The data of an attachment file is put into an AVCodecParameter's
extradata. The corresponding size field has type int, yet there was no
check for the size to fit into an int. As a consequence, it was possible
to create extradata with negative size (by using a big enough max_alloc).
Other errors were also possible: If SIZE_MAX < INT64_MAX (e.g. on 32bit
systems) then the file size might be truncated before the allocation;
and avio_read() takes an int, too, so one would not have read as much
as one desired.
Furthermore, the extradata is now padded as is required.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When QSV is enabled in FFmpeg, the command "ffmpeg -hwaccels" shows a
duplicate entry in acceleration methods for QSV:
Hardware acceleration methods:
vaapi
qsv
drm
opencl
qsv
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
PRId64 and PRIu64 already expand to the complete specifier; adding
another 'd' at the end is wrong and just leads to warnings that say
that only an option like '-frames:v 2d' will be used, although said
option won't be accepted at all ('Expected int64 for frames:v but found
2d').
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Each time the sub2video structure is initialized, the sub2video
subpicture is initialized together with the first received heartbeat.
The heartbeat's PTS is utilized as the subpicture start time.
Additionally, add some documentation on the stages.
It's a duplicate of the properly implemented nvdec libavcodec hwaccel
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes#8094.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -9223372036854775808 - 9223372036854775807 cannot be represented in type 'long'
Fixes: Ticket8142
Found-by: Suhwan
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For audio packets with dts != AV_NOPTS_VALUEs the dts was converted
twice to the muxer's timebase during streamcopy, once as a normal
packet and once specifically as an audio packet. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
fix crash when used the command like:
- ffmpeg -h protocol
- ffmpeg -h protocol=
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
After 06ec9c4746 we check for these
functions in configure (which will succeed in cygwin), but cmdutils.c
only includes windows.h if _WIN32 is defined (which it isn't in cygwin).
Retain the old intent from before 06ec9c4746,
that these functions only would be used when _WIN32 is defined, while
only using them if configure has agreed that they do exist.
Signed-off-by: Martin Storsjö <martin@martin.st>
Before this fix, ffmpeg -h full | grep map get the command dump
like:
-map [-]input_file_id[:stream_specifier][,sync_file_id[:stream_s set input stream mapping
^
|
truncated
after this fix, we can get full option dump.
Found-by: vacingfang <vacingfang@tencent.com>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
CPB side_data is copied when stream-copying (see init_output_stream_streamcopy()),
but it shall not be copied when the stream is decoded.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In these cases, we must pass the full path of the file to ffprobe
(as the current working dir on the remote system, e.g. when invoked
with "ssh remote ffprobe ..." isn't the wanted one).
The input filename passed to ffprobe is also included in the output,
which is part of the reference test data. Add a new option to
ffprobe to allow overriding what path is printed, to keep the
original relative path in the tests.
An alternative approach could be an option to allow requesting omitting
the file name from the dumped data, and updating the test references
accordingly.
Signed-off-by: Martin Storsjö <martin@martin.st>
These functions aren't available when building for the restricted
UWP/WinRT/WinStore API subsets.
Normally when building in this mode, one is probably only building
the libraries, but being able to build ffmpeg.exe still is useful
(and a ffmpeg.exe targeting these API subsets still can be run
e.g. in wine, for testing).
Signed-off-by: Martin Storsjö <martin@martin.st>
Freeing this was forgotten in ad899522.
Fixes#8315 and #8316.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
add error handle if av_asprintf return null.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
The "type" entry was hardcoded with an trailing comma, even if it was
the only entry in the section.
Fixes ticket #8228.
Signed-off-by: James Almer <jamrial@gmail.com>
do_streamcopy() has a packet that gets zero-initialized first, then gets
initialized via av_init_packet() after which some of its fields are
oerwritten again with the actually desired values (unless it's EOF): The
side data is copied into the packet with av_copy_packet_side_data() and
if the source packet is refcounted, the packet will get a new reference
to the source packet's data. Furthermore, the flags are copied and the
timestamp related fields are overwritten with new values.
