Use 8 packets/frames by default rather than 1, which seems to provide
better throughput.
Allow -thread_queue_size to set the muxer queue size manually again.
Finishes fixing vp5/potter512-400-partial.avi
The fate-matroska-ms-mode test ref is updated to reflect that the Speex decoder
can now read the stream.
Signed-off-by: James Almer <jamrial@gmail.com>
Covers muxing from raw pcm audio input into FLAC, using several scalable layouts,
and demuxing the result.
Signed-off-by: James Almer <jamrial@gmail.com>
This is the 64bit version of Chris Doty-Humphreys SFC64
Compared to the LCGs these produce much better quality numbers.
Compared to LFGs this needs less state. (our LFG has 224 byte
state for its 32bit version) this has 32byte state
Also the initialization for our LFG is slower.
This is also much faster than KISS or PCG.
This commit replaces the broken LCG used before.
(broken as it had only a period ~200M due to being put in a double)
This changes the output from random() which is why libswresample.mak
is updated, update was done using the command in libswresample.mak
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
On some platforms (in particular, ARM/AArch64), the implementation
of AV_READ_TIME() may use a privileged instruction - in such
cases, benchmarking just fails with a SIGILL.
Instead of crashing, try executing AV_READ_TIME() once within
a region with the signal handler active, to allow gracefully
informing the user about the issue.
This matches the dav1d checkasm commit
95a192549a448b70d9542e840c4e34b60d09b093.
Signed-off-by: Martin Storsjö <martin@martin.st>
Parse iprp and iinf boxes and its child boxes to get the actual codec used
(AV1 for avif, HEVC for heic), and properly export extradata and other
properties in a generic way.
The avif tests reference files are updated as the extradata is now exported.
Based on a patch by Swaraj Hota
Co-authored-by: Swaraj Hota <swarajhota353@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Marth64 <marth64@proxyid.net>
Raw Captions With Time (RCWT) is a format native to ccextractor, a commonly
used open source tool for processing 608/708 closed caption (CC) sources.
It can be used to archive the original, raw CC bitstream and to produce
a source file file for later CC processing or conversion. As a result,
it also allows for interopability with ccextractor for processing CC data
extracted via ffmpeg. The format is simple to parse and can be used
to retain all lines and variants of CC.
A free specification of RCWT can be found here:
https://github.com/CCExtractor/ccextractor/blob/master/docs/BINARY_FILE_FORMAT.TXT
This muxer implements the specification as of 01/05/2024, which has
been stable and unchanged for 10 years as of this writing.
This muxer will have some nuances from the way that ccextractor muxes RCWT.
No compatibility issues when processing the output with ccextractor
have been observed as a result of this so far, but mileage may vary
and outputs will not be a bit-exact match.
Specifically, the differences are:
(1) This muxer will identify as "FF" as the writing program identifier, so
as to be honest about the output's origin.
(2) ffmpeg's MPEG-1/2, H264, HEVC, etc. decoders extract closed captioning
data differently than ccextractor from embedded SEI/user data.
For example, DVD captioning bytes will be translated to ATSC A53 format.
This allows ffmpeg to handle 608/708 in a consistant way downstream.
This is a lossless conversion and the meaningful data is retained.
(3) This muxer will not alter the extracted data except to remove invalid
packets in between valid CC blocks. On the other hand, ccextractor
will by default remove mid-stream padding, and add padding at the end
of the stream (in order to convey the end time of the source video).
This replaces the riscv specific handling from
7212466e73 (which essentially is
reverted), with a different implementation of the same (plus a bit
more), based on the corresponding feature in dav1d's checkasm,
supporting both Unix and Windows.
See in particular the dav1d commits
0b6ee30eab2400e4f85b735ad29a68a842c34e21,
0421f787ea592fd2cc74c887f20b8dc31393788b,
8501a4b20135f93a4c3b426468e2240e872949c5 and
d23e87f7aee26ddcf5f7a2e185112031477599a7, authored by Henrik Gramner.
The overall approach compared to the existing implementation for
riscv is the same; set up a signal handler, store the state with
sigsetjmp, jump out of the crashing function with siglongjmp.
The main difference is in what happens when the signal handler
is invoked. In the previous implementation, it would resume from
right before calling the crashing function, and then skip that call
based on the setjmp return value.
In the imported implementation from dav1d, we return to right before
the check_func() call, which will skip testing the current function
(as the pointer is the same as it was before).
Other differences are:
- Support for other signal handling mechanisms (Windows
AddVectoredExceptionHandler)
- Using RtlCaptureContext/RtlRestoreContext instead of setjmp/longjmp
on Windows with SEH
- Only catching signals once per function - if more than one
signal is delivered before signal handling is reenabled, any
signal is handled as it would without our handler
- Not using an arch specific signal handler written in assembly
Signed-off-by: Martin Storsjö <martin@martin.st>
The layout for the frame flags is as follow:
chroma_format u(2)
reserved u(2)
interlace_mode u(2)
reserved u(2)
chroma_format has 2 allowed values:
0: reserved
1: reserved
2: 4:2:2
3: 4:4:4
interlace_mode has 3 allowed values:
0: progressive
1: tff
2: bff
3: reserved
0x80 is what we expect for "422 not interlaced", and the extra 0x2 from
0x82 is actually writing into the reserved bits.
This byte represents 4 reserved bits followed by 4 alpha_channel_type bits.
alpha_channel_type currently has 3 differents defined values: 0 (no
alpha), 1 (8b alpha), and 2 (16b alpha), all the other values are
reserved. The 4 initial reserved bits are expected to be 0.
