The next pointer is kept at the end for backwards compatability until the
major bump, when it should ideally be moved at the front.
Signed-off-by: James Almer <jamrial@gmail.com>
And replace the flags parameter with a function callback that can be used to
copy the contents of the packet (e.g, av_packet_ref and av_packet_copy_props).
Signed-off-by: James Almer <jamrial@gmail.com>
If the write_id3v2 option is set, the aiff muxer would write id3v2 tags
if there is global metadata or if there are attached pics to write.
Chapters are ignored in this check that precedes writing id3v2 tags.
Yet 47ac344970 added support for writing
chapters as id3v2 tags, so one should check for the existence of chapters,
too; otherwise the chapters would only be written in case there is
global metadata or an attached pic.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
To make it consistent with other muxers.
The user can still control the generic flushing behaviour after write_header
(same way as after packets) using the -flush_packets option, the default
typically means to flush unless a non-streamed file output is used.
Therefore this change should have no adverse effect on streaming, even if it is
assumed that the first packet has a clean buffer, so small seekbacks within the
output buffer work even when the IO context is not seekable.
Signed-off-by: Marton Balint <cus@passwd.hu>
Prevents memleaks if the trailer is never written.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The check "if (!pb->seekable & AVIO_SEEKABLE_NORMAL)" is wrong, because
! has higher precendence than &. But it is also redundant, because this
part of the code is only ever reached when the AVIO_SEEKABLE_NORMAL flag
is set for pb. So simply remove the check.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Matthieu Bouron <matthieu.bouron@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Up until now, aiffenc didn't rely on the standard functions for adding
an element to a linked list and freeing the list, but instead
reimplemented them. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Matthieu Bouron <matthieu.bouron@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It is supposed to be a flag. The only currently defined value is
AVIO_SEEKABLE_NORMAL, but other ones may be added in the future.
However all the current lavf code treats this field as a bool (mainly
for historical reasons).
Change all those cases to properly check for AVIO_SEEKABLE_NORMAL.
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
As with the change to flacenc this allows the user to control the amount
of padding they want added to the file.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also add missing trailing commas, break long codec_tag lines and
add spaces in codec_tag declarations.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
x86: cabac: replace explicit memory references with "m" operands
avplay: don't request a stereo downmix
wmapro: use av_float2int()
lavc: avoid invalid memcpy() in avcodec_default_release_buffer()
lavu: replace int/float punning functions
lavfi: install libavfilter/vsrc_buffer.h
Remove extraneous semicolons
sdp: Restore the original mp4 format h264 extradata if converted
rtpenc: Add support for mp4 format h264
rtpenc: Simplify code by introducing a separate end pointer
movenc: Use the actual converted sample for RTP hinting
Fix a bunch of common typos.
Conflicts:
doc/developer.texi
doc/eval.texi
doc/filters.texi
doc/protocols.texi
ffmpeg.c
ffplay.c
libavcodec/mpegvideo.h
libavcodec/x86/cabac.h
libavfilter/Makefile
libavformat/avformat.h
libavformat/cafdec.c
libavformat/flvdec.c
libavformat/flvenc.c
libavformat/gxfenc.c
libavformat/img2.c
libavformat/movenc.c
libavformat/mpegts.c
libavformat/rtpenc_h264.c
libavformat/utils.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The existing functions defined in intfloat_readwrite.[ch] are
both slow and incorrect (infinities are not handled).
This introduces a new header with fast, inline conversion
functions using direct union punning assuming an IEEE-754
system, an assumption already made throughout the code.
The one use of Intel/Motorola extended 80-bit format is
replaced by simpler code sufficient under the present
constraints (positive normal values).
The old functions are marked deprecated and retained for
compatibility.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
rtpdec: Templatize the code for different g726 bitrate variants
rv40: move loop filter to rv34dsp context
lavf: make av_set_pts_info private.
rtpdec: Add support for G726 audio
rtpdec: Add an init function that can do custom codec context initialization
avconv: make copy_tb on by default.
matroskadec: don't set codec timebase.
rmdec: don't set codec timebase.
avconv: compute next_pts from input packet duration when possible.
lavf: estimate frame duration from r_frame_rate.
avconv: update InputStream.pts in the streamcopy case.
Conflicts:
avconv.c
libavdevice/alsa-audio-dec.c
libavdevice/bktr.c
libavdevice/fbdev.c
libavdevice/libdc1394.c
libavdevice/oss_audio.c
libavdevice/v4l.c
libavdevice/v4l2.c
libavdevice/vfwcap.c
libavdevice/x11grab.c
libavformat/au.c
libavformat/eacdata.c
libavformat/flvdec.c
libavformat/mpegts.c
libavformat/mxfenc.c
libavformat/rtpdec_g726.c
libavformat/wtv.c
libavformat/xmv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ffmpeg: fix some indentation
ffmpeg: fix operation with --disable-avfilter
simple_idct: remove disabled code
motion_est: remove disabled code
vc1: remove disabled code
fate: separate lavf-mxf_d10 test from lavf-mxf
cabac: Move code only used in the cabac test program to cabac.c.
ffplay: warn that -pix_fmt is no longer working, suggest alternative
ffplay: warn that -s is no longer working, suggest alternative
lavf: rename enc variable in utils.c:has_codec_parameters()
lavf: use designated initialisers for all (de)muxers.
wav: remove a use of deprecated AV_METADATA_ macro
rmdec: remove useless ap parameter from rm_read_header_old()
dct-test: remove write-only variable
des: fix #if conditional around P_shuffle
Use LOCAL_ALIGNED in ff_check_alignment()
Conflicts:
ffmpeg.c
libavformat/avidec.c
libavformat/matroskaenc.c
libavformat/mp3enc.c
libavformat/oggenc.c
libavformat/utils.c
tests/ref/lavf/mxf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (40 commits)
H.264: template left MB handling
H.264: faster fill_decode_caches
H.264: faster write_back_*
H.264: faster fill_filter_caches
H.264: make filter_mb_fast support the case of unavailable top mb
Do not include log.h in avutil.h
Do not include pixfmt.h in avutil.h
Do not include rational.h in avutil.h
Do not include mathematics.h in avutil.h
Do not include intfloat_readwrite.h in avutil.h
Remove return statements following infinite loops without break
RTSP: Doxygen comment cleanup
doxygen: Escape '\' in Doxygen documentation.
md5: cosmetics
md5: use AV_WL32 to write result
md5: add fate test
md5: include correct headers
md5: fix test program
doxygen: Drop array size declarations from Doxygen parameter names.
doxygen: Fix parameter names to match the function prototypes.
...
Conflicts:
libavcodec/x86/dsputil_mmx.c
libavformat/flvenc.c
libavformat/oggenc.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: fix partial run when no samples path is specified
ARM: NEON fixed-point forward MDCT
ARM: NEON fixed-point FFT
lavf: bump minor version and add an APIChanges entry for avio changes
avio: simplify url_open_dyn_buf_internal by using avio_alloc_context()
avio: make url_fdopen internal.
avio: make url_open_dyn_packet_buf internal.
avio: avio_ prefix for url_close_dyn_buf
avio: avio_ prefix for url_open_dyn_buf
avio: introduce an AVIOContext.seekable field
ac3enc: use generic fixed-point mdct
lavfi: add fade filter
Change yadif to not use out of picture lines.
lavc: deprecate AVCodecContext.antialias_algo
lavc: mark mb_qmin/mb_qmax for removal on next major bump.
Conflicts:
doc/filters.texi
libavcodec/ac3enc_fixed.h
libavcodec/ac3enc_float.h
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/vf_fade.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