This commit replaces this by using av_packet_ref() to both initialize
the packet as well as populate its fields with the right values (unless
it's EOF again in which case the packet will still be initialized). The
differences to the current approach are as follows:
a) There is no call to a deprecated function (av_copy_packet_side_data())
any more.
b) Several fields that weren't copied before are now copied from the source
packet to the new packet (e.g. pos). Some of them (the timestamp related
fields) may be immediately overwritten again and some don't seem to be
used at all (e.g. pos), but in return using av_packet_ref() allows to forgo
the initializations.
c) There was no check for whether copying side data fails or not. This
has been changed: Now the program is exited in this case.
Using av_packet_ref() does not lead to unnecessary copying of data,
because the source packets are already always refcounted (they originate
from av_read_frame()).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The option tables of the various fftools (in particular ffprobe) are
arrays of OptionDef; said type contains a union of a pointer to void and
a function pointer of type int (*)(void *, const char *, const char *)
as well as a size_t. Some entries (namely the common entry for writing a
report as well as several more of ffprobe's entries) used the pointer to
void to store a pointer to functions of type int (*)(const char *) or
type int (*)(const char *, const char *); nevertheless, when the functions
are actually called in write_option (in cmdutils.c), it is done via a
pointer of the first type.
There are two things wrong here:
1. Pointer to void can be converted to any pointer to incomplete or
object type and back; but they are nevertheless not completely generic
pointers: There is no provision in the C standard that guarantees their
convertibility with function pointers. C90 lacks a generic function
pointer, C99 made every function pointer a generic function pointer and
still disallows the convertibility with void *.
2. The signature of the called function differs from the signature
of the pointed-to type. This is undefined behaviour in C99 (given that
C90 lacks a way to convert function pointers at all, it doesn't say
anything about such a situation). It only works because none of the
functions this patch is about make any use of their parameters at all.
Therefore this commit changes the type of the relevant functions
to match the type used for the call and uses the union's function
pointer to store it. This is legal even in C90.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Respect default disposition when select audio/video
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
The implementation will use some default in this case. The empty string
is not a meaningful device for any existing hardware type, and indeed
OpenCL treats it identically to no device already to work around the lack
of this setting on the command line.
This patch improves the logs when the message "cur_dts is invalid" appears.
If helps to identify which stream generates the trouble,
and the status of the stream.
A lot of users suffers with the message, and the origin varies.
The improved message can help to discover the cause.
Signed-off-by: Andreas Hakon <andreas.hakon@protonmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Right now, the code check for no filter description, but if we use a
filter_complex, the code will use the AVFrame.duration which could be
wrong in case of using fps filter.
How to reproduce the problem:
ffmpeg -f lavfi -i testsrc=duration=1 -vf fps=fps=50 -vsync 1 -f null -
output 50 frames
ffmpeg -f lavfi -i testsrc=duration=1 -filter_complex fps=fps=50 -vsync 1 -f null -
output 51 frames
With this commit, the same command will always output 50 frames.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This way re-initializations properly update end_pts, enabling
sub2video_heartbeat to call sub2video_update as expected to re-init
the sub2video AVFrame's contents and to feed a frame into the filter
chain.
This then fixes memory usage ballooning due to framesync waiting
for secondary input in case of no actual subtitle samples being present
for a while in source after a re-init occurs.
Fully discarded streams can't be selected for output or mapped or filtered.
Previously, a few packets from such streams, probably buffered for
stream probing, would get smuggled into output files.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Previously if only -y was used then nothing happened, if only -x then zero
window height was set which is undefined in SDL and caused a black window.
From now on if only one dimension is set we calculate the other based on
size/aspect of the shown content.
Signed-off-by: Marton Balint <cus@passwd.hu>
PTS is in microseconds, so correct field name is out_time_us.
Old field out_time_ms kept for now - will be removed after a suitable transition
period.
Fixes#7345
Currently extra_hw_frames can't be applied to qsv since it
doesn't call function avcodec_get_hw_frames_parameters().
