Mans Rullgard
d743065e18
ARM: fix ff_apply_window_int16_neon() prototype
...
The length argument should be unsigned. No change in code.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-24 20:43:47 +00:00
Mans Rullgard
2d3b21ffb9
ARM: NEON optimised apply_window_int16()
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-24 19:24:03 +00:00
Mans Rullgard
245c78313f
ac3enc: NEON optimised shift functions
2011-03-24 16:30:54 +00:00
Mans Rullgard
f4855a904e
ac3enc: NEON optimised ac3_max_msb_abs_int16 and ac3_exponent_min
2011-03-24 16:30:49 +00:00
Ronald S. Bultje
f711424969
mpeg12.c: fix slice threading for mpeg2 field picture mode.
...
Fixes "make THREADS=2 fate-mpeg2-field-enc".
2011-03-24 12:16:22 -04:00
Anton Khirnov
3dd851c46b
lavc: move the version macros to a new installed header.
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-03-22 21:48:33 -04:00
Justin Ruggles
e6e9823488
Add apply_window_int16() to DSPContext with x86-optimized versions and use it
...
in the ac3_fixed encoder.
2011-03-22 21:08:30 -04:00
Vitor Sessak
ee26abf2a4
Fix an infinite loop when RoQ encoded generated a frame with a size greater than the maximum valid size.
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-03-22 18:26:46 -04:00
Kieran Kunhya
a6d2227bc8
Add kbdwin.o to AC3 decoder
...
Fixes --disable-everything --enable-decoder=ac3
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-22 22:26:20 +00:00
Reimar Döffinger
4c886d613d
Detect byte-swapped AC-3 and support decoding it directly.
...
This allows the AC-3 decoder to be used directly with RealMedia
decoders that unlike the libavformat one do not byte-swap automatically.
Since the new code is only used in case we would fail directly otherwise
there should be no risk for regressions.
2011-03-22 15:36:47 -04:00
Justin Ruggles
40728b5169
cosmetics: indentation
2011-03-22 15:36:47 -04:00
Justin Ruggles
67fc8652b9
Always copy input data for AC3 decoder.
...
Depending on error_recognition is not correct, low values do
certainly not mean it is ok to crash.
Based on a patch by Reimar Döffinger <Reimar.Doeffinger@gmx.de>
2011-03-22 15:36:47 -04:00
Justin Ruggles
85ab290470
ac3enc: make sym_quant() branch-free
2011-03-22 14:36:18 -04:00
Ronald S. Bultje
c47d383502
vc1: make P-frame deblock filter bit-exact.
2011-03-21 21:28:17 -04:00
Ronald S. Bultje
f44d6445b7
vc1: slice support.
...
Also reset coded_block at each new slice, fixes problems in slice playback.
2011-03-21 10:00:43 -04:00
Ronald S. Bultje
b81a935bd9
vc1: fix up memleaks in the error codepath.
...
Introduce end: and err: labels at the end of vc1_decode_frame(), which
will clean up allocated memory consistently.
2011-03-21 09:51:16 -04:00
Ronald S. Bultje
72452cc475
vc1: warn for unimplemented pan-scan feature.
2011-03-21 09:43:21 -04:00
Mans Rullgard
027f60f32b
ffv1: allocate correct size for sample buffer
...
This fixes a typo in the size calculation for the sample buffer
introduced in cbabccc367
.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-20 22:17:20 +00:00
Mans Rullgard
e87a6f0dc9
Move ff_dct_init_mmx declaration to dct.h
...
This was missed in 0aded94
.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-20 21:12:00 +00:00
Mans Rullgard
8eec00278c
dct: remove superflous #include
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-20 17:15:41 +00:00
Mans Rullgard
0aded9484d
Move dct and rdft definitions to separate files
...
This leaves fft.h with only the core FFT and MDCT definitions
thus making it more managable.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-20 17:15:33 +00:00
Mans Rullgard
4538729afe
Move sine windows to a separate file
...
These windows do not really belong in fft/mdct files and were
easily confused with the similarly named tables used by rdft.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-20 13:25:19 +00:00
Mans Rullgard
a45fbda994
Move ff_kbd_window_init() to a separate file
...
This function is not tightly coupled to mdct, and it's in the way
of making a fixed-point mdct implementation.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-19 19:49:27 +00:00
Mans Rullgard
26f548bb59
fft: remove inline wrappers for function pointers
...
This removes the rather pointless wrappers (one not even inline)
for calling the fft_calc and related function pointers.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-19 19:49:18 +00:00
Mans Rullgard
42cfb3835b
Remove Sonic experimental audio codec
...
Since initially committed in 2004, this codec has only been touched
for maintenanance. Functionally, it contains no novel ideas and
its intended audience is better served by existing mature codecs.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-19 15:24:31 +00:00
Mans Rullgard
2912e87a6c
Replace FFmpeg with Libav in licence headers
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-19 13:33:20 +00:00
Nathan Caldwell
350785a662
aacenc: 10l, missed a reference when refactoring the psymodel.
2011-03-17 21:01:08 -07:00
Justin Ruggles
0f999cfddb
ac3enc: add float_to_fixed24() with x86-optimized versions to AC3DSPContext
...
and use in scale_coefficients() for the floating-point AC-3 encoder.
