This patch adds support for:
- ffplay ipfs://<cid>
- ffplay ipns://<cid>
IPFS data can be played from so called "ipfs gateways".
A gateway is essentially a webserver that gives access to the
distributed IPFS network.
This protocol support (ipfs and ipns) therefore translates
ipfs:// and ipns:// to a http:// url. This resulting url is
then handled by the http protocol. It could also be https
depending on the gateway provided.
To use this protocol, a gateway must be provided.
If you do nothing it will try to find it in your
$HOME/.ipfs/gateway file. The ways to set it manually are:
1. Define a -gateway <url> to the gateway.
2. Define $IPFS_GATEWAY with the full http link to the gateway.
3. Define $IPFS_PATH and point it to the IPFS data path.
4. Have IPFS running in your local user folder (under $HOME/.ipfs).
Signed-off-by: Mark Gaiser <markg85@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The lensfun filter, at present, loads its database from a path hardcoded
at build time. This may not be known or available to end users.
Added option db_path allows custom path.
Calculate Spatial Info (SI) and Temporal Info (TI) scores for a video, as defined
in ITU-T P.910: Subjective video quality assessment methods for multimedia
applications.
This comment only applies to the scenario in which one uses
the AVCodecContexts embedded in AVStreams. Yet this code sample
stopped doing so in 9897d9f4e074cdc6c7f2409885ddefe300f18dc7;
and the last major version bump even removed the public
AVCodecContexts in AVStreams. So just remove this comment.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids unnecessary churn and build breakage for users, by
making sure the whole version.h is included like it has been so far,
while keeping the benefit of not needing to rebuild most files in
the ffmpeg tree on minor/micro bumps.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also bump the minor versions of all libraries, to signify the
API change of splitting the version.h headers and adding the
new version_major.h header.
Signed-off-by: Martin Storsjö <martin@martin.st>
This patch builds on my previous DFPWM codec patch, adding a raw
audio format to be able to read/write the raw files that are most commonly
used (as no other container format supports it yet).
The muxers are mostly copied from the PCM demuxer and the raw muxers, as
DFPWM is typically stored as raw data.
Please see the previous patch for more information on DFPWM.
Signed-off-by: Jack Bruienne <jackbruienne@gmail.com>
From the wiki page (https://wiki.vexatos.com/dfpwm):
> DFPWM (Dynamic Filter Pulse Width Modulation) is an audio codec
> created by Ben “GreaseMonkey” Russell in 2012, originally to be used
> as a voice codec for asiekierka's pixmess, a C remake of 64pixels.
> It is a 1-bit-per-sample codec which uses a dynamic-strength one-pole
> low-pass filter as a predictor. Due to the fact that a raw DPFWM decoding
> creates a high-pitched whine, it is often followed by some post-processing
> filters to make the stream more listenable.
It has recently gained popularity through the ComputerCraft mod for
Minecraft, which added support for audio through this codec, as well as
the Computronics expansion which preceeded the official support. These
both implement the slightly adjusted 1a version of the codec, which is
the version I have chosen for this patch.
This patch adds a new codec (with encoding and decoding) for DFPWM1a.
The codec sources are pretty simple: they use the reference codec with
a basic wrapper to connect it to the FFmpeg AVCodec system.
To clarify, the codec does not have a specific sample rate - it is
provided by the container (or user), which is typically 48000, but has
also been known to be 32768. The codec does not specify channel info
either, and it's pretty much always used with one mono channel.
However, since it appears that libavcodec expects both sample rate and
channel count to be handled by either the codec or container, I have
made the decision to allow multiple channels interleaved, which as far
as I know has never been used, but it works fine here nevertheless. The
accompanying raw format has a channels option to set this. (I expect
most users of this will not use multiple channels, but it remains an
option just in case.)
