The partial frames leak a few uninitialized pixels through
due to incomplete interlaced error concealment support.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3e2f200237af977b9253b0aff121eee27bcedb44':
roqvideodec: fix a potential infinite loop in roqvideo_decode_frame().
xxan: fix invalid memory access in xan_decode_frame_type0()
tty: set avg_frame_rate.
FATE: enable multiple slices in the ffv1 vsynth test
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2eba9087f3031c6050f8dcd996225490be6c2410':
lavc: make up a fake frame channel layout when there is no real one.
Conflicts:
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
When parsing the Xing/Info tag, don't set the bit rate if it's an Info tag.
When parsing the stream, don't override the bit rate if it's already set,
otherwise calculate the mean bit rate from parsed frames. This way, the bit
rate will be set correctly both for CBR and VBR streams.
Signed-off-by: Alexander Kojevnikov <alexander@kojevnikov.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '813b82b927b19532e3bc3397b972c8a27b9f6326':
configure: Fix silly typo in logging command of check_struct()
fate: remove last incomplete frame from mpeg2-field-enc test
Conflicts:
tests/fate/video.mak
tests/ref/fate/mpeg2-field-enc
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
lavf: Add a fate test for the noproxy pattern matching
lavf: Handle the environment variable no_proxy more properly
Conflicts:
libavformat/Makefile
libavformat/internal.h
libavformat/tls.c
libavformat/utils.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The new code is also faster and more robust.
As for the performance:
old decoder + conversion to rgb: fps = 2618
old decoder, without converting to rgb: fps = 4012
new decoder, producing rgb: fps = 4502
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Other software does not store it in this case, and the information
is provided by the codec stream
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The QuickTime specification does not contain any hint that the atom
must not be written in some cases and both the QuickTime and the
AVID decoders do not fail if the atom is present.
This change allows to signal (visually) interlaced streams with
a codec different from uncompressed video.
As a side-effect, this fixes ticket #2202
Matroska specification lists support for BlockAdditional element
which is not supported by ffmpeg's matroska parser. This patch
adds grammar definitions for parsing that element (and few other
related elements) and then puts the data in AVPacket.side_data
with new AVPacketSideDataType AV_PKT_DATA_MATROSKA_BLOCKADDITIONAL.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts parts of d6d5ef5534, that didn't work right. (The
tests that were added failed on big endian, and the output looked
garbled on little endian as well.)
This is due to the fact that the intermediate scaling values (from
e.g. hScale8To19_c or hScale16To19_c) are stored as int32_t and
thus requires a separate output function, while yuv2gbrp_full_X_c
only interprets it as int16_t.
Signed-off-by: Martin Storsjö <martin@martin.st>
This replaces a large number of checks for the second field by
fixing the pointers when they are setup
This should also fix I/BI field pictures
Changes checksums for vc1_sa10143, the file becomes slightly closer
to what the reference decoder outputs
Based on "vc1dec: the second field is written wrong to the picture"
by Sebastian Sandberg <sebastiand.sandberg@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'dff6197dfb9b2d145729885c63f865c5fdd184aa':
nuv: do not rely on get_buffer() initializing the frame.
yop: initialize palette to 0
Conflicts:
libavcodec/nuv.c
tests/ref/fate/nuv-rtjpeg-fh
tests/ref/fate/yop
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '2cd4068071b9a8908823a3107f97e938211045ce':
fraps: fix off-by one bug for version 1.
Conflicts:
libavcodec/fraps.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '238614de679a71970c20d7c3fee08a322967ec40':
cdgraphics: do not rely on get_buffer() initializing the frame.
svq1: replace struct svq1_frame_size with an array.
vf_yadif: silence a warning.
Conflicts:
libavcodec/svq1dec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The FATE sample contains some pixels with value 0, but the palette
stored in the file contains only values from 16 up. Because the default
and cmdutils get_buffer() initialize the data to 0x80, they appear as
gray dots.
After this commit they change to black dots, which is probably still
incorrect but less visible and doesn't rely on get_buffer() initializing
the data.
We have to make some symetric changes elsewhere as this increases
the precission with which samples are stored.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '69c25c9284645cf5189af2ede42d6f53828f3b45':
dnxhdenc: fix invalid reads in dnxhd_mb_var_thread().
x86: h264qpel: Move stray comment to the right spot and clarify it
atrac3: use correct loop variable in add_tonal_components()
Conflicts:
tests/ref/vsynth/vsynth1-dnxhd-1080i
tests/ref/vsynth/vsynth2-dnxhd-1080i
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'e6bc38fd49c94726b45d5d5cc2b756ad8ec49ee0':
wmv2: move IDCT to its own DSP context.
