platform, it does have a
significant overhead which needs to be taken into account. As a result,
that mode is only weakly enabled on ARM platforms exclusively.
Note on the non flexibility of the implementation: the timers (native
FFmpeg vs Linux API) are selected at compilation time to prevent the
need of function calls, which would result in a negative impact on the
cycle counters.
Adds another test for asetnsamples filter where padding of the last
frame is switched off. Renames the existing test to make the difference
obvious.
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Makes the handling of unspecified/unknown color_range values on stream
level consistent to the value used on frame level.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
This reverts commit 547db1eaec.
This commit wasn't supposed to be pushed (yet) since it hasn't
been reviewed.
Signed-off-by: Martin Storsjö <martin@martin.st>
When we use dllexport properly for shared libraries on windows,
there's no longer any issue with linking the object files for
e.g. libavcodec statically into checkasm. (It's still not possible
to link the built object files for e.g. libavformat statically to
libavcodec though, since libavformat exepcts to load av_export_*
symbols from a DLL.)
This reverts commit 4e62b57ee0.
Signed-off-by: Martin Storsjö <martin@martin.st>
Adds FATE tests for the previously untested allrgb, allyuv, rgbtestsrc,
smptebars, smptehdbars and yuvtestsrc filters.
Also adds a test for testsrc2 filter with rgb+alpha.
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
The -map option allows for a trailing ? so that an error is not thrown if
the input stream does not exist.
This capability is extended to the map_channel option.
This allows a ffmpeg command not to break if an input channel does not
exist, which can be of use (for instance, scripts processing audio
channels with sources having unset number of audio channels).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When sidx box support is enabled, the code will skip reading all
trun boxes (each containing ctts entries for samples inthat box).
If seeks are attempted before all ctts values are known, the old
code would dump ctts entries into the wrong location. These are
then used to compute pts values which leads to out of order and
incorrectly timestamped packets.
This patch fixes ctts processing by always using the index returned
by av_add_index_entry() as the ctts_data index. When the index gains
new entries old values are reshuffled as appropriate.
This approach makes sense since the mov demuxer is already relying
on the mapping of AVIndex entries to samples for correct demuxing.
As a result of this all ctts entries are now 1-count. A followup
change will be submitted to remove support for > 1 count entries
which will simplify seeking.
Notes for future improvement:
Probably there are other boxes (stts, stsc, etc) that are impacted
by this issue... this patch only attempts to fix ctts since it
completely breaks packet timestamping.
This patch continues using an array for the ctts data, which is not
the most ideal given the rearrangement that needs to happen (via
memmove as new entries are read in). Ideally AVIndex and the ctts
data would be set-type structures so addition is always worst case
O(lg(n)) instead of the O(n^2) that exists now; this slowdown is
noticeable during seeks.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Since there is no information about the source format, "unspecified"
is the correct value to write here.
All tests using the MPEG-2 encoder are updated, as this changes the
header on all outputs.
Fixes filter-pixfmts-scale test failing on big-endian systems due to
alpSrc not being cast to (const int32_t**).
Also fixes distortions in the output alpha channel values by copying the
alpha channel code from the rgba64 case found elsewhere in output.c.
Fixes ticket 6555.
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit switches off forced correct nesting of tags and only keeps
it for font tags. See long explanations in the code for the rationale.
This results in various FATE changes which I'll explain here:
- various swapping in font attributes, this is mostly noise due to the
old reverse stack way of printing them. The new one is more correct as
the last attribute takes over the previous ones.
- unrecognized tags disappears
- invalid tags that were previously displayed aren't anymore (instead,
we have a warning). This is better for the end user
The main benefit of this commit is to be more tolerant to error, leading
to a better handling of badly nested tags or random wrong formatting for
the end user.
This reverts commit 04aa09c4bc
and reintroduces 0ff5567a30 that
was temporarily reverted due to minor regressions.
It also reverts e5bce8b4ce that fixed FATE refs.
The fate-ffm change is caused by field_order now being set
on the output format because the first frame arrives earlier.
The fate-mxf change is assumed to be the same.
The scale2ref filter will now maintain the DAR of the main input and
not the DAR of the reference input. This previous behavior was deemed
counterintuitive for most (all?) use-cases.