This patch will be highly useful to ComputerCraft developers who are
working with audio, as it is the standard format for audio, and there
are few user-friendly encoders out there, and even fewer decoders. It
will streamline the process for importing and listening to audio,
replacing the need to write code or use tools that require very
specific input formats.
You may use the CraftOS-PC program (https://www.craftos-pc.cc) to test
out DFPWM playback. To use it, run the program and type this command:
"attach left speaker" Then run "speaker play <file.dfpwm>" for each file.
The app runs in a sandbox, so files have to be transferred in first;
the easiest way to do this is to simply drag the file on the window.
(Or copy files to the folder at https://www.craftos-pc.cc/docs/saves.)
Sample DFPWM files can be generated with an online tool at
https://music.madefor.cc. This is the current best way to encode DFPWM
files. Simply drag an audio file onto the page, and it will encode it,
giving a download link on the page.
I've made sure to update all of the docs as per Developer§7, and I've
tested it as per section 8. Test files encoded to DFPWM play correctly
in ComputerCraft, and other files that work in CC are correctly decoded.
I have also verified that corrupt files do not crash the decoder - this
should theoretically not be an issue as the result size is constant with
respect to the input size.
Signed-off-by: Jack Bruienne <jackbruienne@gmail.com>
They correspond to the relevant fields from the packet that follows the
one where the expressions are being applied.
Signed-off-by: James Almer <jamrial@gmail.com>
Fix: #7706. After commit 5fdcf85bbf, vaapi encoder's performance
decrease. The reason is that vaRenderPicture() and vaSyncBuffer() are
called at the same time (vaRenderPicture() always followed by a
vaSyncBuffer()). Now I changed them to be called in a asynchronous way,
which will make better use of hardware.
Async_depth is added to increase encoder's performance. The frames that
are sent to hardware are stored in a fifo. Encoder will sync output
after async fifo is full.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Users should switch to the superior AVFifo API.
Unfortunately AVFifoBuffer fields cannot be marked as deprecated because
it would trigger a warning wherever fifo.h is #included, due to
inlined av_fifo_peek2().
Many AVFifoBuffer users operate on fixed-size elements (e.g. pointers),
but the current FIFO API deals exclusively in bytes, requiring extra
complexity in all these callers.
Add a new AVFifo API creating a FIFO with an element size
that may be larger than a byte. All operations on such a FIFO then
operate on complete elements.
This API does not reuse AVFifoBuffer and its API at all, but instead uses
an opaque struct called AVFifo. The AVFifoBuffer API will be deprecated
in a future commit once all of its users have been switched to the new
API.
Not reusing AVFifoBuffer also allowed to use the full range of size_t
from the beginning.
Add intra refresh support to hevc_qsv as well.
Add an new intra refresh type: "horizontal", and an new param
ref_cycle_dist. This param specify the distance between the
beginnings of the intra-refresh cycles in frames.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add b_strategy option to hevc_qsv. By enabling this option, encoder can
use b frames as reference.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add transform_skip option to hevc_qsv. By enabling this option,
the transform_skip_enabled_flag in PPS will be set to 1.
This option is supported on the platform equal or newer than ICL.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add low latency P-pyramid support to qsv. This feature relates to
command line option "-p_strategy". To enable this flag, user also
need to set "-bf" to 0. P-strategy has two modes "1-simple" and
"2-pyramid". The details of the two models refer to
https://github.com/Intel-Media-SDK/MediaSDK/blob/master/doc/mediasdk-man.md#preftype
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add dblk_idc option to 264_qsv and hevc_qsv. Turining on this opion can
disable deblocking.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add max_frame_size support to hevc_qsv as well.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The SDK may insert picture timing SEI for hevc and the code to set mfx
parameter has been added in qsvenc, however the corresponding option is
missing in the hevc option array
Reviewed-by: Limin Wang <lance.lmwang@gmail.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Overlay one video on the top of another.
It takes two inputs and has one output. The first input is the "main" video on
which the second input is overlaid. This filter requires same memory layout for
all the inputs.
