Signed-off-by: Steven Liu <liuqi@gosun.com>
Reviewed-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
support split hls segment at duration set by hls_time
Signed-off-by: LiuQi <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Adds per slave option 'onfail' to the tee muxer allowing an output to
fail, so other slave outputs can continue.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Jan Sebechlebsky <sebechlebskyjan@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: James Almer <jamrial@gmail.com>
For example you can split a file, keeping a continuous timecode between
each segment:
ffmpeg -i src.mov -timecode 10:00:00:00 -vcodec copy -f segment \
-segment_time 2 -reset_timestamps 1 -increment_tc 1 target_%03d.mov
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
Use with -use_localtime, and set -hls_segment_filename to a path which
contains a subdirectory i.e. /some/path/%Y%m%d/%Y%m%dT%H%M%S-%s.ts
This will mkdir the %Y%m%d-part of the path if it does not already
exist.
In addition, each filename in the playlist output will be prefixed with
this subdirectory (if playlist and segment shares the same base path).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This can provide a manual workaround for ticket #4230.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
This option can force the segmenter to only start a new segment if a packet
reaches the muxer within the specified duration after the segmenting clock
time, which makes it more resilient to backward local time jumps, such as leap
seconds or transition to standard time from daylight savings time.
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Also support disabling them as they seem to cause problems to some
Users. They are also not allowed in IRT D-10 thus the default for
mxf_d10 is not to write them
This also decreases the filesize when no user comment are stored
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It makes possible to put multiple stream specifier into the select
option separated by comma.
eg. select=\'a:0,v\'
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Nicolas George <george@nsup.org>
Added HLS encryption with -hls_key_info_file <key_info_file> option. The
first line of key_info_file specifies the key URI written to the
playlist. The key URL is used to access the encryption key during
playback. The second line specifies the path to the key file used to
obtain the key during the encryption process. The key file is read as a
single packed array of 16 octets in binary format. The optional third
line specifies the initialization vector (IV) as a hexadecimal string to
be used instead of the segment sequence number (default) for encryption.
Changes to key_info_file will result in segment encryption with the new
key/IV and an entry in the playlist for the new key URI/IV.
Key info file format:
<key URI>
<key file path>
<IV> (optional)
Example key URIs:
http://server/file.key
/path/to/file.key
file.key
Example key file paths:
file.key
/path/to/file.key
Example IV:
0123456789ABCDEF0123456789ABCDEF
Example:
ffmpeg -f lavfi -i testsrc -c:v h264 -hls_key_info_file file.keyinfo
foo.m3u8
file.keyinfo:
http://server/file.key
/path/to/file.key
0123456789ABCDEF0123456789ABCDEF
Example shell script:
BASE_URL=${1:-'.'}
openssl rand 16 > file.key
echo $BASE_URL/file.key > file.keyinfo
echo file.key >> file.keyinfo
echo $(openssl rand -hex 16) >> file.keyinfo
ffmpeg -f lavfi -re -i testsrc -c:v h264 -hls_flags delete_segments \
-hls_key_info_file file.keyinfo out.m3u8
--
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Dan Dennedy <dan@dennedy.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some players do not support setting minimumUpdatePeriod to zero.
This patch adds a new parameter that will let the users set any
value to this field. Also updates the test and the documentation.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds support for WebM Live Muxing by adding a new WebM
Chunk muxer. It writes out live WebM Chunks which can be used for
playback using Live DASH Clients.
Please see muxers.texi for sample usage.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds support for creating DASH manifests for WebM Live
Streams. It also updates the documentation and adds a fate test to
verify the behavior of the new muxer flag.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This adds an option to set the service type in mpegts as defined in ETSI 300 468.
I added what I believe are the most useful service types as pre defined values,
the others can be sent by using their hexdecimal form directly (e.g. -mpegts_service_type digital_radio, -mpegts_service_type 0x07).
I've been using this patch in order to pipe internet radio stream (originally as HLS/m3u8) from ffmpeg to tvheadend,
when the service type set right tvheadend recognize the mpegts stream as a radio channel.
The patch in its original form was written by linuxstb from freenode's hts channel which allowed me pushing it upstream.
This close issue 4118.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f726fc21ef76a8ba3445448066f7b2a687fbca16':
ogg: Provide an option to offset the serial number
Conflicts:
libavformat/oggenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This option flag deletes segment files removed from the playlist after a
period of time equal to the duration of the segment plus the duration of
the playlist.
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This option allows segment filenames to be specified. Unless -hls_flags
single_file is set the filename is used as a string format with the
segment number.
Example:
ffmpeg -f lavfi -i testsrc -c:v h264 -map 0 -hls_segment_filename
bar%03d.ts foo.m3u8
Signed-off-by: Christian Suloway <csuloway@globaleagleent.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cf589faa5b7aed3bb38e08dcd00bd951e69686d1':
movenc: Add a flag for using default-base-is-moof in tfhd atoms
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a9911a1b2df37ca808e06dc30627215f4ec9a9e4':
doc: Document the omit_tfhd_offset flag to the mp4 muxer
Conflicts:
doc/muxers.texi
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Similarly to the omit_tfhd_offset flag added in e7bf085b, this
avoids writing absolute byte positions to the file, making them
more easily streamable.
This is a new feature from 14496-12:2012, so application support
isn't necessarily too widespread yet (support for it in libav was
added in 20f95f21f in July 2014).
Signed-off-by: Martin Storsjö <martin@martin.st>
