* qatar/master:
avconv: fix a segfault on -c copy with -filter_complex.
isom: Support more DTS codec identifiers.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
matroska: Clear prev_pkt between seeks.
avutil: change default buffer size alignment for sample buffer functions
audemux: Add a sanity check for the number of channels
Remove libdirac decoder.
matroska: Add incremental parsing of clusters.
avconv: fix off by one check in complex_filter
mpegts: Try seeking back even for nonseekable protocols
swscale: K&R formatting cosmetics (part III)
Conflicts:
configure
doc/general.texi
doc/platform.texi
ffmpeg.c
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/libdirac.h
libavcodec/libdiracdec.c
libavformat/au.c
libavformat/mpegts.c
libswscale/input.c
tests/ref/seek/lavf_mkv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The new incremental parser doesn't always clear prev_pkt,
however the packet queue is cleared when seeking. Which leads
to a use-after-free.
Verified using Valgrind.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Reduces the amount of upfront data required for cluster parsing
thus decreasing latency on seek and startup.
The change in the seek-lavf_mkv FATE test is due to incremental
parsing no longer reading as much data as the old parser and
thus not having that additional data to generate index entries
based on keyframes. Index entries are added correctly as the
file is parsed.
All FATE tests pass and Chrome has been using this patch for ~6
months without issue.
Currently incremental parsing is not supported for files with
SSA tracks since they require merging packets between clusters.
In this case the code falls back to non-incremental parsing.
Signed-off-by: Aaron Colwell <acolwell@chromium.org>
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The mpegts demuxer reads 5 KB at startup just for discovering
the packet size. Since the default avio buffer size is 32 KB,
the seek back to the start will in most cases be within the
avio buffer, and will in most cases succeed even if the actual
protocol isn't seekable.
This makes the demuxer startup faster/with less data when
reading data from a non-seekable input, by not skipping
the first few KB.
If it fails, don't warn if the protocol isn't seekable, making
it behave as before in the failure case.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
ARM: allow runtime masking of CPU features
dsputil: remove unused functions
mov: Treat keyframe indexes as 1-origin if starting at non-zero.
mov: Take stps entries into consideration also about key_off.
Remove lowres video decoding
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/arm/vp8dsp_init_arm.c
libavcodec/libopenjpegdec.c
libavcodec/mjpegdec.c
libavcodec/mpegvideo.c
libavcodec/utils.c
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes a null ptr dereference with attachments
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avcodec: remove AVCodecContext.dsp_mask
avconv: fix a segfault when default encoder for a format doesn't exist.
utvideo: general cosmetics
aac: Handle HE-AACv2 when sniffing a channel order.
movenc: Support high sample rates in isomedia formats by setting the sample rate field in stsd to 0.
xxan: Remove write-only variable in xan_decode_frame_type0().
ivi_common: Initialize a variable at declaration in ff_ivi_decode_blocks().
Conflicts:
ffmpeg.c
libavcodec/utvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avcodec: add a cook parser to get subpacket duration
FATE: allow lavf tests to alter input parameters
FATE: replace the acodec-pcm_s24daud test with an enc_dec_pcm checksum test
FATE: replace the acodec-g726 test with 4 new encode/decode tests
FATE: replace current g722 encoding tests with an encode/decode test
FATE: add a pattern rule for generating asynth wav files
FATE: optionally write a WAVE header in audiogen
avutil: add audio fifo buffer
Conflicts:
doc/APIchanges
libavcodec/version.h
libavutil/avutil.h
tests/Makefile
tests/codec-regression.sh
tests/fate/voice.mak
tests/lavf-regression.sh
tests/ref/acodec/g722
tests/ref/acodec/g726
tests/ref/acodec/pcm_s24daud
tests/ref/lavf/dv_fmt
tests/ref/lavf/gxf
tests/ref/lavf/mxf
tests/ref/lavf/mxf_d10
tests/ref/seek/lavf_dv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
dv: Initialize encoder tables during encoder init.
dv: Replace some magic numbers by the appropriate #define.
