* qatar/master:
mpegvideo: reduce excessive inlining of mpeg_motion()
mpegvideo: convert mpegvideo_common.h to a .c file
build: factor out mpegvideo.o dependencies to CONFIG_MPEGVIDEO
Move MASK_ABS macro to libavcodec/mathops.h
x86: move MANGLE() and related macros to libavutil/x86/asm.h
x86: rename libavutil/x86_cpu.h to libavutil/x86/asm.h
aacdec: Don't fall back to the old output configuration when no old configuration is present.
rtmp: Add message tracking
rtsp: Support mpegts in raw udp packets
rtsp: Support receiving plain data over UDP without any RTP encapsulation
rtpdec: Remove an unused include
rtpenc: Remove an av_abort() that depends on user-supplied data
vsrc_movie: discourage its use with avconv.
avconv: allow no input files.
avconv: prevent invalid reads in transcode_init()
avconv: rename OutputStream.is_past_recording_time to finished.
Conflicts:
configure
doc/filters.texi
ffmpeg.c
ffmpeg.h
libavcodec/Makefile
libavcodec/aacdec.c
libavcodec/mpegvideo.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavr: fix handling of custom mix matrices
fate: force pix_fmt in lagarith-rgb32 test
fate: add tests for lagarith lossless video codec.
ARMv6: vp8: fix stack allocation with Apple's assembler
ARM: vp56: allow inline asm to build with clang
fft: 3dnow: fix register name typo in DECL_IMDCT macro
x86: dct32: port to cpuflags
x86: build: replace mmx2 by mmxext
Revert "wmapro: prevent division by zero when sample rate is unspecified"
wmapro: prevent division by zero when sample rate is unspecified
lagarith: fix color plane inversion for YUY2 output.
lagarith: pad RGB buffer by 1 byte.
dsputil: make add_hfyu_left_prediction_sse4() support unaligned src.
Conflicts:
doc/APIchanges
libavcodec/lagarith.c
libavfilter/x86/gradfun.c
libavutil/cpu.h
libavutil/version.h
libswscale/utils.c
libswscale/version.h
libswscale/x86/yuv2rgb.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vc1dec: Remove separate scaling function for interlaced field MVs
vc1dec: Invoke edge_emulation regardless of MV precision
x86: Use consistent 3dnowext function and macro name suffixes
g723_1: scale output as supposed for the case with postfilter disabled
g723_1: increase excitation storage by 4
g723_1: fix upper bound parameter from inverse maximum autocorrelation
g723_1: make scale_vector() behave like the reference
g723_1: fix off-by-one error in normalize_bits()
g723_1: save/restore excitation with offset to store LPC history
wmapro: prevent division by zero when sample rate is unspecified
x86: proresdsp: improve SIGNEXTEND macro comments
x86: h264dsp: K&R formatting cosmetics
LICENSE: Document all GPL files
Conflicts:
libavcodec/g723_1.c
libavcodec/wmaprodec.c
libavcodec/x86/h264dsp_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Refactoring mmx2/mmxext YASM code with cpuflags will force renames.
So switching to a consistent naming scheme beforehand is sensible.
The name "mmxext" is more official and widespread and also the name
of the CPU flag, as reported e.g. by the Linux kernel.
Currently there is a wild mix of 3dn2/3dnow2/3dnowext. Switching to
"3dnowext", which is a more common name of the CPU flag, as reported
e.g. by the Linux kernel, unifies this.
These functions are not faster than other mmx implementations on
any hardware I have been able to test on, and they are horribly
inaccurate. There is thus no reason to ever use them.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master: (35 commits)
h264_idct_10bit: port x86 assembly to cpuflags.
x86inc: clip num_args to 7 on x86-32.
x86inc: sync to latest version from x264.
fft: rename "z" to "zc" to prevent name collision.
wv: return meaningful error codes.
wv: return AVERROR_EOF on EOF, not EIO.
mp3dec: forward errors for av_get_packet().
mp3dec: remove a pointless local variable.
mp3dec: remove commented out cruft.
lavfi: bump minor to mark stabilizing the ABI.
FATE: add tests for yadif.
FATE: add a test for delogo video filter.
FATE: add a test for amix audio filter.
audiogen: allow specifying random seed as a commandline parameter.
vc1dec: Override invalid macroblock quantizer
vc1: avoid reading beyond the last line in vc1_draw_sprites()
vc1dec: check that coded slice positions and interlacing match.
vc1dec: Do not ignore ff_vc1_parse_frame_header_adv return value
configure: Move parts that should not be user-selectable to CONFIG_EXTRA
lavf: remove commented out cruft in avformat_find_stream_info()
...
