Add -tile_rows and -tile_cols option to specify the number of tile rows
and columns for ICL+ (gen 11) platform.
A tile must wholly contain all the slices within it. Slices cannot cross
tile boundaries. So the slice number would be implicitly resized to the
max(nSlice, nTile).
Example:
ffmpeg -v verbose -hwaccel qsv -init_hw_device qsv=hw
-filter_hw_device hw -f rawvideo -s:v 1920x1080 -i ./input.nv12 -vf
format=nv12,hwupload=extra_hw_frames=64 -c:v hevc_qsv -tile_rows 2
-tile_cols 2 -slices 4 -y output.h265
Also dump the actual quantity of encoded tiled rows and columns in run
time.
Fix the enhancement #8400.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
1. must enable low_power mode since just VDENC can be supported by iHD
driver right now
2. Coding option1 and extra_data are not supported by MSDK
3. IVF header will be inserted in MSDK by default, but it is not needed
for FFmpeg, so disable it.
Signed-off-by: Zhong Li <zhongli_dev@126.com>
MSDK does not create internal acceleration device on Linux,
So MFXVideoCORE_SetHandle() is necessary.
It has been added for ff_qsv_init_session_device().
But missed for ff_qsv_init_internal_session() due to commit
1f26a23 overwrited commit db89f45Fix#7030
Signed-off-by: Zhong Li <zhong.li@intel.com>
GPB is the default type, just contains forward references but the
slice_type is B slice with higher encoding efficiency than regular P
slice, but lower performance.
Add an option to allow user to set regular P slice.
Fix ticket#6870
Test data on Intel Kabylake (i7-7567U CPU @ 3.50GHz):
1. ffmpeg -hwaccel qsv -c:v h264_qsv -i bbb_sunflower_1080p_30fps_normal.mp4 -vsync passthrough
-vframes 1000 -c:v hevc_qsv -gpb 0 -bf 0 -q 25 test_gpb_off_bf0_kbl.mp4
transcoding fps: 85
encoded file size of test_gpb_off_bf0_kbl.mp4: 21960100 (bytes)
2. ffmpeg -hwaccel qsv -c:v h264_qsv -i bbb_sunflower_1080p_30fps_normal.mp4 -vsync passthrough
-vframes 1000 -c:v hevc_qsv -gpb 1 -bf 0 -q 25 test_gpb_on_bf0_kbl.mp4
transcoding fps: 79
encoded file size oftest_gpb_on_bf0_kbl.mp4: 21211449 (bytes)
In this case, enable gpb can bring about 7% performance drop but 3.4% encoding efficiency improvment.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Always exposes low_power option for all qsv encoder, and reports a warning
if VDENC is not supported in current version of MSDK.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
There are many problems of current qsv trellis option:
1. Duplicated with AVCodecContext definition
2. MFX_TRELLIS_XXX is introduced by MSDK API 1.17
Currently Without MSDK API checking thus may cause compilation issue.
3. user is inclined to enable trellis when set "-trellis 1", but
actually it is to disable since MFX_TRELLIS_OFF is equal to 1.
4. It is too complex for user to enable trellis for every frame(I/P/B).
Just simply remove the private option, and switch to the AVCodecContext
definition. Compatibility should not a big problem (except can't exact map)
since the option name is same as AVCodecContext.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Reviewed-by: Moritz Barsnick <barsnick@gmx.net>
QVBR mode is to use the variable bitrate control algorithm
with constant quality.
mfxExtCodingOption3 should be supported to enable QVBR mode.
It is neccesary to specify a max_rate for QVBR, else it may be ICQ mode.
Example usage: ffmpeg -hwaccel qsv -c:v h264_qsv -i input.mp4 -c:v
h264_qsv -global_quality 25 -maxrate 2M test_qvbr.mp4 -v verbose
Clip QVBR quality range to be [0, 51] as Mark's commments.
It is similar to qp range of CQP but possibly should be updated when VP8/VP9
encoding can be supported.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Add VDENC(lowpower mode) support for QSV H264
It's an experimental function(like lowpower in vaapi) with
some limitations:
- CBR/VBR require HuC which should be explicitly loaded via i915
module parameter(i915.enable_guc=2 for linux kernel version >= 4.16)
Use option "-low_power 1" to enable VDENC.
Add in dump_video_param() to show the status of VDENC in runtime log.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
RepeatPPS is enabled by default in mfx. It is not necessary mostly and
wasting encoding bits.
Add an option to control it and disable it by default.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Zhong Li <zhong.li@intel.com>
This option can be used to repect original input I/IDR frame type.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Add fix a memory leak issue as James's comments.
V2: use a local pict_type since coded_frame is deprecated.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Current implementations of qsv components incorrectly work with async level, they
actually try to work in async+1 level stepping into MFX_WRN_DEVICE_BUSY and polling
loop. This change address this misbehaviour.
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Maxym Dmytrychenko <maxim.d33@gmail.com>
Cc: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
1. vcm mode is only available for H264.
2. vcm is not supported on Linux, but it is shown when run "./avconv -h
encoder=h264_qsv |grep vcm". This shouldn't happen.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
MFX_LOOKAHEAD_DS_UNKNOWN means auto.
-1 is not a valid value.
Signed-off-by: Ruiling Song <ruiling.song@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
AVBR is supported from API 1.3 but only available for Windows
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Moving option definition to h264 implementation and fixing command line defaults
in order to properly respect cavlc input value
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Purpose: qsvenc: make sure that interlaced encoding works. Also,
reduce the vertical alignment constraint when possible to reduce
memory usage.
Note: Most of this code used to be present in ffmpeg and was
eliminated in revision 1f26a23 on Oct. 31, 2016 (qsv: Merge libav
implementation, at
https://github.com/FFmpeg/FFmpeg/commit/1f26a231bb065276cd80ce02957c759f3197
edfa#diff-7d84a34d58597bb7aa4b8239dca1f9f8). Already applied to
libav.
Reviewed-by: Luca Barbato <lu_zero@gentoo.org>
(cherry picked from commit 8fd8f91e47)
Signed-off-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Aaron Levinson <alevinsn@aracnet.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Merged as-at libav 398f015, and therefore includes outstanding
skipped merges 04b17ff and 130e1f1.
All features not in libav are preserved, and no options change.
The b_frame_strategy option is only used by mpegvideoenc, qsv, x264, and
xavs, while b_sensitivity is only used by mpegvideoenc.
These are very codec-specific options, so deprecate the global variants.
Set proper limits to the maximum allowed values.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Will Kelleher <wkelleher@gogoair.com>
Previous version reviewed-by: Ivan Uskov <ivan.uskov@nablet.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '4d8f536b535487063a08609636e712ad86d2ad54':
qsvenc: print the actual video parameters used by MSDK
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