Conflicts:
libavcodec/dsputil.h
tests/ref/seek/vsynth2-wmv2
tests/ref/vsynth/vsynth1-wmv2
tests/ref/vsynth/vsynth2-wmv2
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '8a4f26206d7914eaf2903954ce97cb7686933382':
dsputil: remove butterflies_float_interleave.
srtp: Move a variable to a local scope
srtp: Add tests for the crypto suite with 32/80 bit HMAC
Conflicts:
libavcodec/x86/dsputil.asm
libavcodec/x86/dsputil_mmx.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows us to remove FF_IDCT_WMV2, which serves no practical purpose
other than to be able to select the WMV2 IDCT for MPEG (or vice versa)
and get corrupt output.
Fate tests for all wmv2-related tests change, because (for some obscure
reason) they forced use of the MPEG IDCT. You would get the same changes
previously by not using -idct simple in the fate test (or replacing it
with -idct auto).
* commit '0eecafc948b74c247ebbc59f18f508db5d590d0b':
configure: Make the new srtp protocol depend on the rtp protocol
lavf: Add a fate test for the SRTP functions
lavu: Add a fate test for the HMAC API
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'abae27ed3acd0a7c54f11760c5be2d2653c4edf8':
rtpdec: Fix the calculation of expected number of packets
fate: vp3: Fix fate-vp3-coeff-level64 test dependencies
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'ec86ba57312745fd7ad9771e3121e79c6aacba30':
vp3: Fix double free in vp3_decode_end()
fate: Split fate-siff test into demuxer and VB video decoder test
Conflicts:
tests/fate/demux.mak
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add some additional checks for EOF and print error messages on an incomplete
header or packet.
FATE reference updated for id-cin-video due to the demuxer no longer
returning a partial video packet at EOF.
This is a port of virtual dub's histogram equalization filter by Donald
A. Graft. Based on the work by Jérémy Tran <tran.jeremy.av@gmail.com>,
done for SOCIS 2012.
This is a port of the kerndeint filter (libmpcodecs/vf_kerndeint) by
Donal A. Graft (original avisynth plugin author), and is based on the
work by Jérémy Tran <tran.jeremy.av@gmail.com> done for SOCIS 2012.
After making some blind tests on a small collection of music
samples for home usage. It turned out that the default cutoff
was too low.
The impact of filter_size was not clearly distinguishable (the
results were on the edge) with the music samples but turned out
to be clearly audible in some synthetic samples.
Thanks to Daniel for helping out with the listening tests.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
The data does not contain timing or trailing line breaks anymore. In
addition to being less idiotic, it is consistent with other codecs and
thus allows more switches between formats and codecs. It also fixes the
issue of the trailing line returns being simple \n instead of CRLF in
the ASS rectangle dialogue (this is the reason of the FATE update).
* commit '5e6ee38bd3cef0dd05f1dd7977c71f3479eb6d01':
FATE: add cavs test
cavsdec: export picture type in the output frame
Conflicts:
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Current MicroDVD AVPackets contain timing information and trailing line
breaks. The data is now only composed of the markup data. Doing this
consistently between text subtitles decoders allows to use different
codec for various formats. For instance, MicroDVD markup is sometimes
found in some VPlayer files. Also, generally speaking, the subtitles
text decoders have no use of these timings (and they must not use them
since it would break any user timing adjustment).
Technically, this is a major ABI break. In practice, a mismatching
lavf/lavc will now error out for MicroDVD decoding. Supporting both
formats requires unnecessary complex and fragile code.
FATE needs update because line breaks in the ASS file were "\n" (because
that's what is used in the original file). ASS format expect "\r\n" line
breaks; this commit fixes this issue. Also note that this "\r\n"
trailing need to be moved at some point from the decoders to the ASS
muxer.
Note that the linebreaks text codec option (but not the feature) has
been removed; its main goal was to allow demuxers to configure the text
decoder (and not meant to be used by users), but the AVOption are not a
viable solution. This is solved differently in this commit.
The SRT muxer is reponsible for separating events with two line breaks,
there is no need to add more than necessary. Similarly, other muxers
(such as Matroska) are not supposed to add line breaks at the end of the
payload.
Since 83cab07 audio stream time bases are based on SampleRate, not EditRate.
This fixes trac ticket #2029 and a few seeking issues.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Do not overwrite linesize set by get_buffer().
The last frame in the FATE test is not decoded anymore, since the file
is cut and a part of it is missing.
The initial testing of the VFW binary codec was flawed,
likely due to an AviSynth bug.