An example command to use this filter to overlay overlay.mp4 at the top-left
corner of the main.mp4:
ffmpeg -init_hw_device vaapi=foo:/dev/dri/renderD128 \
-hwaccel vaapi -hwaccel_device foo -hwaccel_output_format vaapi -c:v h264 -i main.mp4 \
-hwaccel vaapi -hwaccel_device foo -hwaccel_output_format vaapi -c:v h264 -i overlay.mp4 \
-filter_complex "[0:v][1:v]overlay_vaapi=0:0:100💯0.5[t1]" \
-map "[t1]" -an -c:v h264_vaapi -y out_vaapi.mp4
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Zachary Zhou <zachary.zhou@intel.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
This is similar to the faststart option of the mov muxer, yet
in contrast to it it works together with reserve_index_space
(the equivalent to reserved_moov_size): If the reserved space
does not suffice, the data is shifted; if not, the Cues are
written at the front without shifting the data.
Several tests that cover (not only) this have been added.
Implements #7017.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In order to be able to extend this struct later (as the Dolby Vision RPU
evolves), all of the 'container' structs are considered extensible, and
the individual constituent fields must instead be accessed via offsets.
The precedent for this style of access is set in
<libavutil/detection_bbox.h>
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Users may take the description literally which leads to inverted
results.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Reviewed-by: Jun Zhao <barryjzhao@tencent.com
Very high stts sample deltas may occasionally be intended but usually
they are written in error or used to store a negative value for dts correction
when treated as signed 32-bit integers.
This option lets the user set an upper limit, beyond which the delta is clamped to 1.
Values greater than the limit if negative when cast to int32 are used to adjust onward dts.
Unit is the track time scale. Default is UINT_MAX - 48000*10 which
allows upto a 10 second dts correction for 48 kHz audio streams while
accommodating 99.9% of uint32 range.
Signed-off-by: Gyan Doshi <ffmpeg@gyani.pro>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Most of user data unregistered SEIs are privated data which defined by user/
encoder. currently, the user data unregistered SEIs found in input are forwarded
as side-data to encoders directly, it'll cause the reencoded output including some
useless UDU SEIs.
I prefer to add one option to enable/disable it and default is off after I saw
the patch by Andreas Rheinhardt:
https://patchwork.ffmpeg.org/project/ffmpeg/patch/AM7PR03MB66607C2DB65E1AD49D975CF18F7B9@AM7PR03MB6660.eurprd03.prod.outlook.com/
How to test by cli:
ffmpeg -y -f lavfi -i testsrc -c:v libx264 -frames:v 1 a.ts
ffmpeg -y -i a.ts -c:v libx264 -udu_sei 1 b.ts
ffmpeg -y -i a.ts -c:v libx264 -udu_sei 0 c.ts
# check the user data unregistered SEIs, you'll see two UDU SEIs for b.ts.
# and mediainfo will show with wrong encoding setting info
ffmpeg -i b.ts -vf showinfo -f null -
ffmpeg -i c.ts -vf showinfo -f null -
This fixes tickets #9500 and #9557.
Reviewed-by: "zhilizhao(赵志立)" <quinkblack@foxmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
The dshow avdevice ignores timestamps for video frames provided by the
DirectShow device, instead using wallclock time, apparently because the
implementer of this code had a device that provided unreliable
timestamps. Me (and others) would like to use the device's timestamps.
The new use_video_device_timestamps option for dshow device enables them
to do so. Since the majority of video devices out there probably provide
fine timestamps, this patch sets the default to using the device
timestamps, which means best fidelity timestamps are used by default.
Using the new option, the user can switch this off and revert to the old
behavior, so a fall back remains available in case the device provides
broken timestamps.
add use_video_device_timestamps to docs.