Conflicts:
Makefile
configure
libavcodec/vc1dec.c
libavcodec/x86/h264_deblock.asm
libavcodec/x86/h264_deblock_10bit.asm
libavcodec/x86/h264dsp_mmx.c
libavfilter/version.h
libavformat/mp3dec.c
libavformat/utils.c
libavformat/wv.c
libavutil/x86/x86inc.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
libopenjpeg: support YUV and deep RGB pixel formats
Fix typo in v410 decoder.
vf_yadif: unset cur_buf on the input link.
vf_overlay: ensure the overlay frame does not get leaked.
vf_overlay: prevent premature freeing of cur_buf
Support urlencoded http authentication credentials
rtmp: Return an error when the client bandwidth is incorrect
rtmp: Return proper error code in handle_server_bw
rtmp: Return proper error code in handle_client_bw
rtmp: Return proper error codes in handle_chunk_size
lavr: x86: add missing vzeroupper in ff_mix_1_to_2_fltp_flt()
vp8: Replace x*155/100 by x*101581>>16.
vp3: don't use calls to inline asm in yasm code.
x86/dsputil: put inline asm under HAVE_INLINE_ASM.
dsputil_mmx: fix incorrect assembly code
rtmp: Factorize the code by adding handle_invoke
rtmp: Factorize the code by adding handle_chunk_size
rtmp: Factorize the code by adding handle_ping
rtmp: Factorize the code by adding handle_client_bw
rtmp: Factorize the code by adding handle_server_bw
Conflicts:
libavcodec/libopenjpegdec.c
libavcodec/x86/dsputil_mmx.c
libavfilter/vf_overlay.c
libavformat/Makefile
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In ff_put_pixels_clamped_mmx(), there are two assembly code blocks.
In the first block (in the unrolled loop), the instructions
"movq 8%3, %%mm1 \n\t", and so forth, have problems.
From above instruction, it is clear what the programmer wants: a load from
p + 8. But this assembly code doesn’t guarantee that. It only works if the
compiler puts p in a register to produce an instruction like this:
"movq 8(%edi), %mm1". During compiler optimization, it is possible that the
compiler will be able to constant propagate into p. Suppose p = &x[10000].
Then operand 3 can become 10000(%edi), where %edi holds &x. And the instruction
becomes "movq 810000(%edx)". That is, it will stride by 810000 instead of 8.
This will cause a segmentation fault.
This error was fixed in the second block of the assembly code, but not in
the unrolled loop.
How to reproduce:
This error is exposed when we build using Intel C++ Compiler, with
IPO+PGO optimization enabled. Crashed when decoding an MJPEG video.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
In file libavcodec/x86/dsputil_mmx.c, function ff_put_pixels_clamped_mmx(), there are two assembly code blocks. In the first block (in the unrolled loop), the instructions "movq 8%3, %%mm1 \n\t" etc have problem.
For above instruction, it is clear what the programmer wants: a load from p + 8. But this assembly code doesn’t guarantee that. It only works if the compiler puts p in a register to produce an instruction like this: “movq 8(%edi), %mm1”. During compiler optimization, it is possible that the compiler will be able to constant propagate into p. Suppose p = &x[10000]. Then operand 3 can become 10000(%edi), where %edi holds &x. And the instruction becomes “movq 810000(%edx)”. That is, it will stride by 810000 instead of 8.
This will cause the segmentation fault.
This error was fixed in the second block of the assembly code, but not in the unrolled loop.
How to reproduce:
This error is exposed when we build the ffmpeg using Intel C++ Compiler, IPO+PGO optimization. The ffmpeg was crashed when decoding a mjpeg video.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Print full compiler identification, not only version number
flacdec: reverse lpc coeff order, simplify filter
x86: dsputil: drop some unused CPU flag debug code
Conflicts:
cmdutils.c
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ppc: fix build with altivec disabled
vp3: move idct and loop filter pointers to new vp3dsp context
build: add CONFIG_VP3DSP, reduce repetition in OBJS lists
tscc2: do not add/subtract 128 bias during DCT
tscc2: fix typo in DCT
configure: clarify external library section of help output
configure: mark libfdk-aac as nonfree
configure: cosmetics: drop some unnecessary backslashes
os_support: K&R formatting cosmetics
Conflicts:
configure
libavcodec/vp3.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This moves all VP3-specific function pointers from dsputil to a
new vp3dsp context. There is no reason to ever use the VP3 IDCT
where an MPEG2 IDCT is expected or vice versa.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
x86: Only use optimizations with cmov if the CPU supports the instruction
x86: Add CPU flag for the i686 cmov instruction
x86: remove unused inline asm macros from dsputil_mmx.h
x86: move some inline asm macros to the only places they are used
lavfi: Add the af_channelmap audio channel mapping filter.
lavfi: add join audio filter.
lavfi: allow audio filters to request a given number of samples.
lavfi: support automatically inserting the fifo filter when needed.
lavfi/audio: eliminate ff_default_filter_samples().