Re-testing using VirtualDub and various professional editing
applications has revealed it should have been flipped.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '9d5c62ba5b586c80af508b5914934b1c439f6652':
lavu/opt: do not filter out the initial sign character except for flags
eval: treat dB as decibels instead of decibytes
float_dsp: add vector_dmul_scalar() to multiply a vector of doubles
Conflicts:
libavutil/eval.c
tests/ref/fate/eval
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It is broken, and results will be messed up when seeking.
This also fix duration displayed for streams when using -c copy.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
* commit 'e816034a5fa131b13c4ad87bb0b5065b4f5697c6':
fate-seek: remove use of gnu make 3.82 only private modifier
fate: move vsynth reference files to their own directory
fate: move fate-acodec reference files to their own dir
configure: avplay now depends on avresample
fate: split dependencies for fate-seek tests
Conflicts:
configure
tests/fate/seek.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Each fate-seek test depends now only on the corresponding fate-acodec,
fate-vsynth2 or fate-lavf test which creates the file seek-tests
operates on. The tests and references are renamed to match the test they
depend on.
Without this exception files with ".gif" extension by default
recognized as input suitable for image2 demuxer rather than gif.
In order to pass image through gif demuxer it was necessary
to use -f gif option.
This change affected 'make fate' test results because previously
image2 demuxer and gif decoder took only first frame of multiframe
test data, which is no longer true with gif demuxer.
Signed-off-by: Vitaliy E Sugrobov <vsugrob@hotmail.com>
The new code reads the input frame when its ready, the previous
code did read the input frame during start_frame at which point it
may not yet be available.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The following commit will make it useless.
The crop_scale_vflip FATE test changes because of off-by-one differences
in output when vflipped slices are passed to sws.
This fixes correctly storing and identifying PCM in nut.
Based on patch by Luca Barbato
Found-by: durandal_1707
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
FATE: add a bink version 'b' test
FATE: add a bink version 'i' test
libswscale: remove unnecessary direct #if LIBSWSCALE_VERSION_MAJOR
Conflicts:
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently FFM files generated with one versions of ffmpeg generally
cannot be read by another.
By spliting data into chunks, more fields can saftely be appended to
chunks as well as new chunks added.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise during scaling it will try to interpret input in the wrong way and
that leads to the test results disagreeing on different platforms and with
different optimizations.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
* qatar/master:
pixfmt: support more yuva formats
swscale: support gray to 9bit and 10bit formats
configure: rewrite print_config() function using awk
FATE: fix (AD)PCM test dependencies broken in e519990
Use ptrdiff_t instead of int for intra pred "stride" function parameter.
x86: use PRED4x4/8x8/8x8L/16x16 macros to declare intrapred prototypes.
Conflicts:
libavcodec/h264pred.c
libavcodec/h264pred_template.c
libavutil/pixfmt.h
libswscale/swscale_unscaled.c
tests/ref/lavfi/pixdesc
tests/ref/lavfi/pixfmts_copy
tests/ref/lavfi/pixfmts_null
tests/ref/lavfi/pixfmts_scale
tests/ref/lavfi/pixfmts_vflip
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously if frame decoding failed it would be
silently reported as valid frame.
The fate ref is updated because sample have
truncated last video packet.
While here return meaningful error codes.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
This fixes playback in some circumstances (like webm in firefox).
Regression after 2c34367b.
It is also matching the Matroska specifications:
http://matroska.org/technical/specs/notes.html, "The quick eye will
notice that if a Cluster's Timecode is set to zero, it is possible to
have Blocks with a negative Raw Timecode. Blocks with a negative Raw
Timecode are not valid."
* commit '0a7005bebd23ade7bb852bce0401af1a8fdbb723':
rtpdec_xiph: fix function return type
smjpeg: fix type of 'ret' variable in smjpeg_read_packet()
mpegvideo: remove write-only variable
Use proper return values in case of missing features
fate: add avstring test
rangecoder-test: Set error message log level to error, instead of debug
Conflicts:
libavcodec/aacdec.c
libavcodec/amrnbdec.c
libavcodec/mpegvideo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'b522000e9b2ca36fe5b2751096b9a5f5ed8f87e6':
avio: introduce avio_closep
mpegtsenc: set muxing type notification to verbose
vc1dec: Use correct spelling of "opposite"
a64multienc: change mc_frame_counter to unsigned
arm: call arm-specific rv34dsp init functions under if (ARCH_ARM)
svq1: Drop a bunch of useless parentheses
parseutils-test: do not print numerical error codes
svq1: K&R formatting cosmetics
Conflicts:
doc/APIchanges
libavcodec/svq1dec.c
libavcodec/svq1enc.c
libavformat/version.h
libavutil/parseutils.c
tests/ref/fate/parseutils
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This test only make sure that the idet filter does not crash.
