Some legacy applications such as AVI2MVE expect raw RGB bitmaps
to be stored bottom-up, whereas our RIFF BITMAPINFOHEADER assumes
they are always stored top-down and thus write a negative value
for height. This can prevent reading of these files.
Option flipped_raw_rgb added to AVI and Matroska muxers
which will write positive value for height when enabled.
Note that the user has to flip the bitmaps beforehand using other
means such as the vflip filter.
Converting explicit avio_flush() calls helps us to buffer more data and avoid
flushing the IO context too often which causes reduced IO throughput for
non-streamed file output.
The user can control FLUSH_POINT flushing behaviour using the -flush_packets
option, the default typically means to flush unless a non-streamed file output
is used, so this change should have no adverse effect on streaming even if it
is assumed that after an avio_flush() the output buffer is clean so small
seekbacks within the output buffer will work even when the IO context is not
seekable.
Signed-off-by: Marton Balint <cus@passwd.hu>
These instances are simply redundant or present because avio_flush() used to be
required before doing a seekback. That is no longer the case, aviobuf code does
the flush automatically on seek.
This only affects code which is either disabled for streaming IO contexts or
does no seekbacks after the flush, so this change should have no adverse effect
on streaming.
Signed-off-by: Marton Balint <cus@passwd.hu>
To make it consistent with other muxers.
The user can still control the generic flushing behaviour after write_header
(same way as after packets) using the -flush_packets option, the default
typically means to flush unless a non-streamed file output is used.
Therefore this change should have no adverse effect on streaming, even if it is
assumed that the first packet has a clean buffer, so small seekbacks within the
output buffer work even when the IO context is not seekable.
Signed-off-by: Marton Balint <cus@passwd.hu>
It is not uncommon to find code where the caller thinks to know better
what the return value should be than the callee. E.g. something like
"if (av_new_packet(pkt, size) < 0) return AVERROR(ENOMEM);". This commit
changes several instances of this to instead forward the actual error.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
libavutil/parseutils.h has been included in 22bbd6e8 for av_parse_time()
and the header has not been removed when said function was replaced by
ff_parse_creation_time_metadata() in ea1bf08a.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It is supposed to be a flag. The only currently defined value is
AVIO_SEEKABLE_NORMAL, but other ones may be added in the future.
However all the current lavf code treats this field as a bool (mainly
for historical reasons).
Change all those cases to properly check for AVIO_SEEKABLE_NORMAL.
The header was never installed and the function is only used in libavformat
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Store the file duration in the same timebase it arrives (i.e.
milliseconds) and only convert it to the file duration units (100ns)
when it's actually written, thus simplifying some calculations. Also,
store the duration as unsigned, since it cannot be negative.
CC: libav-stable@libav.org
Bug-ID: CVE-2016-2326
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
Improves streaming compatibility with Windows Media Services. Also tested for
compatilbility in Windows Media Player, Windows Media ASF Viewer and VLC.
This version of the patch only writes exclusion among audio streams, therefore
choosing a subtitle language should be possible independently of audio language.
Signed-off-by: Marton Balint <cus@passwd.hu>
This can provide a manual workaround for ticket #4230.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
Checked compatiblity with VLC, Windows Media Player 12 and Windows Media ASF
Viewer 9 series.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit 'b08569a23948db107e5e6175cd4c695427d5339d':
lavf: Replace the ASF demuxer
Conflicts:
Changelog
libavformat/asf.h
libavformat/asfdec.c
libavformat/version.h
tests/ref/fate/wmv8-drm-nodec
tests/ref/seek/lavf-asf
The rewritten demuxer is placed in a new file, the current demuxer is
left as default. Carl has tested both and the one working better is
default.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The old one is the result of the reverse engineering and guesswork.
The new one has been written following the now-available specification.
This work is part of Outreach Program for Women Summer 2014 activities
for the Libav project.
The fate references had to be changed because the old demuxer truncates
the last frame in some cases, the new one handles it properly.
The seek-test reference is changed because seeking works differently
in the new demuxer. When seeking, the packet is not read from the stream
directly, but it is rather constructed by the demuxer. That is why
position is -1 now in the reference.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '6072184e702b4b631ac72f1b66b75e5f21e0ce2d':
asfenc: use codec descriptors instead of AVCodecs to write codec info
Conflicts:
tests/ref/lavf/asf
tests/ref/seek/lavf-asf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also, stop using AVCodecContext.codec_name as fallback, since it will be
deprecated.
Changes the result of the lavf-asf test (and its associated seektest),
since 'msmpeg4v3' gets written instead of just 'msmpeg4'.
Partially undoes commit 2c4e08d893:
riff: always generate a proper WAVEFORMATEX structure in
ff_put_wav_header
A new flag, FF_PUT_WAV_HEADER_FORCE_WAVEFORMATEX, is added to force the
use of WAVEFORMATEX rather than PCMWAVEFORMAT even for PCM codecs.
This flag is used in the Matroska muxer (the cause of the original
change) and in the ASF muxer, because the specifications for
these formats indicate explicitly that WAVEFORMATEX should be used.
Muxers for other formats will return to the original behavior of writing
PCMWAVEFORMAT when writing a header for raw PCM.
In particular, this causes raw PCM in WAV to generate the canonical
44-byte header expected by some tools.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '09f3c937ed6fd7c5bd64450d45f73b0f4975f4c9':
asfenc: remember send time and offset of the index entries
Conflicts:
libavformat/asfenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
ASF markers only have a start time, so we lose the chapter end times,
but that is ASF for you
Signed-off-by: Vladimir Pantelic <vladoman@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