Conflicts:
Changelog
libavcodec/x86/h264dsp_mmx.c
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/avfilter.h
libavfilter/avfiltergraph.c
libavfilter/version.h
libavutil/x86/cpu.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
float_dsp: ppc: add a separate header for Altivec function prototypes
ARM: fix float_dsp breakage from d5a7229
Add a float DSP framework to libavutil
PPC: Move types_altivec.h and util_altivec.h from libavcodec to libavutil
ARM: Move asm.S from libavcodec to libavutil
vc1dsp: mark put/avg_vc1_mspel_mc() always_inline
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
dwt: check malloc calls
ppc: Drop unused header regs.h
af_resample: remove an extra space in the log output
Convert vector_fmul range of functions to YASM and add AVX versions
lavfi: add an audio split filter
lavfi: rename vf_split.c to split.c
Conflicts:
doc/filters.texi
libavcodec/ppc/regs.h
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/f_split.c
libavfilter/split.c
libavfilter/version.h
libavfilter/vf_split.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (25 commits)
rv40dsp x86: MMX/MMX2/3DNow/SSE2/SSSE3 implementations of MC
ape: Use unsigned integer maths
arm: dsputil: fix overreads in put/avg_pixels functions
h264: K&R formatting cosmetics for header files (part II/II)
h264: K&R formatting cosmetics for header files (part I/II)
rtmp: Implement check bandwidth notification.
rtmp: Support 'rtmp_swfurl', an option which specifies the URL of the SWF player.
rtmp: Support 'rtmp_flashver', an option which overrides the version of the Flash plugin.
rtmp: Support 'rtmp_tcurl', an option which overrides the URL of the target stream.
cmdutils: Add fallback case to switch in check_stream_specifier().
sctp: be consistent with socket option level
configure: Add _XOPEN_SOURCE=600 to Solaris preprocessor flags.
vcr1enc: drop pointless empty encode_init() wrapper function
vcr1: drop pointless write-only AVCodecContext member from VCR1Context
vcr1: group encoder code together to save #ifdefs
vcr1: cosmetics: K&R prettyprinting, typos, parentheses, dead code, comments
mov: make one comment slightly more specific
lavr: replace the SSE version of ff_conv_fltp_to_flt_6ch() with SSE4 and AVX
lavfi: move audio-related functions to a separate file.
lavfi: remove some audio-related function from public API.
...
Conflicts:
cmdutils.c
libavcodec/h264.h
libavcodec/h264_mvpred.h
libavcodec/vcr1.c
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/defaults.c
libavfilter/internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Code mostly inspired by vp8's MC, however:
- its MMX2 horizontal filter is worse because it can't take advantage of
the coefficient redundancy
- that same coefficient redundancy allows better code for non-SSSE3 versions
Benchmark (rounded to tens of unit):
V8x8 H8x8 2D8x8 V16x16 H16x16 2D16x16
C 445 358 985 1785 1559 3280
MMX* 219 271 478 714 929 1443
SSE2 131 158 294 425 515 892
SSSE3 120 122 248 387 390 763
End result is overall around a 15% speedup for SSSE3 version (on 6 sequences);
all loop filter functions now take around 55% of decoding time, while luma MC
dsp functions are around 6%, chroma ones are 1.3% and biweight around 2.3%.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
4xm: fix invalid array indexing
rv34dsp: factorize a multiplication in the noround inverse transform
rv40: perform bitwise checks in loop filter
rv34: remove inline keyword from rv34_decode_block().
rv40: change a logical test into a bitwise one.
rv34: remove constant parameter
rv40: don't always do the full prev_type search
dsputil x86: revert a test back to its previous value
rv34dsp x86: implement MMX2 inverse transform
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The new lowres support is limited to decoders where lowres decoding
is possible in high quality.
I was not able to measure any speed difference, but if one is found
the 2-3 lines that might affect speed can be made compile time conditional
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
ARM: allow runtime masking of CPU features
dsputil: remove unused functions
mov: Treat keyframe indexes as 1-origin if starting at non-zero.
mov: Take stps entries into consideration also about key_off.
Remove lowres video decoding
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/arm/vp8dsp_init_arm.c
libavcodec/libopenjpegdec.c
libavcodec/mjpegdec.c
libavcodec/mpegvideo.c
libavcodec/utils.c
libavformat/mov.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
avcodec: remove AVCodecContext.dsp_mask
avconv: fix a segfault when default encoder for a format doesn't exist.
utvideo: general cosmetics
aac: Handle HE-AACv2 when sniffing a channel order.
movenc: Support high sample rates in isomedia formats by setting the sample rate field in stsd to 0.
xxan: Remove write-only variable in xan_decode_frame_type0().
ivi_common: Initialize a variable at declaration in ff_ivi_decode_blocks().
