The max height is currently documented as 16; the max difference per
pixel is 255, and a .8h element can easily contain 16*255, thus keep
accumulating in two .8h vectors, and just do the final accumulationat the
end. This should work for heights up to 256.
This requires a minor register renumbering in ff_pix_abs16_xy2_neon.
Before: Cortex A53 A72 A73 Graviton 3
pix_abs_0_0_neon: 97.7 47.0 37.5 22.7
pix_abs_0_1_neon: 154.0 59.0 52.0 25.0
pix_abs_0_3_neon: 179.7 96.7 87.5 41.2
After:
pix_abs_0_0_neon: 96.0 39.2 31.2 22.0
pix_abs_0_1_neon: 150.7 59.7 46.2 23.7
pix_abs_0_3_neon: 175.7 83.7 81.7 38.2
Signed-off-by: Martin Storsjö <martin@martin.st>
Using absolute-difference-accumulate does use twice the amount of
absolute-difference instructions, but avoids the need for the
uaddl and add instructions, reducing the total number of instructions
by 3.
These can be interleaved in the rest of the calculation, to avoid
tight dependencies at the end. Unfortunately, this is marginally
slower on Cortex A53, but faster on A72 and A73.
Before: Cortex A53 A72 A73 Graviton 3
pix_abs_0_3_neon: 175.7 109.2 92.0 41.2
After:
pix_abs_0_3_neon: 179.7 96.7 87.5 41.2
Signed-off-by: Martin Storsjö <martin@martin.st>
Provide neon implementation for pix_abs16_x2 function.
Performance tests of implementation are below.
- pix_abs_0_1_c: 283.5
- pix_abs_0_1_neon: 39.0
Benchmarks and tests run with checkasm tool on AWS Graviton 3.
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
- ff_pix_abs16_neon
- ff_pix_abs16_xy2_neon
In direct micro benchmarks of these ff functions verses their C implementations,
these functions performed as follows on AWS Graviton 3.
ff_pix_abs16_neon:
pix_abs_0_0_c: 141.1
pix_abs_0_0_neon: 19.6
ff_pix_abs16_xy2_neon:
pix_abs_0_3_c: 269.1
pix_abs_0_3_neon: 39.3
Tested with:
./tests/checkasm/checkasm --test=motion --bench --disable-linux-perf
Signed-off-by: Jonathan Swinney <jswinney@amazon.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
The SAO band filter can be called with non-multiples of 8, we round up
to the nearest multiple of 8 to account for this.
Signed-off-by: J. Dekker <jdek@itanimul.li>
This patch fixes a wrong type of BTI landing pad when branching to
functions instantiated via the fft*_neon macro.
Although the previously employed paciasp instruction serves as a landing
pad, for the ways that this function is invoked it is the wrong type, resulting
in an unexpected termination of the running process.
Signed-off-by: André Kempe <andre.kempe@arm.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
checkasm benchmarks on 1.5 GHz Cortex-A72 are as follows.
vc1dsp.vc1_unescape_buffer_c: 655617.7
vc1dsp.vc1_unescape_buffer_neon: 118237.0
Signed-off-by: Ben Avison <bavison@riscosopen.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
checkasm benchmarks on 1.5 GHz Cortex-A72 are as follows. Note that the C
version can still outperform the NEON version in specific cases. The balance
between different code paths is stream-dependent, but in practice the best
case happens about 5% of the time, the worst case happens about 40% of the
time, and the complexity of the remaining cases fall somewhere in between.
Therefore, taking the average of the best and worst case timings is
probably a conservative estimate of the degree by which the NEON code
improves performance.
