Use AVCodecContext.compression_level rather than a private option,
replacing the H.264-specific quality option (which stays only for
compatibility).
This now works with the H.265 encoder in the i965 driver, as well as
the existing cases with the H.264 encoder.
(cherry picked from commit 19388a7200)
This applies a specific fixup to some Bluray streams which contain
redundant PPSs modifying irrelevant parameters of the stream which
confuse other transformations which require correct extradata.
A new single global PPS is created, and all of the redundant PPSs
within the stream are removed.
Black isn't always just memset(ptr, 0, size). Limited YUV in particular
requires relatively non-obvious values, and filling a frame with
repeating 0 bytes is disallowed in some contexts. With component sizes
larger than 8 or packed YUV, this can become relatively complicated. So
having a generic function for this seems helpful.
In order to handle the complex cases in a generic way without destroying
performance, this code attempts to compute a black pixel, and then uses
that value to clear the image data quickly by using a function like
memset.
Common cases like yuv410p10 or rgba can't be handled with a simple
memset, so there is some code to fill memory with 2/4/8 byte patterns.
For the remaining cases, a generic slow fallback is used.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Merged from Libav commit 45df7adc1d.
Use AVCodecContext.compression_level rather than a private option,
replacing the H.264-specific quality option (which stays only for
compatibility).
This now works with the H.265 encoder in the i965 driver, as well as
the existing cases with the H.264 encoder.
Makes behaviour of 805ce25b1d optional, re-enables
HLS key rotation feature
Reviewed-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: DHE <git@dehacked.net>
Works with VAAPI, VDPAU, DXVA2 and D3D11VA.
Signed-off-by: Liu, Kaixuan <kaixuan.liu@intel.com>
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
Black isn't always just memset(ptr, 0, size). Limited YUV in particular
requires relatively non-obvious values, and filling a frame with
repeating 0 bytes is disallowed in some contexts. With component sizes
larger than 8 or packed YUV, this can become relatively complicated. So
having a generic function for this seems helpful.
In order to handle the complex cases in a generic way without destroying
performance, this code attempts to compute a black pixel, and then uses
that value to clear the image data quickly by using a function like
memset.
Common cases like yuv410p10 or rgba can't be handled with a simple
memset, so there is some code to fill memory with 2/4/8 byte patterns.
For the remaining cases, a generic slow fallback is used.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
For the blue and violet noise, I took the pink and brown noise
respectively and subtracted the offsets instead of adding them. When I
eyeball the frequency spectrum of the resulting outputs it looks correct
to me, i.e. the blue graph appears to be a mirror image of the pink, and
the same can be said of the violet and the brown. I did not do anything
else to confirm the correctness.
v2:
- use uint16_t instead of int to store 10-bit ancillary data
- fix ancillary line numbers for 1080p
- some comments and clarifications as requested by Aaron Levinson
Signed-off-by: Marton Balint <cus@passwd.hu>
This also add supports for 4K DeckLink cards because they always output the
ancillary data in 10-bit.
v2:
- only try teletext decoding for 576i PAL mode
- some comments as requested by Aaron Levinson
Signed-off-by: Marton Balint <cus@passwd.hu>
This one changes the previous vmaf patch to libvmaf to keep it separate from the
native implementation of vmaf inside ffmpeg later.
Signed-off-by: Ashish Singh <ashk43712@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Merges Libav commit f9e7a2f95a.
Also adds untested VP9 support.
The check for DXVA2 COBJs is removed. Just update your MinGW to
something newer than a 5 year old release.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
To be used with the new d3d11 hwaccel decode API.
With the new hwaccel API, we don't want surfaces to depend on the
decoder (other than the required dimension and format). The old D3D11VA
pixfmt uses ID3D11VideoDecoderOutputView pointers, which include the
decoder configuration, and thus is incompatible with the new hwaccel
API. This patch introduces AV_PIX_FMT_D3D11, which uses ID3D11Texture2D
and an index. It's simpler and compatible with the new hwaccel API.
