* qatar/master:
x86: ac3dsp: Remove 3dnow version of ff_ac3_extract_exponents
Conflicts:
tests/fate/ac3.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The function requires increasing the fuzz factor for the ac3/eac3 encode
tests and even so makes fate fail. It only provides a slight encoding
speedup for legacy CPUs that do not support SS2. Thus its benefit is not
worth the trouble it creates and fixing it would be a waste of time.
Most formats do not support negative timestamps, shift them to avoid
unexpected behaviour and a number of bad crashes.
CC:libav-stable@libav.org
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The sample is already included in the FATE suite, but is not tested
because cropping wasn't fully supported before.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
avcodec: Bump minor for JPEG 2000 decoder
JPEG 2000 decoder for DCinema
The mqc code is merged, the rest is added independent of
the existing jpeg2000 decoder and encoder.
Conflicts:
Changelog
doc/general.texi
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/mqc.c
libavcodec/mqc.h
libavcodec/mqcdec.c
libavcodec/version.h
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Based on the 2007 GSoC project from Kamil Nowosad <k.nowosad@students.mimuw.edu.pl>
Updated to current programming standards, style and many more small
fixes by Diego Biurrun <diego@biurrun.de>.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* commit '9bfc6e02bae9de354fb9ba09a8a140e83eeadf7d':
afifo: fix request_samples on the last frame in certain cases
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The current code can fail to return the last frame if it contains
exactly the requested number of samples.
Fixes the join filter test, which previously did not include the last
408 samples in most cases.
CC:libav-stable@libav.org
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
fate: cosmetics: More sensible order for entries in video filter file
Conflicts:
tests/fate/filter-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a77aed142cade3beb0cd43f879d4f47daae23b8a':
fate: Rename video filters file and add separate video filters target
Conflicts:
tests/fate/filter-video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b357f1d1d3dd1d6672df6a397a31be425d31b6d1':
fate: Split audio filters into their own separate file
Conflicts:
tests/Makefile
tests/fate/filter.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
To define accurately the delay between two frames, it is necessary to
have both available. Before this commit, the first frame had a delay of
0; while in practice the problem is not visible in most situation, it is
problematic with low frame rate and large scene change.
This commit notably fixes output generated with commands such as:
ffmpeg -i big_buck_bunny_1080p_h264.mov
-vf "select='gt(scene,0.4)',scale=320:-1,setpts=N/TB"
-frames:v 5 -y out.gif
Also, to avoid odd loop delays, the N-1 delay is duplicated for the last
frame.
The encoder now doesn't produce any extra graphic control extension
block anymore. Only the image is encoded, and the muxer writing
its own GCE containing notably the timing information now includes the
optional palette transmitted through packet side data.
This commit avoid setting clashes between the two GCE, and reduce the
size of the generated file with pal8 output.
This commit removes the badly duplicated code between the encoder and
the muxer. That may sound surprising, but the encoder is now responsible
from the encoding of the picture when muxing to a .gif file. It also
does not require anymore a manual user intervention such as a -pix_fmt
rgb24 to work properly. To summarize, output gif are now easier to
generate, code is saner and simpler, and files are smaller (thanks to
the lzw encoding which was unused so far with the default .gif output).
We can certainly make things even better, but this is the first step.
FATE is updated because of the output being produced by the encoder and
not the muxer (no lzw in the muxer), and in the seek test only the size
mismatches.
Fixes Ticket #2262
* qatar/master:
FATE: add a test for the interlace filter
lavfi: new interlace filter
Conflicts:
Changelog
configure
doc/filters.texi
libavfilter/Makefile
libavfilter/allfilters.c
tests/fate/filter.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Using the first names of authors sounds somewhat unprofessional
and might be considered offensive which is not intended.
The new names use the initials of the authors due to simplicity
and the possibility to apply it consistently without the need
to find political correct names for each future case where
alternative codecs might exist. Also its shorter ...
If someone has a better idea, like maybe 2 random letters
and people prefer it then iam happy to switch to that ...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Text subtitles packets are not 0-terminated (and if they are,
it is handled by the recoding process since 0 is a valid
Unicode code point). The terminating 0 would overwrite the
last payload octet.
OTOH, packets must be 0-padded.
Fix a problem reported in trac ticket #2431.