vc1dsp.vc1_h_loop_filter4_bestcase_c: 10.7
vc1dsp.vc1_h_loop_filter4_bestcase_neon: 43.5
vc1dsp.vc1_h_loop_filter4_worstcase_c: 184.5
vc1dsp.vc1_h_loop_filter4_worstcase_neon: 73.7
vc1dsp.vc1_h_loop_filter8_bestcase_c: 31.2
vc1dsp.vc1_h_loop_filter8_bestcase_neon: 62.2
vc1dsp.vc1_h_loop_filter8_worstcase_c: 358.2
vc1dsp.vc1_h_loop_filter8_worstcase_neon: 88.2
vc1dsp.vc1_h_loop_filter16_bestcase_c: 51.0
vc1dsp.vc1_h_loop_filter16_bestcase_neon: 107.7
vc1dsp.vc1_h_loop_filter16_worstcase_c: 722.7
vc1dsp.vc1_h_loop_filter16_worstcase_neon: 140.5
vc1dsp.vc1_v_loop_filter4_bestcase_c: 9.7
vc1dsp.vc1_v_loop_filter4_bestcase_neon: 43.0
vc1dsp.vc1_v_loop_filter4_worstcase_c: 178.7
vc1dsp.vc1_v_loop_filter4_worstcase_neon: 69.0
vc1dsp.vc1_v_loop_filter8_bestcase_c: 30.2
vc1dsp.vc1_v_loop_filter8_bestcase_neon: 50.7
vc1dsp.vc1_v_loop_filter8_worstcase_c: 353.0
vc1dsp.vc1_v_loop_filter8_worstcase_neon: 69.2
vc1dsp.vc1_v_loop_filter16_bestcase_c: 60.0
vc1dsp.vc1_v_loop_filter16_bestcase_neon: 90.0
vc1dsp.vc1_v_loop_filter16_worstcase_c: 714.2
vc1dsp.vc1_v_loop_filter16_worstcase_neon: 97.2
Signed-off-by: Ben Avison <bavison@riscosopen.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids unnecessary rebuilds of most source files if only the
list of enabled components has changed, but not the other properties
of the build, set in config.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
This patch adds optional support for Arm Pointer Authentication Codes.
PAC support is turned on or off at compile time using additional
compiler flags. Unless any of these is enabled explicitly, no additional
code will be emitted at all.
Signed-off-by: André Kempe <andre.kempe@arm.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
While this function on its own passes all of fate-hevc, there's
indications that the function might need to handle widths that
aren't a multiple of 8 (noted in commit
f63f9be37c, which later was
reverted).
Signed-off-by: Martin Storsjö <martin@martin.st>
Add Branch Target Identifiers (BTIs) to all functions defined in
AArch64 assembly files. Most of the BTI landing pads are added
automatically by the 'function' macro.
BTI support is turned on or off at compile time based on the presence
of the __ARM_FEATURE_BTI_DEFAULT feature macro.
A binary compiled with BTI support can be executed on an Armv8-A
processor without BTI support because the instructions are defined in
NOP space.
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>
Signed-off-by: Elijah Ahmad <elijah.ahmad@arm.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Change AArch64 assembly code to use:
ret x<n>
instead of:
br x<n>
"ret x<n>" is already used in a lot of places so this patch makes it
consistent across the code base. This does not change behavior or
performance.
In addition, this change reduces the number of landing pads needed in
a subsequent patch to support the Armv8.5-A Branch Target
Identification (BTI) security feature.
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Don't use the loaded registers directly, avoiding stalls on in
order cores. Use vrhadd.u8 with q registers where easily possible.
Signed-off-by: Martin Storsjö <martin@martin.st>
transpose_4x8H was declared in vp9lpf_16bpp_neon, however this macro is
not unique to vp9 and could be used elsewhere.
Signed-off-by: Mikhail Nitenko <mnitenko@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
These became unnecessary when the stride arguments were changed from
int to ptrdiff_t in bc26fe8927
(0576ef466d) and
d5d699ab6e
(aa844dc46f).
Signed-off-by: Martin Storsjö <martin@martin.st>
This is marginally slower, but correct for all input values.
The previous implementation failed with certain input seeds, e.g.
"checkasm --test=hevc_idct 98".
Signed-off-by: Martin Storsjö <martin@martin.st>
Deprecated in commits 7fc329e2dd
and 31f6a4b4b8.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Some files currently rely on libavutil/cpu.h to include it for them;
yet said file won't use include it any more after the currently
deprecated functions are removed, so include attributes.h directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Move the loop counter decrement further from the branch instruction,
this hides the latency of the decrement.
In loops that first load, then store (the horizontal prediction cases),
do the decrement after the load (where the next instruction would
stall a bit anyway, waiting for the result of the load).
In loops that store twice using the same destination register,
also do the decrement between the two stores (as the second store
would need to wait for the updated destination register from the
first instruction).
In loops that store twice to two different destination registers,
do the decrement before both stores, to do it as soon before the
branch as possible.
This gives minor (1-2 cycle) speedups in most cases (modulo measurement
noise), but the horizontal prediction functions get a rather notable
speedup on the Cortex A53.