Closes: #8620
Signed-off-by: Diederick Niehorster <dcnieho@gmail.com>
Reviewed-by: Roger Pack <rogerdpack2@gmail.com>
Because the hls_ts_options will be misunderstand by user,
and then user can use hls_segment_options instead of hls_ts_options.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Because the hls_ts_options will be misunderstand by user that only can
be used in mpegts segments option. So add this option for segments.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Otherwise there is no way to detect an error returned by avio_close() because
ff_format_io_close cannot get the return value.
Checking the return value of the close function is important in order to check
if all data was successfully written and the underlying close() operation was
successful.
It can also be useful even for read mode because it can return any pending
AVIOContext error, so the user don't have to manually check AVIOContext->error.
In order to still support if the user overrides io_close, the generic code only
uses io_close2 if io_close is either NULL or the default io_close callback.
Signed-off-by: Marton Balint <cus@passwd.hu>
Treat values returned from av_dict_get() as const, since they are
internal to AVDictionary.
Signed-off-by: Chad Fraleigh <chadf@triularity.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, the code doing this is spread over several places and may
behave in unexpected ways. E.g. automatic 'default' marking is only done
for streams fed by complex filtergraphs. It is also applied in the order
in which the output streams are initialized, which is effectively
random.
Move processing the dispositions at the end of open_output_file(), when
we already have all the necessary information.
Apply the automatic default marking only if no explicit -disposition
options were supplied by the user, and apply it to the first stream of
each type (excluding attached pics) when there is more than one stream
of that type and no default markings were copied from the input streams.
Explicitly document the new behavior.
Changes the results of some tests, where the output file gets a default
disposition, while it previously did not.
Unfortunately pad_len and pad_dur behaviour was different if 0 was specified,
pad_dur handled 0 duration as infinity, for pad_len, infinity was -1.
Let's make the behaviour consistent by handling 0 duration for pad_dur and
whole_dur as indeed 0 duration. This somewhat changes the behaviour of the
filter if 0 was explicitly specified, but deprecating the old option and adding
a new for the corrected behaviour seemed a bit overkill. So let's document the
change instead.
Signed-off-by: Marton Balint <cus@passwd.hu>
Since texinfo 6.8, there's no longer an INLINE_CONTENTS variable.
makeinfo: warning: set_from_init_file: unknown variable INLINE_CONTENTS
texinfo commit 62a6adfb33b006e187483779974bbd45f0f782b1 replaced
INLINE_CONTENTS with OUTPUT_CONTENTS_LOCATION.
texinfo commit 41f8ed4eb42bf6daa7df7007afd946875597452d replaced
OUTPUT_CONTENTS_LOCATION with CONTENTS_OUTPUT_LOCATION.
With texinfo 6.8 and above, the same as INLINE_CONTENTS=1 could be
achieved by CONTENTS_OUTPUT_LOCATION=inline.
https://www.gnu.org/software/texinfo/manual/texinfo/html_node/HTML-Customization-Variables.html
Since texinfo commit 6a5ceab6a48a4f052baad9f3474d741428409fd7, the
formatting functions, in particular begin_file, program_string and
end_file, are prefixed with format_, i.e. format_begin_file, etc.
This patch fixes building the documentation when texinfo 6.8, or
above, is used:
Unknown formatting type begin_file
at /usr/bin/makeinfo line 415.
Unknown formatting type program_string
at /usr/bin/makeinfo line 415.
Unknown formatting type end_file
at /usr/bin/makeinfo line 415.
Try to make the feature easier to use, especially since the user
have enabled -strict experimental manually. The user shouldn't
be surprised that hls_playlist is enabled for lhls automatically,
so change the log level from warning to info for that.
Such fields can be seen as generally useful in cases where the
API user is not implementing custom AVIO callbacks, but still would
like to know if data is being read or written out, such as in case
data is being read from input but no AVPacket has been received yet.