The gcov/lcov are a common toolchain for visualizing code coverage with
the GNU/Toolchain. The documentation and implementation of this
integration was heavily inspired from the blog entry by Mike Melanson:
http://multimedia.cx/eggs/using-lcov-with-ffmpeg/
* qatar/master:
fate: add an option to generate the references
Conflicts:
doc/fate.texi
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vmdav: convert to bytestream2
FATE: add a test for the join filter
FATE: add a test for the volume filter
Conflicts:
libavcodec/vmdav.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '43a8333a16c796b3d855fb3aaa742103cb62731f':
FATE: add a test for the channelsplit filter
FATE: add a test for the channelmap filter
FATE: add a test for the negate filter
FATE: add a test for the overlay filter
Conflicts:
tests/fate/filter.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ea290d919a52f0f8c7e30d69328bb011ed13f61a':
FATE: add a test for the setpts filter
FATE: add a test for the hqdn3d filter
FATE: add a test for the transpose filter
FATE: add a test for the unsharp filter
Conflicts:
tests/ref/fate/filter-hqdn3d
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1a6d4bd7b60761bd7d955011ce7df4dd6b87b497':
FATE: add a test for the fade filter
FATE: add a test for the drawbox filter
FATE: add a test for the boxblur filter
FATE: add a test for the gradfun filter
Conflicts:
tests/fate/filter.mak
tests/ref/fate/filter-gradfun
our gradfun test is renamed to gradfun-ubitux as its name conflicts and
it was requested to be kept. Feel free to rename, change, finetune ...
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '1ae44c87c924b69a0657256fbaa8ad140df2f27c':
lavfi/gradfun: remove rounding to match C and SSE code.
lavfi/gradfun: fix dithering in MMX code.
lavfi/gradfun: fix rounding in MMX code.
lavfi/gradfun: do not increment DC pointer for odd values.
fate: filter: Add dependencies
avconv: add options for reading filtergraphs from a file.
Conflicts:
Changelog
doc/ffmpeg.texi
doc/filters.texi
ffmpeg.h
ffmpeg_opt.c
libavfilter/vf_gradfun.c
tests/fate/filter.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Except for the vintage preset, the values are defined by Lou Logan based
on the ones found in Adobe Photoshop CS6.
Signed-off-by: Clément Bœsch <ubitux@gmail.com>
Signed-off-by: Lou Logan <lou@lrcd.com>
The partial frames leak a few uninitialized pixels through
due to incomplete interlaced error concealment support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '666fe5da47d127074be7f0e2bac93db6af8b4a30':
atomic: Exclude the unsupported implementation headers from checkheaders
avconv: do not silently ignore unused codec AVOptions.
Conflicts:
ffmpeg_opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6deae8e0530a885b76f149841ed4899cb438ec23':
FATE: remove the -dct option from some decoding tests.
avconv: use a local variable for InputFile in open_input_file().
Conflicts:
tests/fate/microsoft.mak
tests/fate/real.mak
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3e2f200237af977b9253b0aff121eee27bcedb44':
roqvideodec: fix a potential infinite loop in roqvideo_decode_frame().
xxan: fix invalid memory access in xan_decode_frame_type0()
tty: set avg_frame_rate.
FATE: enable multiple slices in the ffv1 vsynth test
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2eba9087f3031c6050f8dcd996225490be6c2410':
lavc: make up a fake frame channel layout when there is no real one.
Conflicts:
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '65f1d45dcc71186ede72fff950996099d23359bd':
lavu: add support for atomic operations.
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
These could be used for reference counting, or for keeping track of
decoding progress in references in multithreaded decoders.
Support is provided by gcc/msvc/suncc intrinsics, with a fallback using
pthread mutexes.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
When parsing the Xing/Info tag, don't set the bit rate if it's an Info tag.
When parsing the stream, don't override the bit rate if it's already set,
otherwise calculate the mean bit rate from parsed frames. This way, the bit
rate will be set correctly both for CBR and VBR streams.
Signed-off-by: Alexander Kojevnikov <alexander@kojevnikov.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '813b82b927b19532e3bc3397b972c8a27b9f6326':
configure: Fix silly typo in logging command of check_struct()
fate: remove last incomplete frame from mpeg2-field-enc test
Conflicts:
tests/fate/video.mak
tests/ref/fate/mpeg2-field-enc
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavf: Add a fate test for the noproxy pattern matching
lavf: Handle the environment variable no_proxy more properly
Conflicts:
libavformat/Makefile
libavformat/internal.h
libavformat/tls.c
libavformat/utils.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The new code is also faster and more robust.