2011-03-17 16:46:48 -04:00
Nathan Caldwell
4afedfd8e5
aacenc: cosmetics, indentation, and comment clarification
...
Correct bad indentation in aaccoder
Clarify and correct comments in 3GPP psymodel, other cosmetics.
2011-03-16 23:35:39 -04:00
Nathan Caldwell
b7c96769c5
aacenc: Refactor the parts of the AAC psymodel.
...
3GPP:
Remove ffac from and move min_snr out of AacPsyBand.
Rearrange AacPsyCoeffs to make it easier to implement energy spreading.
Rename the band[] array to bands[]
Copy energies and thresholds at the end of analysis.
LAME:
Use a loop instead of an if chain in LAME windowing.
2011-03-16 23:34:12 -04:00
Young Han Lee
f578854efc
aaccoder: Change FFMAX for allzero flag to OR bit operation
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-03-16 23:12:43 -04:00
Ramiro Polla
cbf5d22d24
Remove occurrences of my old email address
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-16 23:19:40 +00:00
Mans Rullgard
381d37fda9
dsputil: add bswap16_buf()
...
There are several places where a buffer is byte-swapped in 16-bit units.
This allows them to share code which can be optimised for various
architectures.
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-16 23:19:40 +00:00
Janne Grunau
a03be6e1ba
use LIBAV_LICENSE and LIBAV_VERSION instead of FFMPEG_*
2011-03-16 21:54:39 +01:00
Janne Grunau
29ba091136
replace FFMPEG with LIBAV in FFMPEG_CONFIGURATION
...
also update the multiple inclusion guards in config.h|mak
2011-03-16 21:54:39 +01:00
Justin Ruggles
79414257e2
mathops: fix MULL() when the compiler does not inline the function.
...
If the function is not inlined, an immmediate cannot be used for the
shift parameter, so the %cl register must be used instead in that case.
This fixes compilation for x86-32 using gcc with --disable-optimizations.
2011-03-15 20:49:37 -04:00
Justin Ruggles
aaff3b312e
mathops: change "g" constraint to "rm" in x86-32 version of MUL64().
...
The 1-arg imul instruction cannot take an immediate argument, only a register
or memory argument.
2011-03-15 13:43:47 -04:00
Justin Ruggles
b181b8fb96
mathops: convert MULL/MULH/MUL64 to inline functions rather than macros.
...
This fixes unexpected name collisions that were occurring with variables
declared within the macros.
It also fixes the fate-acodec-ac3_fixed regression test on x86-32.
2011-03-15 13:43:47 -04:00
Philip Langdale
025225d7ee
h264_mp4toannexb_bsf: Fix spurious warning when stream has SPS and PPS units.
...
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-03-15 07:20:44 -04:00
Justin Ruggles
f1efbca5e9
ac3enc: add SIMD-optimized shifting functions for use with the fixed-point AC3 encoder.
2011-03-14 08:45:31 -04:00
Justin
323e6fead0
ac3enc: do not right-shift fixed-point coefficients in the final MDCT stage.
...
This increases the accuracy of coefficients, leading to improved quality.
Rescaling of the coefficients to full 25-bit accuracy is done rather than
offsetting the exponent values. This requires coefficient scaling to be done
before determining the rematrixing strategy. Also, the rematrixing strategy
calculation must use 64-bit math to prevent overflow due to the higher
precision coefficients.
2011-03-14 08:45:26 -04:00
Peter Ross
6e7cf13b6b
mm decoder: move buffer allocation from decode_init() to decode_frame()
...
This permits playback in ffplay when libavfilter is enabled.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-03-14 08:07:29 -04:00
Peter Ross
0697440c1e
Bitmap Brothers JV video decoder
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-03-14 08:05:01 -04:00
Johan Andersson
21de920472
Update the url to the site website and change ffmpeg-devel to libav-devel
...
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
2011-03-13 18:45:29 -04:00
Jason Garrett-Glaser
81a131312d
VP8: fix other function declaration
...
Was missed in 3efbe137
.
2011-03-12 15:36:15 -08:00
Hendrik Leppkes
0215006ab7
VC1: Export profile/level
...
Signed-off-by: Mans Rullgard <mans@mansr.com>
2011-03-12 14:08:27 +00:00
Jason Garrett-Glaser
1eeca88691
VP8: optimize VP8Context struct ordering
...
Shaves at least 3KB off code size on x86, should improve cache utilization.
This would probably be useful to do for other decoders/encoders as well.
2011-03-12 03:43:42 -08:00
Jason Garrett-Glaser
3efbe13739
VP8: fix function declaration
2011-03-12 03:41:39 -08:00
Jason Garrett-Glaser
b1d2f812c9
VP8: token probs doesn't need padding
...
prob[0] is the only prob array ever accessed, so prob[1] can serve as padding
for prob[0].
2011-03-12 03:41:36 -08:00
Jason Garrett-Glaser
628b48db85
VP8: use a goto to break out of two loops
...
A break statement was supposed to break out of two loops, but only broke out of one.
Didn't affect output, just could have been marginally slower.
2011-03-12 03:41:33 -08:00