Originally added as a private entry in commit
3f75e5116b, but its grouping with
the comment noting its private state was missed during merging of
the field from Libav (most likely due to an already existing field
in between).
The new format (given in big/little endian forms) matches the
existing X2RGB10 format, except with B and R channels switched.
AV_PIX_FMT_X2BGR10 data often is created by OpenGL programs
whose buffers use the GL_RGB10 internal format.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It does the same as av_calloc(), so one of them should be removed.
Given that av_calloc() has the shorter name, it is retained.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Unused since 1f63665ca5.
Found-by: Soft Works <softworkz@hotmail.com>
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is supported only by a few decoders (h263, h263p, mpeg(1|2|)video
and mpeg4) and is entirely redundant with parsers. Furthermore, using
it leads to missing frames, as flushing the decoder at the end does not
work properly.
Co-authored-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Microsoft VideoProcessor requires texture with D3DUSAGE_RENDERTARGET flag as output.
There is no way to allocate array of textures with D3D11_BIND_RENDER_TARGET flag
and .ArraySize > 2 by ID3D11Device_CreateTexture2D due to the Microsoft limitation.
Adding AVD3D11FrameDescriptors array to store array of single textures
instead of texture with multiple slices resolves this.
Signed-off-by: Artem Galin <artem.galin@intel.com>
UPD: Rebase of last patch set over current master and use DX9 as default device type.
Makes selection of dxva2/DX9 device type by default as before with explicit d3d11va/DX11 usage to cover more HW configurations.
Added warning message to expect changing default device type in the future.
Fixes TGL / AV1 decode as requires DX11 with explicit DX11 type
selection.
Add headless/multi adapter support and fixes:
https://trac.ffmpeg.org/ticket/7511https://trac.ffmpeg.org/ticket/6827http://ffmpeg.org/pipermail/ffmpeg-trac/2017-November/041901.htmlhttps://trac.ffmpeg.org/ticket/7933338fbcd5bbhttps://github.com/jellyfin/jellyfin/issues/2626#issuecomment-602153952
Any other fixes are welcome including OpenCL interop patch since I don't have proper setup to validate this use case
Decoding, encoding, transcoding have been validated.
child_device_type option is responsible for d3d11va/dxva2 device selection
Usage examples:
DirectX 11:
-init_hw_device qsv:hw,child_device_type=d3d11va
-init_hw_device qsv:hw,child_device_type=d3d11va,child_device=0
OR
-init_hw_device d3d11va=dx -init_hw_device qsv@dx
DirectX 9 is still supported but requires explicit selection:
-init_hw_device qsv:hw,child_device_type=dxva2
OR
-init_hw_device dxva2=dx -init_hw_device qsv@dx
Signed-off-by: Artem Galin <artem.galin@intel.com>
ff_pnm_parser and ff_vp3_parser already hit the current limit;
an addition to the former (to handle pfm) is planned.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Implements a gray world color correction algorithm
using a log scale LAB colorspace.
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Remove async flag from filter's perspective after the unification
of async and sync modes in the DNN backend.
Signed-off-by: Shubhanshu Saxena <shubhanshu.e01@gmail.com>
Up until now, the Matroska muxer did not use the dispositions it is
given as-is; instead it by default overrode the disposition of the first
track of a kind (audio, video, subtitles) if no track of this kind has
the default disposition set. And up until recently, it also enforced
by default that no more than one track of each kind be marked as
default.
The rationale for the former is that there are lots of containers which
lack the concept of default streams, so that it is not uncommon for no
stream to be marked as default at all; the rationale for the latter was
that up until recently, it was dubious whether the Matroska specification
allowed more than one default stream for track type (e.g. mkvmerge
disallowed it). It was this point which led to the implementation of
the above mentioned behaviour inspired by mkvmerge.
Yet the Matroska specifications have changed and now explicitly allow
to set more than one track of each type as default, so that the main
reason of not using the dispositions as-is was rendered moot. Therefore
this commit changes the default to pass the disposition through.
