This avoids unnecessary churn and build breakage for users, by
making sure the whole version.h is included like it has been so far,
while keeping the benefit of not needing to rebuild most files in
the ffmpeg tree on minor/micro bumps.
Signed-off-by: Martin Storsjö <martin@martin.st>
Peeking into the muxing queue can improve the estimate of
the lowest timestamp needed for avoid_negative_ts in case
the lowest timestamp is in a packet other than the first packet
to be muxed.
This fixes tickets #4536 and #5784 as well as the output from
the matroska-avoid-negative-ts FATE-test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Otherwise there is no way to detect an error returned by avio_close() because
ff_format_io_close cannot get the return value.
Checking the return value of the close function is important in order to check
if all data was successfully written and the underlying close() operation was
successful.
It can also be useful even for read mode because it can return any pending
AVIOContext error, so the user don't have to manually check AVIOContext->error.
In order to still support if the user overrides io_close, the generic code only
uses io_close2 if io_close is either NULL or the default io_close callback.
Signed-off-by: Marton Balint <cus@passwd.hu>
For most check_bitstream() functions this just avoids having
to dereference s->streams[pkt->stream_index] themselves; but for
meta-muxers it will allow to forward the packet to stream with
a different stream_index (belonging to a different AVFormatContext)
without using a spare packet.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently the interleave_packet functions use a packet for
a new packet to be interleaved (may be NULL if there is none) and
a packet for output; said packet is always a stack packet in
interleaved_write_packet(). But all the interleave_packet functions
in use first move the packet to the packet list and then check whether
a packet can be returned, i.e. the effective lifetime of the new packet
ends before the packet for output is touched.
So one can use one packet both for input and output by adding a new
parameter that indicates whether there is a packet to add to the packet
list; there is just one complication: In case the muxer is flushed,
there is no packet available. This can be solved by reusing one of
the packets from AVFormatInternal. They are currently unused when
flushing in av_interleaved_write_frame().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The earlier documentation claimed that av_interleaved_write_frame()
always orders by dts, which is not necessarily true when using muxers
with custom interleavement functions or the audio_preload option.
Furthermore, the documentation stated that libavformat takes ownership
of the reference of the provided packet (if it is refcounted) and that
the caller may not access the data through this reference after the
function returns. This suggests that the returned packet is not blank,
but instead still contains some set, but invalid fields, which implies
that it would be dangerous to unreference this packet again.
But this is not true: av_interleaved_write_frame()'s actual behaviour
is to always output blank packet (even on error). This commit documents
this fact so that callers know that they can directly reuse this packet.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Do this by allocating AVStream together with the data that is
currently in AVStreamInternal; or rather: Put AVStream at the
beginning of a new structure called FFStream (which encompasses
more than just the internal fields and is a proper context in its own
right, hence the name) and remove AVStreamInternal altogether.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Do this by allocating AVFormatContext together with the data that is
currently in AVFormatInternal; or rather: Put AVFormatContext at the
beginning of a new structure called FFFormatContext (which encompasses
more than just the internal fields and is a proper context in its own
right, hence the name) and remove AVFormatInternal altogether.
The biggest simplifications occured in avformat_alloc_context(), where
one can now simply call avformat_free_context() in case of errors.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Both AVInputFormat and AVOutputFormat currently lack an equivalent to
AVCodec's caps_internal. E.g. if reading a header fails, each demuxer
is currently required to clean up manually, which often means to just
call the demuxer's read_close function. This could (and will) be done
generically via an equivalent of FF_CODEC_CAP_INIT_CLEANUP.
Because of the unholy ABI-relationship between libavdevice and
libavformat adding such a flag is only possible when the ABI is open
(despite the flag not being part of the public API), such as now.
Therefore such a flag is also added to AVOutputFormat, despite there
being no immediate use for it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It can be useful to library users, and is currently being used by ffmpeg.c
Suggested-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This will give us more room to improve the implementation later.
Suggested-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: James Almer <jamrial@gmail.com>
This also allows to exclusively use pointers to const AVCodec in
fftools/ffmpeg_opt.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Deprecated in d682ae70b4,
ineffective since ca4df37f06.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Affected function pointers (always NULL) in AVInputFormat,
AVOutputFormat as well as private fields of AVStream.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This field needs to be replaced altogether, not just its type changed.
This will be done in a separate change.
Signed-off-by: James Almer <jamrial@gmail.com>
64 bits are needed in order to retain the uid values of Matroska
chapters; the type is kept signed because the semantics of NUT chapters
depend upon whether the id is > 0 or < 0.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
av_stream_add_side_data() already defines size as a size_t, so this makes it
consistent across all side data functions.
Signed-off-by: James Almer <jamrial@gmail.com>
This flag was added in 492026209b
in conjunction with av_demuxer_open() to allow to pass private
options to demuxers. It worked as follows: av_open_input_stream()
(the predecessor of avformat_open_input()) would not call the
read_header function if this flag is set. Instead the user could set
private options of the demuxer via the format's private class after
avformat_open_input() and then call av_demuxer_open() which called
the format's read_header function.
This approach was abandoned in e37f161e66
and av_demuxer_open() deprecated; instead the AVDictionary based way of
passing private options to the demuxer was choosen. Yet
AVFMT_FLAG_PRIV_OPT has never been deprecated and av_demuxer_open()
never removed. This commit implements the deprecation of the flag and
schedules av_demuxer_open for removal on the next major bump.
Given that av_demuxer_open() has been deprecated in 2012 and that this
flag is useless without it, the flag will be ignored after the next
major version bump.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It has been added in 6db42a2b6b,
yet since then none of the necessary create/free_device_capabilities
functions has been implemented, making this API completely useless.
Because of this one can already simplify
avdevice_capabilities_free/create and can already remove the function
pointers at the next major bump; given that the documentation explicitly
states that av_device_capabilities is not to be used by a user, it's
options can already be removed (save for the sentinel).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
These fields were added to support -merge_pmt_versions, but the mpegts demuxer
is also keeping track its programs internally, so that should be a better place
to handle it.
Also it is not a very good idea to keep fields like program_num or
pmt_stream_idx in an AVStream, because a single stream can be part of multiple
programs, multiple PMTs, so the stream attributes can refer to any program the
stream is part of.
Since they are not part of public API, lets simply remove them, or rather
replace them with placeholders for ABI compatibility with libavdevice.
Signed-off-by: Marton Balint <cus@passwd.hu>
