Assertion avctx->codec_id != AV_CODEC_ID_NONE failed at src/libavcodec/parser.c:128
The setting on the internal AVCodecContext used for parsing only is
otherwise irrelevant, so just set it to avoid the assert.
Flush the buffered data in libmfx before video param reinit
in case the frames drop.
Cache the first frame causing the reinit and decode zero-size
pkt to flush the buffered pkt before reinit. After all the
buffered pkts being flushed, resume to reinit and decode.
Fix the issue in ticket #7399.
[V2]: Move the definition of zero_pkt to where it is exactly
used.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Current implementations of qsv components incorrectly work with async level, they
actually try to work in async+1 level stepping into MFX_WRN_DEVICE_BUSY and polling
loop. This change address this misbehaviour.
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Maxym Dmytrychenko <maxim.d33@gmail.com>
Cc: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
* commit '54307b35311e9a871b3d8ecb2b2eecfc16de0163':
lavc/qsvdec: set complete_frame flags for progressive picture
Merged-by: James Almer <jamrial@gmail.com>
Set the flag MFX_BITSTREAM_COMPLETE_FRAME when it is a progressive picture.
This can fix vc1 decoding segment fault issues because can't set the start
code correctly.
See: ./avconv -hwaccel qsv -c:v vc1_qsv -i /fate-suite/vc1/SA00040.vc1
-vf "hwdownload, format=nv12" -f rawvideo /dev/null
v2: fix some h264 interlaced clips regression
a. field_order of some h264 interlaced video (e.g: cama3_vtc_b.avc) is marked as AV_FIELD_UNKNOWN
in h264_parser.c. This is not a completed frames.
So only set the MFX_BITSTREAM_COMPLETE_FRAME when it is progressive.
b. some clips have both progressive and interlaced frames (e.g.CAPAMA3_Sand_F.264),
the parsed field_order maybe changed druing the decoding progress.
This patch has been verified for other codecs(mpeg2/hevc/vp8).
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Currently pict_type and key_frame are unset.
Add an extra param to fetch the picture type from qsv decoder
The judgement “key frame is equal to IDR frame” only suitable for H264.
For HEVC, all IRAP frames are key frames, and other codecs have no IDR
frame.
Signed-off-by: ChaoX A Liu <chaox.a.liu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Fix a common vp8 decoding failure.
Many vp8 clips cannot decode if hw_frames_ctx is enabled, reporting
"Error during QSV decoding.: incompatible video parameters (-14)".
It is due to mfx.FrameInfo.Width/Height not matching coded_w/coded_h.
See: avconv -hwaccel qsv -init_hw_device qsv -c:v vp8_qsv -i vp8-test-vectors-r1/vp80-00-comprehensive-001.ivf
-vf "hwdownload,format=nv12" -pix_fmt yuv420p -f md5 -
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'cbe28bc069dde1d53d937ee10700bb123279c7c8':
qsv: better to use alignment by 16 and HEVC 10b requires alignment by 32
Merged-by: Mark Thompson <sw@jkqxz.net>
This includes a pointer to the associated hwaccel for decoders using
hwaccels - these will be used later to implement the hwaccel setup
without needing a global list.
Also added is a new file listing all hwaccels as external declarations -
this will be used later to generate the hwaccel list at configure time.
This includes a pointer to the associated hwaccel for decoders using
hwaccels - these will be used later to implement the hwaccel setup
without needing a global list.
Also added is a new file listing all hwaccels as external declarations -
this will be used later to generate the hwaccel list at configure time.
* commit '0940b748bdba36c4894fc8ea6be631d821fdf578':
qsvdec: Only warn about unconsumed data if it happens more than once
Merged-by: James Almer <jamrial@gmail.com>
* commit '00aeedd84105a17f414185bd33ecadebeddb3a27':
qsv{dec,enc}: use a struct as a memory id with internal memory allocator
Merged-by: Mark Thompson <sw@jkqxz.net>
* commit '404e51478ecad060249d5b9bee6ab39a8a9d8c1c':
qsv{dec,enc}: always use an internal mfxFrameSurface1
Minor fixups for differences in the QSV encoder because of a53cc.
Merged-by: Mark Thompson <sw@jkqxz.net>
* commit '801ac7156d3efb8e088fb6024f568eb36a293887':
qsv: Be informative when reporting that no data has been consumed
Merged-by: Clément Bœsch <u@pkh.me>
* commit 'e328178da90f44690e0076f4dbfd16da9175f441':
qsvdec: only access hwaccel_context is the pixel format is QSV
Merged-by: Clément Bœsch <u@pkh.me>
Introducing enforced sync points in arbitrary places is bad for
performance. Since the vast majority of receiving code (QSV VPP or
encoders, retrieving frames through hwcontext) will do the syncing, this
change should not be visible to most callers. But bumping micro just in
case.
This is also consistent with what VAAPI hwaccel does.
This was correct for H.26[45], because libmfx uses the same values
derived from profile_idc and the constraint_set flags, but it is
wrong for other codecs.
Also avoid passing FF_LEVEL_UNKNOWN (-99) as the level, as this is
certainly invalid.
* commit '924e2ecd2b7d51cca60c79351ef16b04dd4245c3':
qsvdec: when a frames ctx is supplied, use its frame dimensions
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '92736c74fb1633e36f7134a880422a9b7db14d3f':
qsvdec: add support for P010 (10-bit 420) decoding
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'ce320cf1c4daab3e2e3726ed7d2e879d10f7b991':
qsvdec: use the same mfxFrameInfo for allocating frames that was passed to DECODE_Init
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '536bb17e9659c5ed7576a218d4085cdd6d5742fa':
qsvdec: make ff_qsv_map_pixfmt() return a MFX fourcc as well
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This will allow implementing the allocator more fully, which is needed
by the HEVC encoder plugin with video memory input.
Signed-off-by: Maxym Dmytrychenko <maxym.dmytrychenko@intel.com>
For encoding, this avoids modifying the input surface, which we are not
allowed to do.
This will also be useful in the following commits.
Signed-off-by: Maxym Dmytrychenko <maxym.dmytrychenko@intel.com>
Merged as-at libav 398f015, and therefore includes outstanding
skipped merges 04b17ff and 130e1f1.
All features not in libav are preserved, and no options change.
* commit '32c8359093d1ff4f45ed19518b449b3ac3769d27':
lavc: export the timestamps when decoding in AVFrame.pts
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This patch fixes the h264_qsv decoder issues mentioned
in https://ffmpeg.zeranoe.com/forum/viewtopic.php?t=2962.
The patch may be tested by specifying h264_qsv as the decoder to ffplay
for an h264 encoded file.
ffplay -vcodec h264_qsv foo.mts
Signed-off-by: Yuli Khodorkovskiy <ykhodo@gmail.com>
Push requested-by: Ivan Uskov
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit d30cf57a7b2097b565db02ecfffbdc9c16423d0e, reversing changes made to
acc155ac55baa95d1c16c0364b02244bc04d83a8. The commit d30cf57a7b2097b565db02ecfffbdc9c16423d0e
provided irrelevant code complexity and decoding slowdown. But the main disadvantage of this
commit is a decoder crash. So it should be reverted.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