Give an option to fix ticket #7261 though it is not a perfect soultion
(allocate the minimum pool size internally and automatically).
Signed-off-by: Zhong Li <zhong.li@intel.com>
SDL from version 2.0.8 has support for full range YUV and specifying
BT601/BT709 color space for YUV->RGB conversion.
Signed-off-by: Marton Balint <cus@passwd.hu>
The input thread needs to be properly cleaned up and re-initalized before we
can start reading again in threaded mode. (Threaded input reading is used when
there is mode than one input file).
Fixes ticket #6121 and #7043.
Signed-off-by: Marton Balint <cus@passwd.hu>
Current ffplay code assumes that the read thread is in its main loop before any
key events are captured, but apparently on IOS even keypresses without a window
are forwared.
Fixes ticket #7252.
Signed-off-by: Marton Balint <cus@passwd.hu>
Regression since: af1761f7
Fixes: Division by 0
Fixes: ffmpeg_crash_1
Found-by: Thuan Pham, Marcel Böhme, Andrew Santosa and Alexandru Razvan Caciulescu with AFLSmart
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Forced key frames generation functionality was assuming the first PTS
value as zero, but, when 'copyts' is enabled, the first PTS can be any
big number. This was eventually forcing all the frames as key frames.
To resolve this issue, update has been made to use first input pts as
reference pts.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes stream field order written by avformat_write_header when "top"
option is specified on the command-line.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Temporarily keep the old method for ffmpeg_filters.c choose_pix_fmt and
avfiltergraph.c pick_format() until a paletted pixel format without alpha is
introduced.
Signed-off-by: Marton Balint <cus@passwd.hu>
Useful when transcoding videos at 29.97 fps because delivers a more accurate result for monitoring.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The -benchmark and -benchmark_all options now show user, system, and real time,
instead of just user time.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
SDL_QueryTexture and SDL_DestroyTexture require that the input texture
pointer be non-null. Debug builds of SDL will correctly check for this
and break program execution. This patch fixes this by checking the
status of the texture pointer.
Signed-off-by: Matt Oliver <protogonoi@gmail.com>
av_guess_sample_aspect_ratio() will return undefined or missing
value as {0,1}. This fixes show_stream() to check numerator to
display 'N/A' when appropriate. show_frame() does this already
correctly.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
This is used to signal that image should be stored in metadata
as cover image.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
PSEUDOPAL pixel formats are not paletted, but carried a palette with the
intention of allowing code to treat unpaletted formats as paletted. The
palette simply mapped the byte values to the resulting RGB values,
making it some sort of LUT for RGB conversion.
It was used for 1 byte formats only: RGB4_BYTE, BGR4_BYTE, RGB8, BGR8,
GRAY8. The first 4 are awfully obscure, used only by some ancient bitmap
formats. The last one, GRAY8, is more common, but its treatment is
grossly incorrect. It considers full range GRAY8 only, so GRAY8 coming
from typical Y video planes was not mapped to the correct RGB values.
This cannot be fixed, because AVFrame.color_range can be freely changed
at runtime, and there is nothing to ensure the pseudo palette is
updated.
Also, nothing actually used the PSEUDOPAL palette data, except xwdenc
(trivially changed in the previous commit). All other code had to treat
it as a special case, just to ignore or to propagate palette data.
In conclusion, this was just a very strange old mechnaism that has no
real justification to exist anymore (although it may have been nice and
useful in the past). Now it's an artifact that makes the API harder to
use: API users who allocate their own pixel data have to be aware that
they need to allocate the palette, or FFmpeg will crash on them in
_some_ situations. On top of this, there was no API to allocate the
pseuo palette outside of av_frame_get_buffer().
This patch not only deprecates AV_PIX_FMT_FLAG_PSEUDOPAL, but also makes
the pseudo palette optional. Nothing accesses it anymore, though if it's
set, it's propagated. It's still allocated and initialized for
compatibility with API users that rely on this feature. But new API
users do not need to allocate it. This was an explicit goal of this
patch.
