As a side effect of the last commit, avcodec_open() now calls it automatically,
so there is no longer any need for clients to call it.
Instead they should set AVCodecContext.thread_count.
avcodec_thread_free() is deprecated, and will be removed from avcodec.h at the
next MAJOR libavcodec bump.
Rename the functions to ff_thread_init/free, since they are now internal.
Wrappers are provided to maintain API compatibility.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
It is useful for applications that hand input data directly to lavf via
a ByteIOContext.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 3940caad02)
Signed-off-by: Nicolas George <nicolas.george@normalesup.org>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit fe174fc8fc)
It's consistent with the -metadata option and easier to write.
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
(cherry picked from commit 87e4d9b252)
The bumps are for adding version.h and avio_{get/put}_str functions in
lavf and making av_dlog public in lavu.
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
The bumps are for adding version.h and avio_{get/put}_str functions in
lavf and making av_dlog public in lavu.
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
Around 01/28/11 18:56, Ronald S. Bultje scribbled:
> That patch is now merged, can you submit the update to muxers.texi?
> Then we'll apply the whole thing.
See attached. I hope the documentation is enough.
--
Georgi Chorbadzhiyski
http://georgi.unixsol.org/
From c236024b8254f5c2c45934c30fff390cb0e55a5e Mon Sep 17 00:00:00 2001
From: Georgi Chorbadzhiyski <gf@unixsol.org>
Date: Tue, 25 Jan 2011 13:09:17 +0200
Subject: [PATCH] mpegts: Replace defines in with AVOptions
This patch adds support for setting transport_stream_id,
original_network_id, service_id, pmt_start_pid and start_pid
in mpegts muxer.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 445996aa51)
Around 01/28/11 18:56, Ronald S. Bultje scribbled:
> That patch is now merged, can you submit the update to muxers.texi?
> Then we'll apply the whole thing.
See attached. I hope the documentation is enough.
--
Georgi Chorbadzhiyski
http://georgi.unixsol.org/
From c236024b8254f5c2c45934c30fff390cb0e55a5e Mon Sep 17 00:00:00 2001
From: Georgi Chorbadzhiyski <gf@unixsol.org>
Date: Tue, 25 Jan 2011 13:09:17 +0200
Subject: [PATCH] mpegts: Replace defines in with AVOptions
This patch adds support for setting transport_stream_id,
original_network_id, service_id, pmt_start_pid and start_pid
in mpegts muxer.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The generated HTML files are similar to the ones generated with
texi2html 1.56k used on the website.
Tested with texi2html 1.78 and 5.0. 1.78 is the minimal recommended
version.
The removed @sp from the titlepage section were ignored until
texi2html 5.0. If not removed the pages generated by 5.0 will have ugly
empty space around the title.
(cherry picked from commit a8f0814a74)
The generated HTML files are similar to the ones generated with
texi2html 1.56k used on the website.
Tested with texi2html 1.78 and 5.0. 1.78 is the minimal recommended
version.
The removed @sp from the titlepage section were ignored until
texi2html 5.0. If not removed the pages generated by 5.0 will have ugly
empty space around the title.
fixes issue2465.
The problem is that the ffmpeg (the app) -streamid option did not work
with -newaudio/-newvideo/-newsubtitle.
The cause was a conflict between the feature where streamid values were
reset to default for each output filename, and the implementation of
-new*, which requires that the -new* option be specified after the
target filename.
My patch changes the ffmpeg behavior so that user-specified streamid
values apply to all the following output files on the command line
(rather than just the next output filename.)
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
(cherry picked from commit 20ac9de3df)
fixes issue2465.
The problem is that the ffmpeg (the app) -streamid option did not work
with -newaudio/-newvideo/-newsubtitle.
The cause was a conflict between the feature where streamid values were
reset to default for each output filename, and the implementation of
-new*, which requires that the -new* option be specified after the
target filename.
My patch changes the ffmpeg behavior so that user-specified streamid
values apply to all the following output files on the command line
(rather than just the next output filename.)
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
More consistent with the rest of FFmpeg and sounds more natural to
English speaking people.
Originally committed as revision 26374 to svn://svn.ffmpeg.org/ffmpeg/trunk
If filtered, only packets from the right source address and port
are received.