Before: Cortex A53 A72 A73
pred8x8_dc_8_neon: 60.7 46.2 39.2
pred8x8_dc_128_8_neon: 30.7 18.0 14.0
pred8x8_horizontal_8_neon: 42.2 29.2 18.5
pred8x8_left_dc_8_neon: 52.7 36.2 32.2
pred8x8_mad_cow_dc_0l0_8_neon: 48.2 27.7 25.7
pred8x8_mad_cow_dc_0lt_8_neon: 52.5 33.2 34.7
pred8x8_mad_cow_dc_l0t_8_neon: 52.5 31.7 33.2
pred8x8_mad_cow_dc_l00_8_neon: 43.2 27.0 25.5
pred8x8_plane_8_neon: 112.2 86.2 88.2
pred8x8_top_dc_8_neon: 40.7 23.0 21.2
pred8x8_vertical_8_neon: 27.2 15.5 14.0
pred16x16_dc_8_neon: 91.0 73.2 70.5
pred16x16_dc_128_8_neon: 43.0 34.7 30.7
pred16x16_horizontal_8_neon: 86.0 49.7 44.7
pred16x16_left_dc_8_neon: 87.0 67.2 67.5
pred16x16_plane_8_neon: 236.0 175.7 173.0
pred16x16_top_dc_8_neon: 53.2 39.0 41.7
pred16x16_vertical_8_neon: 41.7 29.7 31.0
After:
pred8x8_dc_8_neon: 59.0 46.7 42.5
pred8x8_dc_128_8_neon: 28.2 18.0 14.0
pred8x8_horizontal_8_neon: 34.2 29.2 18.5
pred8x8_left_dc_8_neon: 51.0 38.2 32.7
pred8x8_mad_cow_dc_0l0_8_neon: 46.7 28.2 26.2
pred8x8_mad_cow_dc_0lt_8_neon: 55.2 33.7 37.5
pred8x8_mad_cow_dc_l0t_8_neon: 51.2 31.7 37.2
pred8x8_mad_cow_dc_l00_8_neon: 41.7 27.5 26.0
pred8x8_plane_8_neon: 111.5 86.5 89.5
pred8x8_top_dc_8_neon: 39.0 23.2 21.0
pred8x8_vertical_8_neon: 27.2 16.0 14.0
pred16x16_dc_8_neon: 85.0 70.2 70.5
pred16x16_dc_128_8_neon: 42.0 30.0 30.7
pred16x16_horizontal_8_neon: 66.5 49.5 42.5
pred16x16_left_dc_8_neon: 81.0 66.5 67.5
pred16x16_plane_8_neon: 235.0 175.7 173.0
pred16x16_top_dc_8_neon: 52.0 39.0 41.7
pred16x16_vertical_8_neon: 40.2 33.2 31.0
Despite this, a number of these functions still are slower than
what e.g. GCC 7 generates - this shows the relative speedup of the
neon codepaths over the compiler generated ones:
Cortex A53 A72 A73
pred8x8_dc_8_neon: 0.86 0.65 1.04
pred8x8_dc_128_8_neon: 0.59 0.44 0.62
pred8x8_horizontal_8_neon: 1.51 0.58 1.30
pred8x8_left_dc_8_neon: 0.72 0.56 0.89
pred8x8_mad_cow_dc_0l0_8_neon: 0.93 0.93 1.37
pred8x8_mad_cow_dc_0lt_8_neon: 1.37 1.41 1.68
pred8x8_mad_cow_dc_l0t_8_neon: 1.21 1.17 1.32
pred8x8_mad_cow_dc_l00_8_neon: 1.24 1.19 1.60
pred8x8_plane_8_neon: 3.36 3.58 3.76
pred8x8_top_dc_8_neon: 0.97 0.99 1.43
pred8x8_vertical_8_neon: 0.86 0.78 1.18
pred16x16_dc_8_neon: 1.20 1.06 1.49
pred16x16_dc_128_8_neon: 0.83 0.95 0.99
pred16x16_horizontal_8_neon: 1.78 0.96 1.59
pred16x16_left_dc_8_neon: 1.06 0.96 1.32
pred16x16_plane_8_neon: 5.78 6.49 7.19
pred16x16_top_dc_8_neon: 1.48 1.53 1.94
pred16x16_vertical_8_neon: 1.39 1.34 1.98
In particular, on Cortex A72, many of these functions are slower
than the compiler generated code, while they're more beneficial on
e.g. the Cortex A73.
Signed-off-by: Martin Storsjö <martin@martin.st>
