Intel MediaSDK and oneVPL expect continuous allocation for data[i],
however there are mandatory padding bytes between data[i] and data[i+1].
when calling av_frame_get_buffer. This patch removes all extra padding
bytes.
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The data copy is unnecessary for packed formats when frame width and
height are aligned
For example:
$ ffmpeg -f lavfi -i testsrc=size=1920x1088 -vf "format=yuyv422" -c:v hevc_qsv -f null -
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
MSDK/VPL uses 420 chroma format as default to encode RGB, and this is
not a proper usage. Now enable 444 encoding for RGB input by default.
When main profile is used, RGB input is still encoded in 420 format.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
According to https://github.com/Intel-Media-SDK/MediaSDK/blob/master/doc/mediasdk-man.md#configuration-change.
Before calling MFXVideoENCODE_Reset, The application needs to retrieve
any cached frames in the SDK encoder.
A loop is added before MFXVideoENCODE_Reset to retrieve cached frames
and add them to async_fifo, so that dynamic configuration works when
async_depth > 1.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
When encode RGB frame, Intel driver convert RGB to YUV, so we cannot
set RGB colorspace to VPL/MSDK.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Hyper Encode uses Intel integrated and discrete graphics on one system
to accelerate encoding of a single video stream.
Depending on the selected parameters and codecs, performance gain on AlderLake iGPU + ARC Gfx up to 1.6x.
More information: https://www.intel.co.uk/content/www/uk/en/architecture-and-technology/adaptix/deep-link.html
Developer guide: https://github.com/oneapi-src/oneVPL-intel-gpu/blob/main/doc/HyperEncode_FeatureDeveloperGuide.md
Hyper Encode is supported only on Windows and requires D3D11 and oneVPL.
To enable Hyper Encode need to specify:
-Hyper Encode mode (-dual_gfx on or dual_gfx adaptive)
-Encoder: h264_qsv or hevc_qsv
-BRC: VBR, CQP or ICQ
-Lowpower mode (-low_power 1)
-Closed GOP for AVC or strict GOP for HEVC -idr_interval = 0 used by default
Depending on the encoding parameters, the following parameters may need
to be adjusted:
-g recommended >= 30 for better performance
-async_depth recommended >= 30 for better performance
-extra_hw_frames recommended equal to async_depth value
-bf recommended = 0 for better performance
In the cases with fast encoding (-preset veryfast) there may be no
performance gain due to the fact that the decode is slower than the encode.
Command line examples:
ffmpeg.exe -init_hw_device qsv:hw,child_device_type=d3d11va,child_device=0 -v verbose -y -hwaccel qsv -extra_hw_frames 60 -async_depth 60 -c:v h264_qsv -i bbb_sunflower_2160p_60fps_normal.mp4
-async_depth 60 -c:v h264_qsv -preset medium -g 60 -low_power 1 -bf 0 -dual_gfx on output.h265
Signed-off-by: galinart <artem.galin@intel.com>
adaptive_i and adaptive_b cannot work with MFX_GOP_STRICT,
so only enable MFX_GOP_STRICT when these features are disabled.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Add skip_frame support to qsvenc. Use per-frame metadata
"qsv_skip_frame" to control it. skip_frame option defines the behavior
of qsv_skip_frame.
no_skip: Frame skipping is disabled.
insert_dummy: Encoder inserts into bitstream frame where all macroblocks
are encoded as skipped.
insert_nothing: Similar to insert_dummy, but encoder inserts nothing.
The skipped frames are still used in brc. For example, gop still include
skipped frames, and the frames after skipped frames will be larger in
size.
brc_only: skip_frame metadata indicates the number of missed frames
before the current frame.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Without this change, MSDK/VPL always defaults the HEVC tier to MAIN if the -level is specified.
Also, according to the HEVC specs, only level >= 4 can support High Tier.
Signed-off-by: nyanmisaka <nst799610810@gmail.com>
The next commit and other commits in future will use more ExtParam
buffers.
And combine 2 free functions into single one
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
qsvenc makes a copy when the input in system memory is not padded as the
SDK requires, however the padding area is not filled with right data
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Currently AVBR is disabled and VBR is the default method if maxrate is
not specified on Linux, but AVBR is the default one if maxrate is not
specified on Windows. In order to make user experience better accross
Linux and Windows, use VBR by default on Windows if maxrate is not
specified. User need to set both avbr_accuracy and avbr_convergence to
non-zero explicitly and not to specify maxrate if AVBR is expected.
In addition, AVBR works for H264 and HEVC only in the SDK.
$ ffmpeg.exe -v verbose -f lavfi -i yuvtestsrc -vf "format=nv12" -c:v
vp9_qsv -f null -
Add adaptive_i/b feature to hevc_qsv. Adaptive_i allows changing of
frame type from P and B to I. Adaptive_b allows changing of frame type
frome B to P.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The following Cflags has been added to libmfx.pc, so mfx/ prefix is no
longer needed when including mfx headers in FFmpeg.
Cflags: -I${includedir} -I${includedir}/mfx
Some old versions of libmfx have the following Cflags in libmfx.pc
Cflags: -I${includedir}
We may add -I${includedir}/mfx to CFLAGS when running 'configure
--enable-libmfx' for old versions of libmfx, if so, mfx headers without
mfx/ prefix can be included too.
If libmfx comes without pkg-config support, we may do a small change to
the settings of the environment(e.g. set -I/opt/intel/mediasdk/include/mfx
instead of -I/opt/intel/mediasdk/include to CFLAGS), then the build can
find the mfx headers without mfx/ prefix
After applying this change, we won't need to change #include for mfx
headers when mfx headers are installed under a new directory.
This is in preparation for oneVPL support (mfx headers in oneVPL are
installed under vpl directory)
Using parameter from AVCodecContext to reset qsv codec is more suitable
for MFXVideoENCODE_Reset()'s usage. Per-frame metadata is more suitable
for the usage of mfxEncodeCtrl being passed to
MFXVideoENCODE_EncodeFrameAsync(). Now change it to use the value
from AVCodecContext.
Because q->param is passed to both "in" and "out" parameters when call
MFXVideoENCODE_Query(), the value in q->param may be changed. New
variables are added to store old configuration, so that we can detect
real parameter change.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Dividing one line log into several av_log() call is not thread safe. Now
merge these strings into one av_log() call.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Enable dynamic QP configuration in runtime on qsv encoder. Through
AVFrame->metadata, we can set key "qsv_config_qp" to change QP
configuration when we encode video in CQP mode.
Signed-off-by: Yue Heng <yue.heng@intel.com>
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Use The mfxEncoderCtrl parameter to enable ROI. Get side data
"AVRegionOfInterest" and use it to configure "mfxExtEncoderROI" which is
the MediaSDK's ROI configuration.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
To do more accurate QP control, add min/max QP control on I/P/B frame
separately to qsv encoder. qmax and qmin still work but newly-added
options have higher priority.
Signed-off-by: Yue Heng <yue.heng@intel.com>
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
libmfx 1.28 was released 3 years ago, it is easy to get a greater
version than 1.28. We may remove lots of compile-time checks if adding
the requirement for the minimal version in the configure script.
Reviewed-by: softworkz <softworkz@hotmail.com>
Signed-off-by: Jean-Baptiste Kempf <jb@videolan.org>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>