To test, play back e.g. some mpeg4 video RTSP stream (where the
video stream is the first stream in the presentation) over UDP.
While receiving this stream, send another stream to the same port:
ffmpeg -re -i <whatever> -vcodec mpeg4 -an -f rtp
rtp://127.0.0.1:5000?localport=1234
Normally, the RTSP playback reports lots of errors at this point.
If the RTSP stream has the ?filter_src option enabled, these
interferring packets are ignored.
Originally committed as revision 26246 to svn://svn.ffmpeg.org/ffmpeg/trunk
If the remote address is updated later with this function, the caller
shouldn't set the connect option until in this call.
Originally committed as revision 26245 to svn://svn.ffmpeg.org/ffmpeg/trunk
timebase value already set in the driver, and set it back in the codec
stream, rather than leaving the invalid value of 0/0.
In particular, fix ffmpeg grabbing timestamps when the timebase value
is not set through the CLI.
Originally committed as revision 26224 to svn://svn.ffmpeg.org/ffmpeg/trunk
explicit reference to the ffmpeg tool command for keeping the docs
more generic.
Originally committed as revision 26098 to svn://svn.ffmpeg.org/ffmpeg/trunk
FILTERNAME=ARGS and FILTERNAME:ARGS syntax.
The same filter class will be used for managing all the libopencv
filtering functions.
Originally committed as revision 26079 to svn://svn.ffmpeg.org/ffmpeg/trunk
Galvão Póvoa <marspeoplester gmail com>, mentored by Robert Swain <robert
dot swain gmail com>.
Originally committed as revision 26051 to svn://svn.ffmpeg.org/ffmpeg/trunk
Patch by Nolan L nol888 <=> gmail >=< com.
See thread:
Subject: [FFmpeg-devel] [PATCH] Port gradfun to libavfilter (GCI)
Date: Mon, 29 Nov 2010 07:18:14 -0500
Originally committed as revision 25942 to svn://svn.ffmpeg.org/ffmpeg/trunk
libavcodec to libavcore.
Remove another compile-time dependancy of libavfilter on libavcodec.
Originally committed as revision 25923 to svn://svn.ffmpeg.org/ffmpeg/trunk
Make it accept the frei0r=filtername=params as alternative to
frei0r=filtername:params.
Originally committed as revision 25856 to svn://svn.ffmpeg.org/ffmpeg/trunk
ff_avfilter_graph_check_validity()
ff_avfilter_graph_config_links()
ff_avfilter_graph_config_formats()
and move their declaration to internal.h. These functions are never
used in application code, so it is better to consider them internal
functions, this can be changed later if necessary. Simplify API.
Originally committed as revision 25737 to svn://svn.ffmpeg.org/ffmpeg/trunk
Based on a patch by Nicolas George
<@var{name}.@var{surname}@@normalesup.@code{org}>.
Originally committed as revision 25709 to svn://svn.ffmpeg.org/ffmpeg/trunk
eval API.
More grep-friendly and more consistent with the rest of the FFmpeg
API.
Originally committed as revision 25708 to svn://svn.ffmpeg.org/ffmpeg/trunk
The new name is shorter and more consistent with the FFmpeg API, and
sounds less evil.
Originally committed as revision 25707 to svn://svn.ffmpeg.org/ffmpeg/trunk
avfilter_graph_parse() declaration to libavfilter/avfiltergraph.h.
Simplify, and less confusing for the user.
Originally committed as revision 25705 to svn://svn.ffmpeg.org/ffmpeg/trunk
The new name is shorter and more consistent with the rest of the API.
This change breaks libavfilter API/ABI.
Originally committed as revision 25674 to svn://svn.ffmpeg.org/ffmpeg/trunk
av_get_sample_fmt_name()
av_get_sample_fmt()
av_get_sample_fmt_string()
in libavcore, and deprecate the corresponding libavcodec/audioconvert.h functions:
avcodec_get_sample_fmt_name()
avcodec_get_sample_fmt()
avcodec_sample_fmt_string()
Originally committed as revision 25653 to svn://svn.ffmpeg.org/ffmpeg/trunk
