The warnings are false positives, older gcc versions (such as 4.5)
think the variables can be used uninitialized while they in
practice can't, while newer (4.6) gets it right.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'f53490cc0c809975f8238d5a9edbd26f83bd2f84':
rtpdec/srtp: Handle CSRC fields being present
rtpdec: Check the return value from av_new_packet
ac3dec: fix non-optimal dithering of zero bit mantissas
Conflicts:
libavcodec/ac3dec.c
libavformat/rtpdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c6f1dc8e4cd967ae056698eafb891a08003c211c':
rtpdec: Move setting the parsing flags to the actual depacketizers
rtpdec: Split handling of mpeg12 audio/video to a separate depacketizer
Conflicts:
libavformat/rtpdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Untested, due to lack of rtp stream with CSRCs, but the code as
is does not work with multiple CSRCs
Reviewed-by: Luca Abeni <lucabe72@email.it>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2f3bada63e57345329c4f9b48e9b81b5cfc03d05':
lavf: Add a protocol for SRTP encryption/decryption
rtsp: Support decryption of SRTP signalled via RFC 4568 (SDES)
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ba0c72a9ae1e2954e5dcf920f7b4e9a8f8a22f3e':
build: Remove stray Makefile entry for non-existent VCR1 encoder
rtpdec: Handle more received packets than expected when sending RR
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd0fe217e3990b003b3b3f2c2daaadfb2af590def':
rtpdec: Simplify insertion into the linked list queue
rtpdec: Remove a woefully misplaced comment
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This only takes care of decrypting incoming packets; the outgoing
RTCP packets are not encrypted. This is enough for some use cases,
and signalling crypto keys for use with outgoing RTCP packets
doesn't fit as simply into the API. If the SDP demuxer is hooked
up with custom IO, the return packets can be encrypted e.g. via the
SRTP protocol.
If the SRTP keys aren't available within the SDP, the decryption
can be handled externally as well (when using custom IO).
Signed-off-by: Martin Storsjö <martin@martin.st>
Without this, we'd signal a huge loss rate (due to unsigned
wraparound) if we had received one packet more than expected (that
is, one seq number sent twice). The code has a check for lost_interval
<= 0, but that doesn't do what was intended as long as the variable is
unsigned.
Signed-off-by: Martin Storsjö <martin@martin.st>
The code below the comment does not at all relate to statistics,
and even if moved to the right place, the comment adds little
value.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'abae27ed3acd0a7c54f11760c5be2d2653c4edf8':
rtpdec: Fix the calculation of expected number of packets
fate: vp3: Fix fate-vp3-coeff-level64 test dependencies
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously, we always signalled a zero time since the last RTCP
SR, which is dubious.
The code also suggested that this would be the difference in
RTP NTP time units (32.32 fixed point), while it actually is
in in 1/65536 second units. (RFC 3550 section 6.4.1)
Signed-off-by: Martin Storsjö <martin@martin.st>
This brings back some code that was added originally in 4a6cc061
but never was used, and was removed as unused in 4cc843fa. The
code is updated to actually work and is tested to return sane
values.
Signed-off-by: Martin Storsjö <martin@martin.st>
The base_seq variable is set to first_seq - 1 (in
rtp_init_sequence), so no + 1 is needed here.
This avoids reporting 1 lost packet from the start.
Signed-off-by: Martin Storsjö <martin@martin.st>
The question can be answered: No, we do not know the initial sequence
number from the SDP. In certain cases, it can be known from the
RTP-Info response header in RTSP though. (In that case, we use it as
timestamp origin, but not for rtp receiver statistics.)
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'ed79093222ceb42f0c3a39095a69af0b32be5450':
rtpdec: Add a terminating null byte at the end of the SDES/CNAME
yuv4mpeg: do not use deprecated functions
oggdec: fix faulty cleanup prototype
idcin: return 0 from idcin_read_packet() on success.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is required by RFC 3550 (section 6.5):
The list of items in each chunk MUST be terminated by one or more
null octets, the first of which is interpreted as an item type of
zero to denote the end of the list.
This was implicitly added as padding before, unless the host name
length matched up so no padding was added.
This makes wireshark parse the packets properly if other RTCP items
are appended to the same packet.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '42805eda554a7fc44341282771531e7837ac72b7':
rtpdec: Store the dynamic payload handler in the rtpdec context
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This sends NACK for missed packets and PLI (picture loss indication)
if a depacketizer indicates that it needs a new keyframe, according
to RFC 4585.
This is only enabled if the SDP indicated that feedback is supported
(via the AVPF or SAVPF profile names).
The feedback packets are throttled to a certain maximum interval
(currently 250 ms) to make sure the feedback packets don't eat up
too much bandwidth (which might be counterproductive). The RFC
specifies a more elaborate feedback packet scheduling.
The feedback packets are currently sent independently from normal
RTCP RR packets, which is not totally spec compliant, but works
fine in the environments I've tested it in. (RFC 5506 allows this,
but requires a SDP attribute for enabling it.)
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e96406eda4f143f101bd44372f7b2d542183000a':
rtsp: Add support for depacketizing RTP data via custom IO
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3f95f0dda55fca74b646937095a02a8fa9776622':
rtpdec: Move the URLContext used for RTCP RR out from the context, to a parameter
Merged-by: Michael Niedermayer <michaelni@gmx.at>
To use this, set sdpflags=custom_io to the sdp demuxer. During
the avformat_open_input call, the SDP is read from the AVFormatContext
AVIOContext (ctx->pb) - after the avformat_open_input call,
during the av_read_frame() calls, the same ctx->pb is used for reading
packets (and sending back RTCP RR packets).
Normally, one would use this with a read-only AVIOContext for the
SDP during the avformat_open_input call, then close that one and
replace it with a read-write one for the packets after the
avformat_open_input call has returned.
This allows using the RTP depacketizers as "pure" demuxers, without
having them tied to the libavformat network IO.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '90c784cc13f6bf21a8eb69f3b88b50c7a70f6c59':
rtpdec: Pass the sequence number to depacketizers
configure: Make avconv depend on null, anull and resample filters
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtpdec: Remove an outdated todo comment
rtpdec: Rename a static variable to normal naming conventions
sh4: dsputil: remove duplicate of ff_gmc_c()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This comment was added in e309128f, in 2002, and has been brought
along since then more or less unmodified.
The first point of the todo was implemented in dbf30963 in 2006,
the second one is not relevant to rtpdec.c (brought along from
rtp.c in 8eb793c4 in 2008) but would be more relevant to the
rtp muxer, although it isn't a good idea anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
dv1394: Swap the min and max values of the 'standard' option
rtpdec_vp8: Don't parse fields that aren't used
lavc: add some AVPacket doxy.
audiointerleave: deobfuscate a function call.
rtpdec: factorize identical code used in several handlers
a64: remove interleaved mode.
doc: Point to the new location of the c99-to-c89 tool
decode_audio3: initialize AVFrame
ws-snd1: set channel layout
wmavoice: set channel layout
wmapro: use AVCodecContext.channels instead of keeping a private copy
wma: do not keep private copies of some AVCodecContext fields
Conflicts:
libavcodec/wmadec.c
libavcodec/wmaenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