FATE: pass the decoded output format and audio source file to enc_dec_pcm
FATE: specify the input format when decoding in enc_dec_pcm()
x86inc: support AVX abstraction for 2-operand instructions
configure: detect PGI compiler and set suitable flags
avconv: check for an incompatible changing channel layout
avio: make AVIOContext.av_class pointer to const
nutdec: add malloc check and fix const to non-const conversion warnings
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fix this warning:
libavformat/aviobuf.c:663:20: warning: assignment discards qualifiers from pointer target type
Although this is a public header, it should remain source and
binary compatible.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
ppc: drop unused function dct_quantize_altivec()
mpegaudiodec: Do not discard mp_decode_frame() return value.
matroska: do not set invalid default duration if frame rate is zero
mkv: use av_reduce instead of av_d2q for framerate estimation
mkv: report average framerate as minimal as well
avcodec_string: Favor AVCodecContext.codec over the default codec.
cook: Make constants passed to AV_BE2NE32C() unsigned to avoid signed overflow.
Conflicts:
libavcodec/cook.c
libavcodec/ppc/mpegvideo_altivec.c
libavcodec/utils.c
libavformat/matroskadec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If a video track specifies a zero frame rate (invalid but occurs),
this results in a division by zero and subsequent undefined conversion
to integer. Setting the default duration from the frame rate only
if the latter is greater than zero avoids such problems.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
aacenc: Fix issues with huge values of bit_rate.
dv_tablegen: Drop unnecessary av_unused attribute from dv_vlc_map_tableinit().
proresenc: multithreaded quantiser search
riff: use bps instead of bits_per_coded_sample in the WAVEFORMATEXTENSIBLE header
avconv: only set the "channels" option when it exists for the specified input format
avplay: update get_buffer to be inline with avconv
aacdec: More robust output configuration.
faac: Fix multi-channel ordering
faac: Add .channel_layouts
rtmp: Support 'rtmp_playpath', an option which overrides the stream identifier
rtmp: Support 'rtmp_app', an option which overrides the name of application
avutil: add better documentation for AVSampleFormat
Conflicts:
libavcodec/aac.h
libavcodec/aacdec.c
libavcodec/aacenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Other cases are not supported and lead to inconsistencies which
can lead to out of array writes.
Reported-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This replaces the matroskadec one with the same name.
The advantage is not only easier reuse in other demuxers
but also that we can make the decisions after the parser.
This fixes seeking in files that mark the keyframes incorrectly,
for example the file in track ticket #1003.
The matroska variable is still kept to be able to complain
about such broken files.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This option is the stream identifier to play or to publish.
Sometimes the URL parser cannot determine the correct
playpath automatically, so it must be given explicitly
using this option (ie. -rtmp_playpath).
Signed-off-by: Martin Storsjö <martin@martin.st>
This option is the name of application to connect on the RTMP server.
Sometimes the URL parser cannot determine the app name automatically,
so it must be given explicitly using this option (ie. -rtmp_app).
Signed-off-by: Martin Storsjö <martin@martin.st>
The new values lead to error messages when used
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Instead of allocating over the original, free first. MOVStreamContext
is zero initialized so no double free will occur. Same style as other
fixes for the same problem in this file.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* qatar/master:
vsrc_buffer: fix check from 7ae7c41.
libxvid: Reorder functions to avoid forward declarations; make functions static.
libxvid: drop some pointless dead code
wmal: vertical alignment cosmetics
wmal: Warn about missing bitstream splicing feature and ask for sample.
wmal: Skip seekable_frame_in_packet.
wmal: Drop unused variable num_possible_block_size.
avfiltergraph: make the AVFilterInOut alloc/free API public
graphparser: allow specifying sws flags in the graph description.
graphparser: fix the order of connecting unlabeled links.
graphparser: add avfilter_graph_parse2().
vsrc_buffer: allow using a NULL buffer to signal EOF.
swscale: handle last pixel if lines have an odd width.
qdm2: fix a dubious pointer cast
WMAL: Do not try to read rawpcm coefficients if bits is invalid
mov: Fix detecting there is no sync sample.
tiffdec: K&R cosmetics
avf: has_duration does not check the global one
dsputil: fix optimized emu_edge function on Win64.