As for the performance:
old decoder + conversion to rgb: fps = 2618
old decoder, without converting to rgb: fps = 4012
new decoder, producing rgb: fps = 4502
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Other software does not store it in this case, and the information
is provided by the codec stream
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The QuickTime specification does not contain any hint that the atom
must not be written in some cases and both the QuickTime and the
AVID decoders do not fail if the atom is present.
This change allows to signal (visually) interlaced streams with
a codec different from uncompressed video.
As a side-effect, this fixes ticket #2202
Matroska specification lists support for BlockAdditional element
which is not supported by ffmpeg's matroska parser. This patch
adds grammar definitions for parsing that element (and few other
related elements) and then puts the data in AVPacket.side_data
with new AVPacketSideDataType AV_PKT_DATA_MATROSKA_BLOCKADDITIONAL.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts parts of d6d5ef5534, that didn't work right. (The
tests that were added failed on big endian, and the output looked
garbled on little endian as well.)
This is due to the fact that the intermediate scaling values (from
e.g. hScale8To19_c or hScale16To19_c) are stored as int32_t and
thus requires a separate output function, while yuv2gbrp_full_X_c
only interprets it as int16_t.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '81726a4f0b8a43e19898e2a36fdde80583bafff0':
FATE: add tests for additional flavors of asf cover art
asfdec: do not assume every AVStream has a corresponding ASFStream
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This replaces a large number of checks for the second field by
fixing the pointers when they are setup
This should also fix I/BI field pictures
Changes checksums for vc1_sa10143, the file becomes slightly closer
to what the reference decoder outputs
Based on "vc1dec: the second field is written wrong to the picture"
by Sebastian Sandberg <sebastiand.sandberg@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dff6197dfb9b2d145729885c63f865c5fdd184aa':
nuv: do not rely on get_buffer() initializing the frame.
yop: initialize palette to 0
Conflicts:
libavcodec/nuv.c
tests/ref/fate/nuv-rtjpeg-fh
tests/ref/fate/yop
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2cd4068071b9a8908823a3107f97e938211045ce':
fraps: fix off-by one bug for version 1.
Conflicts:
libavcodec/fraps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '238614de679a71970c20d7c3fee08a322967ec40':
cdgraphics: do not rely on get_buffer() initializing the frame.
svq1: replace struct svq1_frame_size with an array.
vf_yadif: silence a warning.
Conflicts:
libavcodec/svq1dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The FATE sample contains some pixels with value 0, but the palette
stored in the file contains only values from 16 up. Because the default
and cmdutils get_buffer() initialize the data to 0x80, they appear as
gray dots.
After this commit they change to black dots, which is probably still
incorrect but less visible and doesn't rely on get_buffer() initializing
the data.
We have to make some symetric changes elsewhere as this increases
the precission with which samples are stored.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '69c25c9284645cf5189af2ede42d6f53828f3b45':
dnxhdenc: fix invalid reads in dnxhd_mb_var_thread().
x86: h264qpel: Move stray comment to the right spot and clarify it
atrac3: use correct loop variable in add_tonal_components()
Conflicts:
tests/ref/vsynth/vsynth1-dnxhd-1080i
tests/ref/vsynth/vsynth2-dnxhd-1080i
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ce378f0dd0c4e5350b3280e6b3e8d6b46fe4b0a3':
fate: Use wmv2 IDCT for wmv2 tests
vorbisdsp: change block_size type from int to intptr_t.
Conflicts:
tests/fate-run.sh
tests/fate/vcodec.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e6bc38fd49c94726b45d5d5cc2b756ad8ec49ee0':
wmv2: move IDCT to its own DSP context.
Conflicts:
libavcodec/dsputil.h
tests/ref/seek/vsynth2-wmv2
tests/ref/vsynth/vsynth1-wmv2
tests/ref/vsynth/vsynth2-wmv2
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8a4f26206d7914eaf2903954ce97cb7686933382':
dsputil: remove butterflies_float_interleave.
srtp: Move a variable to a local scope
srtp: Add tests for the crypto suite with 32/80 bit HMAC
Conflicts:
libavcodec/x86/dsputil.asm
libavcodec/x86/dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use a noise range of -0.707 to 0.707 instead of -0.5 to 0.5
Based on patch by: Mathias Rauen <madshi@gmail.com> and commit by Justin Ruggles (04ea5491)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows us to remove FF_IDCT_WMV2, which serves no practical purpose
other than to be able to select the WMV2 IDCT for MPEG (or vice versa)
and get corrupt output.