The introduced hwcontext supports only the new pixfmt.
Frame upload code untested.
Significantly based on work by Steve Lhomme <robux4@gmail.com>, but with
heavy changes/rewrites.
Merges Libav commit fff90422d1.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
If flushing is not disabled, then mux.c will signal the end of the packets with
an AVIO_DATA_MARKER_FLUSH_POINT, and aviobuf will be able to decide to flush or
not based on the preferred minimum packet size set by the used protocol.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
Takes a raw input stream containing frames with correct timestamps but
possibly out of order and inserts additional show-existing-frame
packets to correct the ordering.
(cherry picked from commit 34e051d168)
(cherry picked from commit b43b95f478)
Also converted from bitstream to get_bits.
NASM is more actively maintained and permits generating dependency information
as a sideeffect of assembling, thus cutting build times in half.
(Cherry-picked from libav commit 57b753b445)
Signed-off-by: James Almer <jamrial@gmail.com>
According to libavfilter/scale.c, if the width and height are both
less than or equal to 0 then the input size is used for both
dimensions. It does not need to be -1. -1:-1 is the same as 0:0 which
is the same as -10:-42, etc.
if (w < 0 && h < 0)
eval_w = eval_h = 0;
The documentation for the zscale filter has also been updated since the
behavior is identical.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Use the flags argument of av_hwframe_ctx_create_derived() to pass the
mapping flags which will be used on allocation. Also, set the format
and hardware context on the allocated frame automatically - the user
should not be required to do this themselves.
(cherry picked from commit c5714b51aa)
This only supports one device globally, but more can be used by
passing them with input streams in hw_frames_ctx or by deriving new
devices inside a filter graph with hwmap.
(cherry picked from commit e669db7610)
Adds functions to convert to/from strings and a function to iterate
over all supported device types. Also adds a new invalid type
AV_HWDEVICE_TYPE_NONE, which acts as a sentinel value.
(cherry picked from commit b7487f4f3c)
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
To be used with the new d3d11 hwaccel decode API.
With the new hwaccel API, we don't want surfaces to depend on the
decoder (other than the required dimension and format). The old D3D11VA
pixfmt uses ID3D11VideoDecoderOutputView pointers, which include the
decoder configuration, and thus is incompatible with the new hwaccel
API. This patch introduces AV_PIX_FMT_D3D11, which uses ID3D11Texture2D
and an index. It's simpler and compatible with the new hwaccel API.
The introduced hwcontext supports only the new pixfmt.
Frame upload code untested.
Significantly based on work by Steve Lhomme <robux4@gmail.com>, but with
heavy changes/rewrites.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
We have floor, ceil, and trunc. Let's add round.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Variables pertaining to the main video are now available when
using the scale2ref filter. This allows, as an example, scaling a
video with another as a reference point while maintaining the
original aspect ratio of the primary/non-reference video.
Consider the following graph: scale2ref=iw/6:-1 [main][ref]
This will scale [main] to 1/6 the width of [ref] while maintaining
the aspect ratio. This works well when the AR of [ref] is equal to
the AR of [main] only. What the above filter really does is
maintain the AR of [ref] when scaling [main]. So in all non-same-AR
situations [main] will appear stretched or compressed to conform to
the same AR of the reference video. Without doing this calculation
externally there is no way to scale in reference to another input
while maintaining AR in libavfilter.
To make this possible, we introduce eight new constants to be used
in the w and h expressions only in the scale2ref filter:
* main_w/main_h: width/height of the main input video
* main_a: aspect ratio of the main input video
* main_sar: sample aspect ratio of the main input video
* main_dar: display aspect ratio of the main input video
* main_hsub/main_vsub: horiz/vert chroma subsample vals of main
* mdar: a shorthand alias of main_dar
Of course, not all of these constants are needed for maintaining the
AR, but adding additional constants in line of what is available for
in/out allows for other scaling possibilities I have not imagined.