Conflicts:
doc/APIchanges
libavcodec/libxvid_rc.c
libavcodec/libxvidff.c
libavcodec/tiff.c
libavcodec/wmalosslessdec.c
libavfilter/avfiltergraph.h
libavfilter/graphparser.c
libavfilter/version.h
libavfilter/vsrc_buffer.c
libswscale/output.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
0-sized packets are used to implement variable fps.
However there seems to be a variation where these are not
even stored in the main file but as 0-size index entries
only.
This fixes the sample in trac issue #957, it now plays both
the same ways as in MPlayer and in a way that looks correct.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
They will only cause us to skip writing the Xing header,
not cause any serious breakage.
Related to trac issue #1027.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
swscale: K&R formatting cosmetics (part II)
tiffdec: Add a malloc check and refactor another.
faxcompr: Check malloc results and unify return path
configure: escape colons in values written to config.fate
ac3dsp: call femms/emms at the end of float_to_fixed24() for 3DNow and SSE
matroska: Fix leaking memory allocated for laces.
pthread: Fix crash due to fctx->delaying not being cleared.
vp3: Assert on invalid filter_limit values.
h264: fix 10bit biweight functions after recent x86inc.asm fixes.
ffv1: Fix size mismatch in encode_line.
movenc: Remove a dead initialization
git-howto: Explain how to avoid Windows line endings in git checkouts.
build: Move all arch OBJS declarations into arch subdirectory Makefiles.
Conflicts:
configure
libavcodec/vp3.c
libavformat/matroskadec.c
libavutil/Makefile
libswscale/Makefile
libswscale/swscale.c
libswscale/swscale_internal.h
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Its bad to free things without zeroing them.
This fixes a potential issue when mov_read_close() would be called twice.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If mov_read_header exits under error, the memory allocated is
not freed.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
During error conditions matroska_parse_block may exit without
freeing the memory allocated for laces.
Found via valgrind: http://pastebin.com/E54k8QFU
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Convert key_off initialize to use the same sc->keyframe_count as
used elsewhere in the function.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
During error conditions matroska_parse_block may exit without
freeing the memory allocated for laces.
Found via valgrind: http://pastebin.com/E54k8QFU
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Fixes potential out-of-bounds writes.
This is mostly possible when muxing ALS files where from
an extradata size of about 1050 put_bits would write data
outside the buffer.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
For the FATE test sample used, this only avoids a warning
message.
However for other samples like al05_44.mp4 the converted
file can be played only after this fix.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This will only work for DSEs that are first in a packet, but
that is enough to fix handling of the reference files in
fate-suite/aac (though most of them still have other issues).
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Otherwise for muxers like e.g. latmenc that never call
avio_flush (and do not have a write_trailer function)
a part of the data will always be missing.
Also update references for the voc muxer, which was also
buggy before and did not write out all data.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master:
avplay: Don't free video filters string until the end of decoding.
movenc: small refactor mov_write_packet
movenc: remove redundant check
interplayvideo: fix av_dlog parameter type mismatch
Drop some pointless #ifdefs.
Conflicts:
libavcodec/interplayvideo.c
libavcodec/libxvidff.c
libavcodec/snowenc.c
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously it would just silently write out incorrect data.
This also fixes a potential integer overflow in the allocation.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
"Fix" in so far as at least it will no longer overread and possibly
crash and makes somewhat sense, but no idea whether there is anything
that can play the resulting files (FFmpeg can't).
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Share the formerly internal write_packet with the hinter and move the
fragment flush logic to the user facing one since it is not concerned
about movtrack-only streams.
