This buffer was supposed to be initialized by sscanf(input, "%7[A-Z]%n",
buf, &len), yet if the first input character is not in the A-Z range,
buf is not touched (in particular it needn't be zero-terminated if the
failure happened when parsing the first channel and it still contains
the last channel name if the failure happened when one channel name
could be successfully parsed). This is treated as error in which case
buf is used directly in the log message. This commit fixes this by
actually using the string that could not be matched in the log message
instead.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Use pthread to multithread dnn_execute_layer_conv2d.
Can be tested with command "./ffmpeg_g -i input.png -vf \
format=yuvj420p,dnn_processing=dnn_backend=native:model= \
espcn.model:input=x:output=y:options=conv2d_threads=23 \
-y sr_native.jpg -benchmark"
before patch: utime=11.238s stime=0.005s rtime=11.248s
after patch: utime=20.817s stime=0.047s rtime=1.051s
on my 3900X 12c24t @4.2GHz
About the increase of utime, it's because that CPU HyperThreading
technology makes logical cores twice of physical cores while cpu's
counting performance improves less than double. And utime sums
all cpu's logical cores' runtime. As a result, using threads num
near cpu's logical core's number will double utime, while reduce
rtime less than half for HyperThreading CPUs.
Signed-off-by: Xu Jun <xujunzz@sjtu.edu.cn>
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
This reverts commit abc884bcc0.
This patch was pushed without actual review.
An actual review would have revealed that the switch to activate
was not done correctly because the logic between request_frame()
and frame_wanted is not as direct with filters with multiple
outputs than with a single output.
Allow to set the EOF timestamp.
Also: doc/filters/testsrc*: specify the rounding of the duration option.
The changes in the ref files are right.
For filter-fps-down, the graph is testsrc2=r=7:d=3.5,fps=3.
3.5=24.5/7, so the EOF of testsrc2 will have PTS 25/7.
25/7=(10+5/7)/3, so the EOF PTS for fps should be 11/7,
and the output should contain a frame at PTS 10.
For filter-fps-up, the graph is testsrc2=r=3:d=2,fps=7,
for filter-fps-up-round-down and filter-fps-up-round-up
it is the same with explicit rounding options.
But there is no rounding: testsrc2 produces exactly 6 frames
and 2 seconds, fps converts it into exactly 14 frames.
The tests should probably be adjusted to restore them to
a useful coverage.
ff_set_common_formats() is currently only called after
graph_check_validity(), guaranteeing that inputs and outputs
are connected.
If we want to support configuring partially-connected graphs,
we will have a lot of redesign to do anyway.
Fix CID 1466262 / 1466263.
The channel_layouts and channel_counts options set what buffersink
is supposed to accept. If channel_counts contains 2, then stereo is
already accepted, there is no point in having it in channel_layouts
too. This was not properly documented until now, so only print a
warning.
Part of the code expects valid lists, in particular no duplicates.
These tests allow to catch bugs in filters (unlikely but possible)
and to give a clear message when the error comes from the user
((a)formats) or the application (buffersink).
If we decide to switch to a more efficient merging algorithm,
possibly sorting the lists, these functions will be the preferred
place for pre-processing, and can be renamed accordingly.
It will allow to refernce it as a whole without clunky macros.
Most of the changes have been automatically made with sed:
sed -i '
s/-> *in_formats/->incfg.formats/g;
s/-> *out_formats/->outcfg.formats/g;
s/-> *in_channel_layouts/->incfg.channel_layouts/g;
s/-> *out_channel_layouts/->outcfg.channel_layouts/g;
s/-> *in_samplerates/->incfg.samplerates/g;
s/-> *out_samplerates/->outcfg.samplerates/g;
' src/libavfilter/*(.)
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
In case the multichannel HRIR mode was enabled, an error could happen
between allocating a channel layouts list and attaching it to its target
destination. If an error happened, the list would leak. This is fixed by
attaching the list to its target directly after its allocation.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The headphone filter uses a variable number of inpads and allocates them
in its init function; if all goes well, the number of inpads coincides
with a number stored in the filter's private context. Yet if allocating a
subsequent inpad fails, the uninit function nevertheless uses the number
stored in the private context to determine the number of inpads to free
and not the AVFilterContext's nb_inputs. This will lead to an access
beyond the end of the allocated AVFilterContext.input_pads array and
an invalid free.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The signature filter uses qsort, but its compare function doesn't have
the signature required of such a function; therefore it casts the
function pointer to void. Yet this is wrong:
C90 only guarantees that one can convert a pointer to any incomplete
type or object type to void* and back with the result comparing equal
to the original which makes pointers to void generic pointers to
incomplete or object type. Yet C90 lacks a generic function pointer
type.
C99 additionally guarantees that a pointer to a function of one type may
be converted to a pointer to a function of another type with the result
and the original comparing equal when converting back.
This makes any function pointer type a generic function pointer type.
Yet even this does not make pointers to void generic function pointers.
Both GCC and Clang emit warnings for this when in pedantic mode.
This commit fixes this by modifying the compare function to comply with
the expected signature.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If an error happens between allocating a string intended to be used as
an inpad's name and attaching it to its input pad, the string leaks.
Fix this by inserting the inpad directly after allocating its string.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If the names are always the same, they need not be duplicated; doing so
saves allocations, checks for the allocations as well as frees.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The aiir filter adds output pads in its init function. Each of these
output pads had a name which was allocated and to be freed in the uninit
function. Given that the aiir filter has between one and two outputs,
one output pad's name was freed unconditionally and a second was freed
conditionally.
Yet if adding output pads fails, there are no output pads at all and
trying to free a nonexistent pad's name will lead to a segfault.
Furthermore, if the name could be successfully allocated, yet adding the
new pad fails, the name would leak.
This commit fixes this by not allocating the pads' names at all any
more: They are constant anyway. This allows to remove the code to free
them and hence fixes the aforementioned bugs.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
These names are always the same, so not using duplicates saves
allocations, checks for the allocations as well as frees.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
These names are always the same, so not using duplicates saves
allocations, checks for the allocations as well as frees.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
These names are mostly the same, so not using duplicates saves
allocations, checks for the allocations as well as frees.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
These names are always the same, so not using duplicates saves
allocations, checks for the allocations as well as frees.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
These names are always the same, so not using duplicates saves
allocations, checks for the allocations as well as frees.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
These names leak because freeing them in the uninit function has been
forgotten. Instead of adding the freeing code, this commit stops
allocating these names. They are constants anyway.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
These names are always the same, so not using duplicates saves
allocations, checks for the allocations as well as frees.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It has been forgotten to free the name of the second outpad if attaching
the first one to the AVFilterContext fails. Fixing this is easy: Only
prepare the second outpad after (and if) the first outpad has been
successfully attached to the AVFilterContext.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