Fate tests for all wmv2-related tests change, because (for some obscure
reason) they forced use of the MPEG IDCT. You would get the same changes
previously by not using -idct simple in the fate test (or replacing it
with -idct auto).
* commit '0eecafc948b74c247ebbc59f18f508db5d590d0b':
configure: Make the new srtp protocol depend on the rtp protocol
lavf: Add a fate test for the SRTP functions
lavu: Add a fate test for the HMAC API
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'abae27ed3acd0a7c54f11760c5be2d2653c4edf8':
rtpdec: Fix the calculation of expected number of packets
fate: vp3: Fix fate-vp3-coeff-level64 test dependencies
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d3b144c5ea824193019019d33740a1ae9e0bb69':
fate: cosmetics: Order some test entries
Conflicts:
tests/fate/lossless-video.mak
tests/fate/microsoft.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ec86ba57312745fd7ad9771e3121e79c6aacba30':
vp3: Fix double free in vp3_decode_end()
fate: Split fate-siff test into demuxer and VB video decoder test
Conflicts:
tests/fate/demux.mak
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add some additional checks for EOF and print error messages on an incomplete
header or packet.
FATE reference updated for id-cin-video due to the demuxer no longer
returning a partial video packet at EOF.
The filter has been added recently and does not yet pass tests on all platforms.
It should not be included in the tests in the release until it works.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The filter has been added recently and does not yet pass tests on all platforms.
It should not be included in the tests in the release until it works.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is a port of virtual dub's histogram equalization filter by Donald
A. Graft. Based on the work by Jérémy Tran <tran.jeremy.av@gmail.com>,
done for SOCIS 2012.
This is a port of the kerndeint filter (libmpcodecs/vf_kerndeint) by
Donal A. Graft (original avisynth plugin author), and is based on the
work by Jérémy Tran <tran.jeremy.av@gmail.com> done for SOCIS 2012.
Force commands to specify the name of the test to run. This simplifies
extending the function with a new parameter, which will be done in a
following patch.
After making some blind tests on a small collection of music
samples for home usage. It turned out that the default cutoff
was too low.
The impact of filter_size was not clearly distinguishable (the
results were on the edge) with the music samples but turned out
to be clearly audible in some synthetic samples.
Thanks to Daniel for helping out with the listening tests.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Some of the filters tests use globbing characters, especially
brackets for filter pad labels. While most of these strings
are way too complicated to ever match an existing file name
and are therefore kept unchanged in the command line (an old
misfeature of the shell language that happens to be convenient
here), at least one use is simple enough to match random files
lying in the current directory. If that happens, the string,
that was meant to be kept verbatim, is replaced by the file
name, and that causes the test to fail (or worse).
The data does not contain timing or trailing line breaks anymore. In
addition to being less idiotic, it is consistent with other codecs and
thus allows more switches between formats and codecs. It also fixes the
issue of the trailing line returns being simple \n instead of CRLF in
the ASS rectangle dialogue (this is the reason of the FATE update).
* commit '5e6ee38bd3cef0dd05f1dd7977c71f3479eb6d01':
FATE: add cavs test
cavsdec: export picture type in the output frame
Conflicts:
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Current MicroDVD AVPackets contain timing information and trailing line
breaks. The data is now only composed of the markup data. Doing this
consistently between text subtitles decoders allows to use different
codec for various formats. For instance, MicroDVD markup is sometimes
found in some VPlayer files. Also, generally speaking, the subtitles
text decoders have no use of these timings (and they must not use them
since it would break any user timing adjustment).
Technically, this is a major ABI break. In practice, a mismatching
lavf/lavc will now error out for MicroDVD decoding. Supporting both
formats requires unnecessary complex and fragile code.
FATE needs update because line breaks in the ASS file were "\n" (because
that's what is used in the original file). ASS format expect "\r\n" line
breaks; this commit fixes this issue. Also note that this "\r\n"
trailing need to be moved at some point from the decoders to the ASS
muxer.