The matroska-mpegts-remux FATE-test has been updated to still use the
old "infer" mode so that it is still covered by FATE; the
matroska-zero-length-block test has also been updated to cover
the infer_no_subs mode. The references for lots of other FATE tests
needed to be updated because of a newly added FlagDefault element with
value zero (whereas a FlagDefault with value 1 needn't be coded at all,
as it coincided with the default value of said element).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The Matroska specifications have evolved and now allow to mark
multiple tracks of the same kind as default (whether this was legal or
not before was dubious; e.g. mkvmerge disallowed it). Yet when the
Matroska muxer is set to infer default dispositions if absent, it also
enforced the now outdated restriction. So update this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is unnecessary as the number of static inputs and outputs can now
be directly read via AVFilter.nb_(in|out)puts.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is intended as replacement for avfilter_pad_count(). In contrast to
the latter, it avoids a loop.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In particular, document that av_opt_copy() always disentangles
allocated options even on error; this guarantee is needed to e.g.
properly free duplicated thread contexts in libavcodec on error.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The reason why the generic av_image_copy_uc_from() doesn't really
fit in the case for Vulkan is because some planes may be copied via
other methods (such as mapping GPU memory), and if they don't satisfy
the strict alignment requirements, a gpu image->gpu buffer->cpu ram
copy is performed.
We need this for hwcontext_vulkan, and I think this will also be
useful to API users like libplacebo who would rather not write
a custom SIMD memcpy.
common.h currently contains several things: Math macros, UTF-8 macros,
other fundamental macros; furthermore it also contains miscellaneous
math functions and it (directly and indirectly) includes lots of other
headers.
This commit moves the "other fundamental macros" to macros.h which is
a more fitting place.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In dd770883e9, support for expressions was added. Among the constants
added were labels of qnstc, qpal, sntsc & spal.
These were added in ba2a8cb40b to represent parameter permutations where
only the resolution is different. They don't have any usage currency and
don't represent any industry standards or convention in terms of framerate.
These bits are reserved in earlier versions of the H.264 spec, and
some poor hardware decoders require they are zero. Thus, it is useful
to be able to zero these on streams that may have them set. The result
is still a valid H.264 bitstream.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Support single input for guided filter by adding guidance mode.
If the guidance mode is off, single input is required. And
edge-preserving smoothing is conducted. If the mode is on, two
inputs are needed. The second input serves as the guidance. For
this mode, more tasks are supported, such as detail enhancement,
dehazing and so on.
Signed-off-by: Xuewei Meng <xwmeng96@gmail.com>
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
HDR10+ metadata is stored in the bit stream for HEVC. The story is
different for VP9 and cannot store the metadata in the bit stream.
HDR10+ should be passed to packet side data an stored in the container
(mkv) for VP9.
This CL is taking HDR10+ from AVFrame side data in libvpxenc and is
passing it to the AVPacket side data.
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Zern <jzern@google.com>
Broken in 753930bc73, as the path to
Doxyfile passed to doxy-wrapper.sh is relative to the build dir, while
the recipe cd's to the source dir before invoking the wrapper.
It can be useful to library users, and is currently being used by ffmpeg.c
Suggested-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The user should not rely on all options always being recognized
(in particular not on error).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This feature can be used with dnn detection by setting vf_drawtext's option
text_source=side_data_detection_bboxes, for example:
./ffmpeg -i face.jpeg -vf dnn_detect=dnn_backend=openvino:model=face-detection-adas-0001.xml:\
input=data:output=detection_out:labels=face-detection-adas-0001.label,drawbox=box_source=
side_data_detection_bboxes,drawtext=text_source=side_data_detection_bboxes:fontcolor=green:\
fontsize=40, -y face_detect.jpeg
Please note, the default fontsize of vf_drawtext is 12, which may be too
small to be seen clearly.