So to now scale a video to 1/6 the size of another video using the
width and maintaining its own aspect ratio you can do this:
scale2ref=iw/6:ow/mdar [main][ref]
This is ideal for picture-in-picture configurations where you could
have a square or 4:3 video overlaid on a corner of a larger 16:9
feed all while keeping the scaled video in the corner at its correct
aspect ratio and always the same size relative to the larger video.
I've tried to re-use as much code as possible. I could not find a way
to avoid duplication of the var_names array. It must now be kept in
sync with the other (the normal one and the scale2ref one) for
everything to work which does not seem ideal. For every new variable
introduced/removed into/from the normal scale filter one must be
added/removed to/from the scale2ref version. Suggestions on how to
avoid var_names duplication are welcome.
var_values has been increased to always be large enough for the
additional scale2ref variables. I do not forsee this being a problem
as the names variable will always be the correct size. From my
understanding of av_expr_parse_and_eval it will stop processing
variables when it runs out of names even though there may be
additional (potentially uninitialized) entries in the values array.
The ideal solution here would be using a variable-length array but
that is unsupported in C90.
This patch does not remove any functionality and is strictly a
feature patch. There are no API changes. Behavior does not change for
any previously valid inputs.
The applicable documentation has also been updated.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The library has stopped being developed and Debian has removed it
from its repositories citing security issues.
The native Dirac decoder supports everything the library has and basic
encoding support is still provided via the native vc2 (Dirac Pro, intra
only version of Dirac) encoder. Hence, there's no reason to still support
linking to the library and potentially leading users into security issues.
See http://lists.ffmpeg.org/pipermail/ffmpeg-user/2017-April/035975.html
Parsed_filter_X could remain and user can override it with custom one.
Example:
ffplay -f lavfi "nullsrc=s=640x360,
sendcmd='1 drawtext@top reinit text=Hello; 2 drawtext@bottom reinit text=World',
drawtext@top=x=16:y=16:fontsize=20:fontcolor=Red:text='',
drawtext@bottom=x=16:y=340:fontsize=16:fontcolor=Blue:text=''"
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
This adds tons of code for no other benefit than making VideoToolbox
support conform with the new hwaccel API (using hw_device_ctx and
hw_frames_ctx).
Since VideoToolbox decoding does not actually require the user to
allocate frames, the new code does mostly nothing.
One benefit is that ffmpeg_videotoolbox.c can be dropped once generic
hwaccel support for ffmpeg.c is merged from Libav.
Does not consider VDA or VideoToolbox encoding.
Fun fact: the frame transfer functions are copied from vaapi, as the
mapping makes copying generic boilerplate. Mapping itself is not
exported by the VT code, because I don't know how to test.
add a per-stream option for setting the encoder timebase.
the following values are allowed:
0 - for video, use 1/frame_rate, for audio use 1/sample_rate (this is
the default)
-1 - match the input timebase (when possible)
>0 - set the timebase to provided number
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '019ab88a95cb31b698506d90e8ce56695a7f1cc5':
lavc: add an option for exporting cropping information to the caller
Merged-by: James Almer <jamrial@gmail.com>
It's been addressed.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Reviewed-by: Aaron Levinson <alevinsn@aracnet.com>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit 'e435beb1ea5380a90774dbf51fdc8c941e486551':
crypto: consistently use size_t as type for length parameters
Merged-by: Clément Bœsch <cboesch@gopro.com>
This is a newer API that is intended for decoders like the cuvid
wrapper. Until now, the wrapper required to set an awkward
"incomplete" hw_frames_ctx to set the device. Now the device
can be set directly, and the user can get AV_PIX_FMT_CUDA output
for a specific device simply by setting hw_device_ctx.
This still does a dummy ff_get_format() call at init time, and should
be fully backward compatible.
* commit '11a9320de54759340531177c9f2b1e31e6112cc2':
build: Move build-system-related helper files to a separate subdirectory
"ffbuild" directory name is used instead of "avbuild".
Merged-by: Clément Bœsch <u@pkh.me>
This complex (-1 2 6 2 -1) filter slightly less reduces interlace 'twitter' but better retain detail and subjective sharpness impression compared to the linear (1 2 1) filter.