Before:
scale2ref=iw/4:ow/mdar
in w:320 h:240 fmt:rgb24 sar:1/1
ref w:640 h:360 fmt:rgb24 sar:1/1
out w:160 h:120 fmt:rgb24 sar:4/3 flags:0x2
SAR: ((120 * 640) / (160 * 360)) * (1 / 1) = 4 / 3
DAR: (160 / 120) * (4 / 3) = 16 / 9
(main out now same DAR as ref)
Now:
scale2ref=iw/4:ow/mdar
in w:320 h:240 fmt:rgb24 sar:1/1
ref w:640 h:360 fmt:rgb24 sar:1/1
out w:160 h:120 fmt:rgb24 sar:1/1 flags:0x2
SAR: ((120 * 320) / (160 * 240)) * (1 / 1) = 1 / 1
DAR: (160 / 120) * (1 / 1) = 4 / 3
(main out same DAR as main in)
The scale2ref FATE test has also been updated.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is actually internal utvideo format.
Allows to make use of SIMD for median prediction for rgb(a) formats,
thus speeding up decoding.
Simplifies code, eases further developement and maintenance.
Update FATE because of pixel format switch.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
<@jamrial> durandal_1707: 04aa09c4bc broke fate-lavf-ffm and fate-lavf-mxf
<@durandal_1707> how so?
<@jamrial> one byte changes
<@durandal_1707> jamrial: just update checksums
<@jamrial> durandal_1707: but why did they change at all? the commit you reverted didn't affect them
<@jamrial> why does reverting it affect these tests?
<@jamrial> i don't think updating the checksum without knowing what changed is a good idea
<@durandal_1707> jamrial: the lavfi core is in weird state after removal of recursive code
<@durandal_1707> jamrial: the change is that older ones would get progressive flag set and new one doesnt
<@jamrial> alright
The md5 protocol has no seek support, but some tests use seeks. This changes
the fate tests to actually create the output files and calculate the md5 on the
written files, which also makes the tests independent of the size of the output
buffers and output buffering in general.
A new md5pipe fate test method is also introduced to keep the old functionality
for tests where using a non-seekable output was intentional, and matroska md5
tests are changed to use that.
Signed-off-by: Marton Balint <cus@passwd.hu>
Meant for DSP functions returning a float or double, as they'd fail if emms
is called after every run on x86_32.
Signed-off-by: James Almer <jamrial@gmail.com>
If the videos starts with B frame, then the minimum composition time
as computed by stts + ctts will be non-zero. Hence we need to shift
the DTS, so that the first pts is zero. This was the intention of that
code-block. However it was subtracting by the wrong amount.
For example, for one of the videos in the bug nonFormatted.mp4 we have
stts:
sample_count duration
960 1001
ctts:
sample_count duration
1 3003
2 0
1 3003
....
The resulting composition times are : 3003, 1001, 2002, 6006, ...
The minimum composition time or PTS is 1001, which should be used to
offset DTS. However the code block was wrongly using ctts[0] which is
3003. Hence the PTS was negative. This change computes the minimum pts
encountered while fixing the index, and then subtracts it from all the
timestamps after the edit list fixes are applied.
Samples files available from:
https://bugs.chromium.org/p/chromium/issues/detail?id=721451https://bugs.chromium.org/p/chromium/issues/detail?id=723537
fate-suite/h264/twofields_packet.mp4 is a similar file starting with 2
B frames. Before this change the PTS of first two B-frames was -6006
and -3003, and I am guessing one of them got dropped when being decoded
and remuxed to the framecrc before, and now it is not being dropped.
Signed-off-by: Sasi Inguva <isasi@google.com>
This test the demuxer discarding non ADTS frames at the beginning and
end of the input.
As a side effect, this commit also enables fate-adts-demux, which was
accidentally disabled in 324f0fbff1.
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This new FATE test for the scale2ref filter makes use of the recently
added scale2ref-specific variables to maintain the aspect ratio of a
test input.
Filtergraph explanation:
[main] has an AR of 4:3. [ref] has an AR of 16:9.
640 / 4 = 160. So the new width for [main] is 160.
160 / ((320 / 240) * (1 / 1)) = 160 / (4 / 3) = 120. So the new
height for [main] is 120.
160 / 120 = 4 / 3 so [main]'s aspect ratio has been maintained while
using [ref]'s width as a reference point.