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'cbcd497f384f0f8ef3f76f85b29b644b900d6b9f':
adxdec: use planar sample format
adpcmdec: use planar sample format for adpcm_thp
adpcmdec: use planar sample format for adpcm_ea_xas
adpcmdec: use planar sample format for adpcm_ea_r1/r2/r3
adpcmdec: use planar sample format for adpcm_xa
adpcmdec: use planar sample format for adpcm_ima_ws for vqa version 3
adpcmdec: use planar sample format for adpcm_4xm
adpcmdec: use planar sample format for adpcm_ima_wav
adpcmdec: use planar sample format for adpcm_ima_qt
pcmdec: use planar sample format for pcm_lxf
mace: use planar sample format
atrac1: use planar sample format
build: non-x86: Only compile mpegvideo optimizations when necessary
rtpdec_mpeg4: au_headers is a single array, simple av_free is enough
avcodec: free extended_data instead address of it
fate: Add tests of the ff_make_absolute_url function
url: Handle relative urls starting with two slashes
url: Handle relative urls being just a new query string
url: Don't treat slashes in query parameters as directory separators
Conflicts:
libavcodec/adxdec.c
libavcodec/mips/Makefile
libavcodec/pcm.c
libavcodec/utils.c
libavformat/Makefile
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
wmaenc: use float planar sample format
(e)ac3enc: use planar sample format
aacenc: use planar sample format
adpcmenc: use planar sample format for adpcm_ima_wav and adpcm_ima_qt
adpcmenc: move 'ch' variable to higher scope
adpcmenc: fix 3 instances of variable shadowing
adpcm_ima_wav: simplify encoding
libvorbis: use planar sample format
libmp3lame: use planar sample formats
vorbisenc: use float planar sample format
ffm: do not write or read the audio sample format
parseutils: fix parsing of invalid alpha values
doc/RELEASE_NOTES: update for the 9 release.
smoothstreamingenc: Add a more verbose error message
smoothstreamingenc: Ignore the return value from mkdir
smoothstreamingenc: Try writing a manifest when opening the muxer
smoothstreamingenc: Move the output_chunk_list and write_manifest functions up
smoothstreamingenc: Properly return errors from ism_flush to the caller
smoothstreamingenc: Check the output UrlContext before accessing it
Conflicts:
doc/RELEASE_NOTES
libavcodec/aacenc.c
libavcodec/ac3enc_template.c
libavcodec/wmaenc.c
tests/ref/lavf/ffm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The timebases before where only guranteed to be 1/fps precisse
and could cause AV sync errors on low fps
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The new fields are only printed when they differ from their defaults
this way only few fate refs change
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The fate checksum change is due to the header size having been wrong.
Credit&Authorship for the code belongs to Justin Ruggles
Blame for bugs in this merging of the code belong to the Commiter
Commit message by Commiter
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Otherwise, the last byte of each stream is left uninitialized.
Signed-off-by: Nicolas George <nicolas.george@normalesup.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
While a 25 fps stream can in general store frame durations in 1/25
units, this is not true for the timestamps. For example a 25fps
and a 25000/1001 fps stream when they are stored together might have
a matching 0 timestamp point but when for example a chapter from
this is cut the new start is no longer aligned. The issue gets
MUCH worse when the streams are lower fps, like 1 or 2 fps.
This commit thus makes the muxer choose a multiple of the
framerate as timebase that is at least about 20 micro seconds precise
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
With this, when we use a finer timebase than neccessary to store
durations the demuxer still knows what the original timebase was.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This generalizes the previous work on disposition printing.
Disposition flags are shown in a dedicated section, which should improve
output intellegibility, extensibility and filtering operations.
This breaks output syntax with the recently introduced disposition
printing.
Also factorize the common options for the different mov-based tests.
Since the header is now on top in the last generated file, the data
offset in the seek test needed some updates as well.
The YUV channels of VP6 are encoded in a highly linear fashion which does
not have any slice-like concept to thread. The alpha channel of VP6A is
fairly independent of the YUV and comprises 40% of the work. This patch
uses the THREAD_SLICE capability to split the YUV and A decodes into
separate threads.
Two bugs are fixed by splitting YUV and alpha state:
- qscale_table from VP6A decode was for alpha channel instead of YUV
- alpha channel filtering settings were overwritten by YUV header parse
Signed-off-by: Ben Jackson <ben@ben.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is consistent with stdio and is what we want to do in all cases.
Fixes a bug in the voc muxer which didn't flush in write_trailer()
previously. This is the cause of the change in the test results.