Signed-off-by: Ting Fu <ting.fu@intel.com>
This feature can be used with dnn detection by setting vf_drawbox's
option box_source=side_data_detection_bboxes, for example:
./ffmpeg -i face.jpeg -vf dnn_detect=dnn_backend=openvino:model=face-detection-adas-0001.xml:\
input=data:output=detection_out:labels=face-detection-adas-0001.label,\
drawbox=box_source=side_data_detection_bboxes -y face_detect.jpeg
Signed-off-by: Ting Fu <ting.fu@intel.com>
With some minor changes by Marton Balint:
- removed trailing whitespace
- fixed network_descriptors_length
- fixed reserved_future_use flag in the start of the section
- removed unused program variable
- emit first NIT after PAT
- some other cosmetics
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
Signed-off-by: Marton Balint <cus@passwd.hu>
Two modes are supported in guided filter, basic mode and fast mode.
Basic mode is the initial pushed guided filter without optimization.
Fast mode is implemented based on the basic one by sub-sampling method.
The sub-sampling ratio which can be defined by users controls the
algorithm complexity. The larger the sub-sampling ratio, the lower
the algorithm complexity.
Signed-off-by: Xuewei Meng <xwmeng96@gmail.com>
Reviewed-by: Steven Liu <liuqi05@kuaishou.com>
commit 95b854dd06 "rename sum option to normalize" missed command
part docs
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Reviewed-by: Gyan Doshi <ffmpeg@gyani.pro>
Add examples on how to use this filter, and improve the code style.
Implement the slice-level parallelism for guided filter.
Add the basic version of guided filter.
Signed-off-by: Xuewei Meng <xwmeng96@gmail.com>
Reviewed-by: Steven Liu <liuqi05@kuaishou.com>
classification is done on every detection bounding box in frame's side data,
which are the results of object detection (filter dnn_detect).
Please refer to commit log of dnn_detect for the material for detection,
and see below for classification.
- download material for classifcation:
wget https://github.com/guoyejun/ffmpeg_dnn/raw/main/models/openvino/2021.1/emotions-recognition-retail-0003.bin
wget https://github.com/guoyejun/ffmpeg_dnn/raw/main/models/openvino/2021.1/emotions-recognition-retail-0003.xml
wget https://github.com/guoyejun/ffmpeg_dnn/raw/main/models/openvino/2021.1/emotions-recognition-retail-0003.label
- run command as:
./ffmpeg -i cici.jpg -vf dnn_detect=dnn_backend=openvino:model=face-detection-adas-0001.xml:input=data:output=detection_out:confidence=0.6:labels=face-detection-adas-0001.label,dnn_classify=dnn_backend=openvino:model=emotions-recognition-retail-0003.xml:input=data:output=prob_emotion:confidence=0.3:labels=emotions-recognition-retail-0003.label:target=face,showinfo -f null -
We'll see the detect&classify result as below:
[Parsed_showinfo_2 @ 0x55b7d25e77c0] side data - detection bounding boxes:
[Parsed_showinfo_2 @ 0x55b7d25e77c0] source: face-detection-adas-0001.xml, emotions-recognition-retail-0003.xml
[Parsed_showinfo_2 @ 0x55b7d25e77c0] index: 0, region: (1005, 813) -> (1086, 905), label: face, confidence: 10000/10000.
[Parsed_showinfo_2 @ 0x55b7d25e77c0] classify: label: happy, confidence: 6757/10000.
[Parsed_showinfo_2 @ 0x55b7d25e77c0] index: 1, region: (888, 839) -> (967, 926), label: face, confidence: 6917/10000.
[Parsed_showinfo_2 @ 0x55b7d25e77c0] classify: label: anger, confidence: 4320/10000.
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
This also allows to exclusively use pointers to const AVCodec in
fftools/ffmpeg_opt.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Deprecated in c29038f304.