[ref] is nullsink'd since it is left unchanged by scale2ref (and so
shouldn't need to be tested).
If we were to use "iw/4:-1" in place of "iw/4:ow/mdar":
640 / 4 = 160. So the new width for [main] would be 160.
360 / 4 = 90. So the new height for [main] would be 90.
160 / 90 = 16 / 9 so [main] now has the same aspect ratio as [ref]
which is probably what you do not want.
This is currently the only test for scale2ref.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This removes the current API violating behavior of overwritting the stream's
extradata during packet filtering, something that should not happen after the
av_bsf_init() call.
The bitstream filter generated extradata is no longer available during
write_header(), and as such not usable with non seekable output. The FATE
tests are updated to reflect this.
Signed-off-by: James Almer <jamrial@gmail.com>
Loads from this strictly doesn't require alignment, but specify it
just for consistency with the arm version.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '019ab88a95cb31b698506d90e8ce56695a7f1cc5':
lavc: add an option for exporting cropping information to the caller
Merged-by: James Almer <jamrial@gmail.com>
* commit '4e62b57ee03928c12a3119dcaf78ffa1f4d6985f':
fate: Skip the checkasm test if CONFIG_STATIC is disabled
Merged-by: Clément Bœsch <cboesch@gopro.com>
* commit '5c83b4d550ea42653fece092987bab56ccc32ead':
fate: Unset the sig variable if ignoring a test failure
Merged-by: Clément Bœsch <cboesch@gopro.com>
* commit '11a9320de54759340531177c9f2b1e31e6112cc2':
build: Move build-system-related helper files to a separate subdirectory
"ffbuild" directory name is used instead of "avbuild".
Merged-by: Clément Bœsch <u@pkh.me>
This complex (-1 2 6 2 -1) filter slightly less reduces interlace 'twitter' but better retain detail and subjective sharpness impression compared to the linear (1 2 1) filter.
Signed-off-by: Thomas Mundt <tmundt75@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
the tested sample contain negative value in the red channel
need to be clip to zero, and not set to MAX_RED
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Add an option to webm_dash_manifest demuxer to specify a value for
"bandwidth" field in the DASH manifest. The value is then used by
the muxer. Fixes an existing FIXME in the code.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: James Zern <jzern@google.com>
As it gives excellent encoding gains at an insignificant speed increase
and passes fate without problems, it should now be safe to enable by
default.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This merges commits 8e2ea69135 and
096a8effa3 by Anton Khirnov, with the
following change:
- extract_extradata_check() is added to know if the codec is supported
by the bsf before trying to initialize it. This behaviour is similar to
the old AVCodecParser.split checks.
The FATE reference changes are due to the filtered out NAL units that
the old AVCodecParser.split implementation left alone.
Decoding is unchanged as the functions that parse extradata simply
ignored said unnecessary NAL units.
Signed-off-by: James Almer <jamrial@gmail.com>
* commit 'effc1430b2fe5997d9d55bf28dc507c27125eb27':
Revert "checkasm: vp9dsp: Benchmark the dc-only version of idct_idct separately"
Merged-by: James Almer <jamrial@gmail.com>
* commit '286ab878bd39b56008035638227b3ecb8ec5bbb7':
fate.sh: Allow setting other make flags for running tests
Merged-by: James Almer <jamrial@gmail.com>
* commit '481ff3cf018811ba3235f1c236e970f32a6300b9':
fate: Add h264 and hevc extradata reload tests
Only the HEVC part is merged, see 00c8079816
Merged-by: Clément Bœsch <u@pkh.me>
* commit 'b90c8a3d08e3f9ad4de1253376d2d1d93abb8b8c':
fate: Add tests for mov display matrix
Adapted to use ffprobe -show_entries
Merged-by: James Almer <jamrial@gmail.com>
* commit '043b0b9fb1481053b712d06d2c5b772f1845b72b':
Replace leftover uses of -aframes|-dframes|-vframes with -frames:a|d|v
The merge also includes all our own occurences.
Merged-by: Clément Bœsch <u@pkh.me>
* commit 'c91d6a33f872574c95c8784277cf60ffcf6bff4f':
checkasm: aarch64: Add filler args to make sure all parameters are passed on the stack
Merged-by: James Almer <jamrial@gmail.com>