Signed-off-by: Thomas Mundt <tmundt75@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This makes the currently semi-public avpriv_aac_parse_header() function
private to libavcodec and adds a proper public API function to return
the parts of the ADTS header required in libavformat.
Use the flags argument of av_hwframe_ctx_create_derived() to pass the
mapping flags which will be used on allocation. Also, set the format
and hardware context on the allocated frame automatically - the user
should not be required to do this themselves.
This only supports one device globally, but more can be used by
passing them with input streams in hw_frames_ctx or by deriving new
devices inside a filter graph with hwmap.
* commit 'fa1749dd34c55fb997c97dfc4da9383c9976ab91':
vp9: split superframes in the filtering stage before actual decoding
This commit is a noop.
2017-04-24 20:45:04 @ubitux BBB: btw, do you think you can get the bsf thing this week or we should skip it to give you more time and go on with the merges?
2017-04-24 20:45:20 @BBB I’m not sure I’ll finish it that soon
2017-04-24 20:45:26 @BBB I’d skip it and leave it for later
2017-04-24 20:45:35 @BBB I’ll do it, I promise, but I Can’t guarantee it’ll be done by $date
Merged-by: Clément Bœsch <u@pkh.me>
- Fixed a typo for the -sources argument
Signed-off-by: Mickael Maison <mickael.maison@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Added parameter descriptions for all functions
and converted in-function comments into regular
(non-Doxygen) comments.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
or if x/y go beyond padded area.
This is mostly useful when paired with the aspect option.
Defaults aren't changed.
Idea for this was taken from mpv's soon-to-be-removed expand vf.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
* commit '286ab878bd39b56008035638227b3ecb8ec5bbb7':
fate.sh: Allow setting other make flags for running tests
Merged-by: James Almer <jamrial@gmail.com>
* commit 'f78d360bba6dcfb585847a49a84e89c25950fbdb':
examples/decode_video: use a parser for splitting the input
Merged-by: James Almer <jamrial@gmail.com>
* commit '5f102a9559099429826e84758b8b5182244c52db':
examples/encode_video: switch to the new encoding API
Merged-by: Clément Bœsch <cboesch@gopro.com>
* commit '3d66717f7cb5555257244be8f5bce172ed3af7ac':
examples/decode_audio: use the new audio decoding API
Merged-by: Clément Bœsch <cboesch@gopro.com>
* commit '0946c754d99c05413e813ee515039adcf0f9232a':
examples/decode_audio: use a parser for splitting the input
Merged-by: Clément Bœsch <cboesch@gopro.com>
* commit '0b5a26e8bcd219efe5da3a6d39b588fabf91f2b9': (35 commits)
qdm2: Convert to the new bitstream reader
qcelp: Convert to the new bitstream reader
pcx: Convert to the new bitstream reader
opus: Convert to the new bitstream reader
nellymoser: Convert to the new bitstream reader
jvdec: Convert to the new bitstream reader
hqx: Convert to the new bitstream header
hq_hqa: Convert to the new bitstream reader
gsm: Convert to the new bitstream reader
g72x: Convert to the new bitstream reader
g2meet: Convert to the new bitstream reader
fraps: Convert to the new bitstream reader
flashsv: Convert to the new bitstream reader
faxcompr: Convert to the new bitstream reader
exr: Convert to the new bitstream reader
escape130: Convert to the new bitstream reader
escape124: Convert to the new bitstream reader
dvdsubdec: Convert to the new bitstream reader
dss_sp: Convert to the new bitstream reader
cook: Convert to the new bitstream reader
...
This merge is a noop, see
http://ffmpeg.org/pipermail/ffmpeg-devel/2017-April/209609.html
Merged-by: Clément Bœsch <u@pkh.me>
Takes a raw input stream containing frames with correct timestamps but
possibly out of order and inserts additional show-existing-frame
packets to correct the ordering.
This is an example, people will copy and use this. The maximum supported is quite
unreasonable as a default choice
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