Fixes bug #263
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (22 commits)
rv40dsp x86: use only one register, for both increment and loop counter
rv40dsp: implement prescaled versions for biweight.
avconv: use default channel layouts when they are unknown
avconv: parse channel layout string
nutdec: K&R formatting cosmetics
vda: Signal 4 byte NAL headers to the decoder regardless of what's in the extradata
mem: Consistently return NULL for av_malloc(0)
vf_overlay: implement poll_frame()
vf_scale: support named constants for sws flags.
lavc doxy: add all installed headers to doxy groups.
lavc doxy: add avfft to the main lavc group.
lavc doxy: add remaining avcodec.h functions to a misc doxygen group.
lavc doxy: add AVPicture functions to a doxy group.
lavc doxy: add resampling functions to a doxy group.
lavc doxy: replace \ with /
lavc doxy: add encoding functions to a doxy group.
lavc doxy: add decoding functions to a doxy group.
lavc doxy: fix formatting of AV_PKT_DATA_{PARAM_CHANGE,H263_MB_INFO}
lavc doxy: add AVPacket-related stuff to a separate doxy group.
lavc doxy: add core functions/definitions to a doxy group.
...
Conflicts:
ffmpeg.c
libavcodec/avcodec.h
libavcodec/vda.c
libavcodec/x86/rv40dsp.asm
libavfilter/vf_scale.c
libavformat/nutdec.c
libavutil/mem.c
tests/ref/acodec/pcm_s24daud
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtsp: Don't use av_malloc(0) if there are no streams
rtsp: Don't use uninitialized data if there are no streams
vaapi: mpeg2: fix slice_vertical_position calculation.
hwaccel: mpeg2: decode first field, if requested.
cosmetics: Fix indentation
rtsp: Don't expose the MS-RTSP RTX data stream to the caller
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids exposing a dummy AVStream which won't get any data
and which will make avformat_find_stream_info wait for info about
this stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtpdec_asf: Set the no_resync_search option for the chained asf demuxer
asfdec: Add an option for not searching for the packet markers
cosmetics: Clean up the tiffenc pix_fmts declaration to match the style of others
cosmetics: Align codec declarations
cosmetics: Convert mimic.c to utf-8
avconv: remove an unused function parameter.
avconv: remove now pointless variables.
avconv: drop support for building without libavfilter.
nellymoserenc: fix crash due to memsetting the wrong area.
libavformat: Only require first packet to be known for audio/video streams
avplay: Don't try to scale timestamps if the tb isn't set
Conflicts:
Changelog
configure
ffmpeg.c
libavcodec/aacenc.c
libavcodec/bmpenc.c
libavcodec/dnxhddec.c
libavcodec/dnxhdenc.c
libavcodec/ffv1.c
libavcodec/flacenc.c
libavcodec/fraps.c
libavcodec/huffyuv.c
libavcodec/libopenjpegdec.c
libavcodec/mpeg12enc.c
libavcodec/mpeg4videodec.c
libavcodec/pamenc.c
libavcodec/pgssubdec.c
libavcodec/pngenc.c
libavcodec/qtrleenc.c
libavcodec/rawdec.c
libavcodec/sgienc.c
libavcodec/tiffenc.c
libavcodec/v210dec.c
libavcodec/wmv2dec.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The format is slightly proprietary.
DVDs use a format of
code byte (0x00, 0x01, 0xfe or 0xff), two data bytes
MOV uses instead
cdat/cdt2 atom, two data bytes
Auto-detecting and supporting both in one decoder is trivial,
so a single codec ID is used.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Searching for packet markers doesn't make sense for this use case,
where packets are fed one at a time to the demuxer.
This fixes playing back streams that have packets not starting
with the 0x82, 0x00, 0x00 marker.
Signed-off-by: Martin Storsjö <martin@martin.st>
It can take a long time before subtitles or data streams show up,
so we shouldn't wait for those before assuming we have all info
for streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add missing trailing commas, break long codec_tag lines and
add spaces in codec_tag declarations.
Signed-off-by: Martin Storsjö <martin@martin.st>
The correct point that seperates ISO and MAC language codes is 0x400
according to the current QT spec. Old QT specs did not list where this
seperation is but apparently only defined the meaning of the first 137.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The handler name is stored as a pascal string in the QT specs (first
byte is the length of the string), thus leading to an invalid metadata
string export.
Also add a second length check based on the first character to avoid
overwriting an already specified handler_name (it happens with Youtube
videos for instance, the handler_name get masked), or specifying an
empty string metadata.