Most changes replace AV_PIX_FMT_FLAG_PSEUDOPAL with FF_PSEUDOPAL. I
first tried #ifdefing all code, but it was a mess. The FF_PSEUDOPAL
macro reduces the mess, and still allows defining FF_API_PSEUDOPAL to 0.
Passes FATE with FF_API_PSEUDOPAL enabled and disabled. In addition,
FATE passes with FF_API_PSEUDOPAL set to 1, but with allocation
functions manually changed to not allocating a palette.
Allows to manage the AV_LOG_PRINT_LEVEL flag as a prefix to the loglevel
option value, similar to the existing AV_LOG_SKIP_REPEATE flag. Adds
support for setting flags relative to the existing value by using a +/-
prefix.
Previous version reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
avdevice_register_all() is still required to register devices into
lavf (this is required due to lavd being somewhat of a hack).
Signed-off-by: Josh de Kock <josh@itanimul.li>
With certain types of input and the filter chain getting re-initialized
or re-configured, multiple nullptr AVSubtitles can get pushed into
sub2video_update() in a row from sub2video_heartbeat.
This causes end_pts, and on the next round pts, to become INT64_MAX,
latter of which signals EOF in framesync, leading to complete loss of
subtitles from that point on.
Thus, check that the sub2video.end_pts is smaller than INT64_MAX
in a similar fashion to sub2video_flush before sending out the
nullptr AVSubtitle. This keeps premature EOFs from happening in
framesync and the subtitle overlay is kept past the filter chain
re-initializations/configurations.
The generic code should be able to finish the streams just fine initializing
and flushing the filters and codecs properly.
Fixes the following command:
ffmpeg -f lavfi -i "testsrc=d=0.1[out0];aevalsrc=0:d=0[out1]" -af apad -shortest -f framecrc -
Signed-off-by: Marton Balint <cus@passwd.hu>
Should prevent unnecessary copy of data in cases where new references
to the packet are created within the muxer or a bitstream filter.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
It's been a noop for years, and it's been argued that in-band headers
should not be forcedly removed without the user's explicit request.
Also, as the FIXME line stated, this is a job for a bitstream filter
like extract_extradata, remove_extradata, dump_extradata, and
filter_units.
Signed-off-by: James Almer <jamrial@gmail.com>
When a decoded stream is being looped, after each post-EOF rewind,
decoders are flushed in seek_to_start(). This only drains 1 frame, and
thus the output has a few frames missing at the tail of each iteration
except the last.
With this patch, process_input is looped till process_input_packet
reaches EOF.
Fixes#7081
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Support dump bit stream filter option in ffmpeg -h full and
ffmpeg -h bsf=FooBar.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes a regression since 2a88ebd096 which caused
an infinite loop in the subtitle decoding.
Fixes ticket #6796.
Signed-off-by: Marton Balint <cus@passwd.hu>
ffmpeg -h display "max_error_rate" option help information have
been cut off, the root cause is used a wrong initial order.
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit cdc78058c7.
It introduced several issues in the command line tools, and it's
implementing a new API that may still see some changes.
Revert for the time being until the state of the API is defined.
Signed-off-by: James Almer <jamrial@gmail.com>
coded_width/height are unnitialized and will be overwritten by
dec_ctx->width/height in avcodec_open2()
This fixes tiket #6958.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: James Almer <jamrial@gmail.com>
On systems which deliver SIGPIPE (Unices), a broken pipe will currently
result in the immediate termination of the ffmpeg process (the default
disposition as required by POSIX). This is undesirable, because while
the broken pipe is likely fatal to useful cleanup of whatever component
is writing to it, there might be other components which can do useful
cleanup - for example, a muxer on another stream may still need to write
indexes to complete a file. Therefore, set the signal disposition for
SIGPIPE to ignore the signal - the call which caused the signal will
fail with EPIPE and the error will be propagated upwards like any other
I/O failure on a single stream.
The function avformat_alloc_context() will return a NULL pointer on
failure. However, in function read_ffserver_streams(), its return value
is not validated and the subsequent dereference may result in a bad
memory access bug. Check its return value against NULL and avoid
potential NULL dereference.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