Conflicts:
ffmpeg.c
libavcodec/utvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This removes all references to AVCodecContext.dsp_mask and marks
it for eviction at the next version bump. It has been superseded
by av_set_cpu_flag_mask() which, unlike this field, works everywhere.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
h264: Factorize declaration of mb_sizes array.
vsrc_buffer: when no frame is available, return an error instead of segfaulting.
configure: add dl to frei0r extralibs.
dsputil x86: use SSE float instruction instead of SSE2 integer equivalent
dsputil x86: remove deprecated parameter from scalarproduct_int16 prototype
vp8dsp x86: perform rounding shift with a single instruction
fate: add BMP tests.
swscale: handle complete dimensions for monoblack/white.
aacenc: Mark deinterleave_input_samples argument as const.
vf_unsharp: Mark readonly variable as const.
h264: fix 4:2:2 PCM-macroblocks decoding
Conflicts:
configure
libavcodec/h264.h
libavcodec/x86/dsputil_mmx.c
libavfilter/vf_unsharp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (31 commits)
cdxl demux: do not create packets with uninitialized data at EOF.
Replace computations of remaining bits with calls to get_bits_left().
amrnb/amrwb: Remove get_bits usage.
cosmetics: reindent
avformat: do not require a pixel/sample format if there is no decoder
avformat: do not fill-in audio packet duration in compute_pkt_fields()
lavf: Use av_get_audio_frame_duration() in get_audio_frame_size()
dca_parser: parse the sample rate and frame durations
libspeexdec: do not set AVCodecContext.frame_size
libopencore-amr: do not set AVCodecContext.frame_size
alsdec: do not set AVCodecContext.frame_size
siff: do not set AVCodecContext.frame_size
amr demuxer: do not set AVCodecContext.frame_size.
aiffdec: do not set AVCodecContext.frame_size
mov: do not set AVCodecContext.frame_size
ape: do not set AVCodecContext.frame_size.
rdt: remove workaround for infinite loop with aac
avformat: do not require frame_size in avformat_find_stream_info() for CELT
avformat: do not require frame_size in avformat_find_stream_info() for MP1/2/3
avformat: do not require frame_size in avformat_find_stream_info() for AAC
...
Conflicts:
doc/APIchanges
libavcodec/Makefile
libavcodec/avcodec.h
libavcodec/h264.c
libavcodec/h264_ps.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/dsputil_mmx.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This splits ff_dsputil_init_mmx() into multiple functions, one for
each MMX/SSE level, somewhat simplifying the nested conditions.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master: (26 commits)
avconv: deprecate the -deinterlace option
doc: Fix the name of the new function
aacenc: make sure to encode enough frames to cover all input samples.
aacenc: only use the number of input samples provided by the user.
wmadec: Verify bitstream size makes sense before calling init_get_bits.
kmvc: Log into a context at a log level constant.
mpeg12: Pad framerate tab to 16 entries.
kgv1dec: Increase offsets array size so it is large enough.
kmvc: Check palsize.
nsvdec: Propagate errors
nsvdec: Be more careful with av_malloc().
nsvdec: Fix use of uninitialized streams.
movenc: cosmetics: Get rid of camelCase identifiers
swscale: more generic check for planar destination formats with alpha
doc: Document mov/mp4 fragmentation options
build: Use order-only prerequisites for creating FATE reference file dirs.
x86 dsputil: provide SSE2/SSSE3 versions of bswap_buf
rtsp: Remove some unused variables from ff_rtsp_connect().
avutil: make intfloat api public
avformat_write_header(): detail error message
...
Conflicts:
doc/APIchanges
doc/ffmpeg.texi
doc/muxers.texi
ffmpeg.c
libavcodec/kmvc.c
libavcodec/x86/Makefile
libavcodec/x86/dsputil_yasm.asm
libavcodec/x86/pngdsp-init.c
libavformat/movenc.c
libavformat/movenc.h
libavformat/mpegtsenc.c
libavformat/nsvdec.c
libavformat/utils.c
libavutil/avutil.h
libswscale/swscale.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
While pshufb allows emulating bswap on XMM registers for SSSE3, more
shuffling is needed for SSE2. Alignment is critical, so specific codepaths
are provided for this case.
For the huffyuv sequence "angels_480-huffyuvcompress.avi":
C (using bswap instruction): ~ 55k cycles
SSE2: ~ 40k cycles
SSSE3 using unaligned loads: ~ 35k cycles
SSSE3 using aligned loads: ~ 30k cycles
Signed-off-by: Diego Biurrun <diego@biurrun.de>