To reproduce the problem, using ffprobe:
./ffprobe -show_packets -print_format compact -fflags +genpts -i
fate_samples/mxf/C0023S01.mxf
You will notice that the last video frame does not have it's PTS being
set, even with using genpts.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Allows avoiding the buffer when using avio read, write and seek functions.
When using the ffmpeg executable -avioflags direct can be used to enable
this mode for input files, but has no effect on output files.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The reason for this is that such files have IndexTableSegments which when parsed
cover EditUnit ranges like this:
[0,1)
[249,250)
[249,377)
[0,249)
where each interval is [IndexStartPosition,IndexStartPosition+IndexDuration).
This would be reduced to a sparse index like:
[0,1), [249,250)
instead of the full range:
[0,249), [249,377)
See TimeCode_HD.mxf, UMID =
060a2b340101010101010410130000000004001aa0e59175025b2a5600da4101.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The audio codecs property is composed by all values except
SUPPORT_SND_INTEL (0x0008) and SUPPORT_SND_UNUSED (0x0010) which are
unused.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* qatar/master:
vsrc_buffer: allow buffering arbitrary number of frames.
vf_scale: avoid a pointless memcpy in no-op conversion.
avfiltergraph: try to reduce format conversions in filters.
avfiltergraph: add an AVClass to AVFilterGraph on next major bump.
id3v2: fix skipping extended header in id3v2.4
Conflicts:
libavfilter/vf_scale.c
libavfilter/vsrc_buffer.c
libavformat/id3v2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
apedec: check bits <= 32.
cavs: Remove unused code.
oggenc: fix condition when not to flush due to keyframe granule.
oggenc: add pagesize option to set preferred page size
libspeexdec: set frame size in libspeex_decode_init()
smacker audio: sign-extend the initial 16-bit predicted value
Conflicts:
libavcodec/apedec.c
libavcodec/libspeexdec.c
libavformat/oggenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes crashes when copying a data track as in trac
issue #236.
No proper timecode tracks will be written though.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This patch fixes the sample from trac issue #522.
The issue is that the mov demuxer insists on using its
calculated sample_size (which is nonsense for old-style tracks)
instead of the one encoded in the track.
The old raw audio code should be using the value in stsz, because
the size of a single sample never makes sense for the size of
a full audio packet, whereas the new code will multiply the
sample size by the chunk size, so it should use the calculated value.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
This patch fixes the sample from trac issue #733.
The issue is that the size of the trak elements is coded
too large, so that the next trak element would be parsed
as part of the first and truncated incorrectly.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
The previous condition of 0 page size was wrong,
that would disable the mechanism for all frames at
a start of a page, thus some keyframes still would not
get their own granule.
The real problem is that header packets must not be flushed,
but they have (and must have) 0 granule and thus would
be detected as keyframes.
Add a separate parameter to mark header packets.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
When set, if an Ogg stream buffer has enough data, a page is made
instead of filling maximum-size pages. Using smaller pages results
smaller seek intervals at the expense of higher container overhead.
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
* qatar/master:
h264: drop ff_h264_ prefix from static function ff_h264_decode_rbsp_trailing()
h264: Make ff_h264_decode_end() static, it is not used externally.
output-example: K&R formatting cosmetics, comment spelling fixes
avf: make the example output the proper message
avf: fix audio writing in the output-example
mov: don't overwrite existing indexes.
lzw: fix potential integer overflow.
truemotion: forbid invalid VLC bitsizes and token values.
truemotion2: handle out-of-frame motion vectors through edge extension.
configure: Check for a different SDL function
Conflicts:
configure
doc/examples/muxing.c
libavcodec/truemotion2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mp3dec: perform I/S and M/S only when frame mode is joint stereo.
id3v2: add another mimetype for JPEG image
lzw: prevent buffer overreads.
WMAL: Remove inaccurate and unnecessary doxy
h264: fix cabac-on-stack after safe cabac reader.
truemotion2: convert packet header reading to bytestream2.
Conflicts:
libavcodec/lzw.c
libavcodec/truemotion2.c
libavformat/id3v2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
