When the interpolated value is divided by the sum of weights, no
rounding is done, which means the value is truncated. This results in
a slight bias towards dark green in the interpolated area. Rounding
properly removes the bias.
I measured this change to reduce the interpolation error by 1 to 2 %
on average on a number of sample input and logo area combinations.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '823fa7004571cb8404ca5785f9fa6e85f0f9f3d3':
fate: Rework sgi tests into a suite and add the missing ones
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This is never mentioned in the specifications, and decoders work
just as fine without it. Update the fate references since the compressed
file is smaller.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
* commit '1d62ee38894afb696674db78cee8f8d89204a8fe':
movenc: Add a unit test for signaling of the track start times
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This way, it never starts with 0xFFF0, and never trips the
ADTS "Detection" code in movenc.c.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '3eeb7edfc2a1157b7b0e0ce21ac2cd44d55d405b':
movenc: Add a unit test for frag_discont with edit lists
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
All diferences in unit tests have been acounted for.
* commit '59e8ec0aa8ab174701d01a3bfe96fedd0b7fcead':
movenc: Add an API unit test for fragmenting options/calls
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
a set ost->frame_rate does not imply CFR in ffmpeg
The changed fate tests had all wrong packet durations
(like 1/1000 or 1/90000)
There might be more cases in which is_cfr could be set
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Also support disabling them as they seem to cause problems to some
Users. They are also not allowed in IRT D-10 thus the default for
mxf_d10 is not to write them
This also decreases the filesize when no user comment are stored
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Contrary to the normal fate tests that run via avconv, this tests
nontrivial call sequences that are only doable via the API
(mainly for different corner cases when using the muxer for
segmenting).
The test muxes fake packet data (with extradata that looks
enough like proper data to make the file be viewable with e.g.
boxdumper) and checks the hash of the produced files. The test also
verifies that fragments produced via different call sequences remain
identical (to avoid e.g. updating the output hashes and suddenly
having fragments that used to be identical suddenly diverging), for
fragments written with frag_discont and/or delay_moov.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '3efd71b4d0b4a73ccbbbdc092e6bbd54d92633f4':
avconv: set packet duration for CFR video streams
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
The CMP variable seems to have been inherited from fate-api-seek which set it to null
the mxf reference needed a change due to c7e14a279f
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Trim unneeded leading components and trailing zeros.
Move the formating code in a separate function.
Use the function also to format the default value, it was currently
printed as plain integer, inconsistent to the way it is parsed.
Similar to testsrc, but using drawutils and therefore
supporting a lot of pixel formats instead of just rgb24.
This allows using it as input for other tests without
requiring a format conversion.
It is also slightly faster than testsrc for some reason.
Signed-off-by: Steven Robertson <steven@strobe.cc>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For the 10-show-existing-frame, the source file indeed has a timestamp
of 3 (or 100/33) for the second visible frame, so the fix appears to
work correctly. For the other, only the timebase is fixed, but again
appears to be correct now.
It was useful to (accidentally?) spot an overflow in the column pass
of the x86 simple_idct10 implementation.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
omse goes from 0.03060703 (which fails for dct-test) to 0.01663750.
This also actually improve the error of decoding the sample generated
by fate-vsynth3-dnxhd1080i-10bit using simple_idct10 to FAANI, which
goes (when resampled to yuv422p) from:
stddev: 0.06 PSNR: 72.28 MAXDIFF: 1
to identical.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Includes escapes that should now be supported and a few features not yet
fully supported, like comments, regions, classes, ruby, and lang.
All were tested with https://quuz.org/webvtt/ for validation, except
regions because the validator doesn't support them yet, and I couldn't
find any other way to validate WebVTT.
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
Currently only 2 profiles are evaluated because they are the only 2
with distributed test sequences.
- CID 1260: YUV 4:2:2 10 bits with block-adaptive interlace coding,
from ticket 4876;
- CID 1270: YUV 4:4:4 10 bits (HR), 1920x839, from ticket 4581.
They were generated from the ticket sequences by running the
following kind of command-line;
ffmpeg -i $INPUT -an -sn -vcodec copy -vframes 1 -y $OUTPUT.mov
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The current one, while correct, does not yield the best possible
results. The specificiations suggest another formula, which results
in quality gains in the decoded output from fate tests. This
justifies changing said formula.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Convert them to zigzag order, as the rest of them are.
When I was adding support for 10-bit DNxHD, I just copy-pasted the
missing quant matrices from the spec. Now it turns out the existing
matrices in dnxhddata.c were in zigzag order. This resulted in wrong
quantization for 10-bit DNxHD. The attached patch fixes the problem by
converting 10-bit quant matrices to zigzag order.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The sample position is made weird and non-nominal to force catching
such issues as default values or specialized operations hiding
issues in corner cases.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This introduces a slight timebase computation difference in zmbv-8bit
fate test. This is expected since the new options are double instead
of ints, and the additional precision skews the results in a non
meaningful way.
FATE refs changed to accomodate for the new default behavior of the function.
Numbers are now interpreted as a channel layout, instead of a number of channels.
* commit '58c3720a3cc71142b5d48d8ccdc9213f9a66cd33':
fate: Make sure a corner-case for ASF is covered
Adjusted fate ref to match the different timebase of the ffasf demuxer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
As suggested, posting the combined patch with the fate changes.
The patch sets the default style in ASS from the default style
information present in the movtext header.
Signed-off-by: Niklesh <niklesh.lalwani@iitb.ac.in>
Compute individual stream durations in matroska muxer.
Write them as string tags in the same format as mkvmerge tool does.
Signed-off-by: Sasi Inguva <isasi@google.com>
Also replace custom tests for MD5 with those published in RFC 2202
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes Ticket4664
The changed fate tests lack red/blue shades and thus look correct
either way
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '02b7c630875c0bc63cee5ec597aa33baf9bf4e20':
h261: Signal freeze picture release for intra frames
Conflicts:
tests/ref/vsynth/vsynth1-h261
tests/ref/vsynth/vsynth2-h261
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Freeze picture release should be set to 1 when we're responding to a
fast update request. For simplicity we set it for all intra frames,
including those that starts a GOP.
Fixes issue where Tandberg MXP1700 does not recover from packet loss
state since it's waiting for the freeze picture relase indication.
Bug-Id: 873
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Ref H.261 recommendation section 4.2.1.3, setting the still image flag
to 1 disables still image mode. Some decoders require this in order to
decode the bitstream as normal video.
Fixes H.261 calls to Cisco E20.
Also, reserved (aka spare) bits should be set to 1 unless specified
otherwise.
Bug-Id: 872
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'f91fe24e9bd6912c29bbb03d8afe878e045f9721':
g2meet: force simple idct for identical results over all fate configs
Conflicts:
tests/ref/fate/g2m3
tests/ref/fate/g2m4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