The resample filter based upon this library has been removed as well.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Deprecated in d682ae70b4,
ineffective since ca4df37f06.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Several options that were too codec-specific were deprecated between
0e6c853221 and
0e9c4fe254.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The build log:
** Unknown command `@code' (left as is) (in src/doc/muxers.texi l. 2020)
*** '{' without macro. Before: -map} option with the ffmpeg CLI tool. (in src/doc/muxers.texi l. 2020)
*** '}' without opening '{' before: option with the ffmpeg CLI tool. (in src/doc/muxers.texi l. 2020)
Below are the example steps to do object detection:
1. download and install l_openvino_toolkit_p_2021.1.110.tgz from
https://software.intel.com/content/www/us/en/develop/tools/openvino-toolkit/download.html
or, we can get source code (tag 2021.1), build and install.
2. export LD_LIBRARY_PATH with openvino settings, for example:
.../deployment_tools/inference_engine/lib/intel64/:.../deployment_tools/inference_engine/external/tbb/lib/
3. rebuild ffmpeg from source code with configure option:
--enable-libopenvino
--extra-cflags='-I.../deployment_tools/inference_engine/include/'
--extra-ldflags='-L.../deployment_tools/inference_engine/lib/intel64'
4. download model files and test image
wget https://github.com/guoyejun/ffmpeg_dnn/raw/main/models/openvino/2021.1/face-detection-adas-0001.bin
wget https://github.com/guoyejun/ffmpeg_dnn/raw/main/models/openvino/2021.1/face-detection-adas-0001.xml
wget
https://github.com/guoyejun/ffmpeg_dnn/raw/main/models/openvino/2021.1/face-detection-adas-0001.label
wget https://github.com/guoyejun/ffmpeg_dnn/raw/main/images/cici.jpg
5. run ffmpeg with:
./ffmpeg -i cici.jpg -vf dnn_detect=dnn_backend=openvino:model=face-detection-adas-0001.xml:input=data:output=detection_out:confidence=0.6:labels=face-detection-adas-0001.label,showinfo -f null -
We'll see the detect result as below:
[Parsed_showinfo_1 @ 0x560c21ecbe40] side data - detection bounding boxes:
[Parsed_showinfo_1 @ 0x560c21ecbe40] source: face-detection-adas-0001.xml
[Parsed_showinfo_1 @ 0x560c21ecbe40] index: 0, region: (1005, 813) -> (1086, 905), label: face, confidence: 10000/10000.
[Parsed_showinfo_1 @ 0x560c21ecbe40] index: 1, region: (888, 839) -> (967, 926), label: face, confidence: 6917/10000.
There are two faces detected with confidence 100% and 69.17%.
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Remove the unneeded wrapping sequence element. Also the
minOccurs/maxOccurs occurrence indicators on the inner element
definitions can be removed.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
This avoids crafted files from consuming excessive resources recomputing the clut after each pixel change
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
And forward it to the underlying UDP protocol.
Fixes ticket #7517.
Signed-off-by: Jiangjie Gao <gaojiangjie@live.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Add the "http_proxy" option and its handling to the "tls" protocol,
pass the option from the "https" protocol.
The "https" protocol already defines the "http_proxy" command line
option, like the "http" protocol does. The "http" protocol properly
honors that command line option in addition to the environment
variable. The "https" protocol doesn't, because the proxy is
evaluated in the underlying "tls" protocol, which doesn't have this
option, and thus only handles the environment variable, which it
has access to.
Fixes#7223.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Marton Balint <cus@passwd.hu>
av_adler32_update() is used by av_hash_update() which will be switched
to size_t at the next bump. So it also has to be made to use size_t.
This is also necessary for framecrcenc.c, because the size of side data
will become a size_t, too.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
64 bits are needed in order to retain the uid values of Matroska
chapters; the type is kept signed because the semantics of NUT chapters
depend upon whether the id is > 0 or < 0.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