This byte represents 4 reserved bits followed by 4 alpha_channel_type bits.
alpha_channel_type currently has 3 differents defined values: 0 (no
alpha), 1 (8b alpha), and 2 (16b alpha), all the other values are
reserved. This part is correctly written (alpha_bits>>3 does the correct
thing), but the 4 initial bits are reserved.
Quoting SMPTE RDD 36:2015:
A decoder shall abort if it encounters a bitstream with an unsupported
bitstream_version value. If 0, the value of the chroma_format syntax
element shall be 2 (4:2:2 sampling) and the value of the
alpha_channel_type element shall be 0 (no encoded alpha); if 1, any
permissible value may be used for those syntax elements.
So if we're not in 4:2:2 or if there is alpha, we are not allowed to use
version 0.
They are similar to AVIF images (both use the HEIF container).
The only additional work needed is to parse the hvcC box and put
it in the extradata.
With this patch applied, ffmpeg (when built with an HEVC decoder)
is able to decode the files in
https://github.com/nokiatech/heif/tree/gh-pages/content/images
Also add a couple of fate tests with samples from
https://github.com/nokiatech/heif_conformance/tree/master/conformance_files
Partially fixes trac ticket #6521.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The start code is matched against 0x000001, zero_byte was treated
as last byte of last frame rather than the beginning of next frame.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Motivated by YUVJ removal. This change will allow full negotiation
between color ranges and matrices as needed. By default, all ranges and
matrices are marked as supported.
Because grayscale formats are currently handled very inconsistently (and
in particular, assumed as forced full-range by swscale), we exclude them
from negotiation altogether for the time being, to get this API merged.
After filter negotiation is available, we can relax the
grayscale-is-forced-jpeg restriction again, when it will be more
feasible to do so without breaking a million test cases.
Note that this commit updates one FATE test as a consequence of the
sanity fallback for non-YUV formats. In particular, the test case now
writes rgb24(pc, gbr/unspecified/unspecified) to the matroska file,
instead of rgb24(unspecified/unspecified/unspecified) as before.
For memcpy and memcmp, we need to multiply by the element size,
otherwise we're copying and comparing only a fraction of the buffer.
For decorrelate_sr, the buffer p1 is the one that is mutated;
copy and check p1 instead of p2.
For decorrelate_sm, both buffers are mutated, so copy and check
both of them.
For decorrelate_sm, the memcpy initialization of p1 and p1_2 was
reversed - p1 is filled with randomize, but then memcpy copies from
p1_2 to p1. As p1_2 is uninitialized at this point, clang concluded
that the copy was bogus and omitted it entirely, triggering failures
in this test on x86 (where there was an existing assembly implementation
to test).
Signed-off-by: Martin Storsjö <martin@martin.st>
The ffmpeg coding style doesn't usually use const on scalar
parameters (or on the pointer values - as opposed to the type
that is pointed to, where it has a semantic meaning), contrary
to the dav1d coding style (where this was imported from).
This avoids warnings about differences in the type signatures
between declaration and definition of this function, with older
versions of MSVC.
The issue was observed with one version of MSVC 2017,
19.16.27024.1, with warnings like these:
src/tests/checkasm/checkasm.c(969): warning C4028: formal parameter 3 different from declaration
The warning itself is bogus as the const here is harmless, and
newer versions of MSVC no longer warn about this.
Signed-off-by: Martin Storsjö <martin@martin.st>
This can be used to run tests multple times, with e.g. differing
QEMU settings, by adding something like this to the FATE configuration
file:
target_exec="qemu-aarch64-static"
fate_targets="fate-checkasm fate-cpu"
fate_environments="sve128 sve256 sve512"
sve128_env="QEMU_CPU=max,sve128=on"
sve256_env="QEMU_CPU=max,sve256=on"
sve512_env="QEMU_CPU=max,sve512=on"
It's also possible to customize the target_exec command further
by injecting a sufficiently quoted variable into it, which then can
be updated for each run, e.g. target_exec="\$(CUR_EXEC_CMD)".
For each of the environment names in fate_environments, the tests
that are run get the name suffixed on the fate tests in the
test log and fate report, e.g. "fate-checkasm-h264dsp_sve128".
Signed-off-by: Martin Storsjö <martin@martin.st>
This can be useful if doing testing of uncommon CPU extensions by
running tests with QEMU (by configuring with e.g.
"target_exec=qemu-aarch64"), by only running the checkasm tests,
to get a reasonable test coverage without excessive test runtime.
For such a config, setting fate_targets="fate-checkasm fate-cpu"
can be a good tradeoff.
Signed-off-by: Martin Storsjö <martin@martin.st>
During a resampling operation where
1) user has specified first_pts
2) SWR_FLAG_RESAMPLE is not set initially (directly or otherwise)
3) first_pts has been fulfilled (always using hard compensation)
then upon first encountering a delay where a soft compensation is
required, swr_set_compensation will lead to another init of swr which
will reset outpts to the specified firstpts thus leading to an output
frame having its pts = firstpts. When the next input frame is received,
swr will see a large delay and inject silence from firstpts to the
current frame's pts. This can lead to severe desync and in worst case,
loss of audio playback.
Parameter firstpts initialized to AV_NOPTS_VALUE in swr_alloc and then
checked in swr_init to avoid resetting outpts, thus avoiding reapplication
of firstpts.
Fixes#4131.
This test verifies the parser's handling of multiframe JXL files that
have an entropy-encoded permuted table of contents for each frame. The
testcase is actually six JXL codestreams concatenated together, and the
parser needs to be able to find the boundaries.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
