F4V is Adobe's mp4/iso media variant, with the most significant
addition/change being supporting other flash codecs than just
aac/h264.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fragmenting blindly to a certain duration isn't a good choice
if one should be able to switch between different qualities,
therefore default to keyframes instead.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure other sanity checks for conflicting options
can work properly, e.g. for the conflict between the faststart
flag when using the ismv mode.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes the output fragments independent of their position in
the output stream, making the output work better when streamed.
QuickTime Player doesn't support fragmented mp4 without the base
data offset, though.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is a bit more work, but avoids having to fill in
the data offset field afterwards instead of directly when
the rest of the trun atom is written.
This simplifies future cases where this field needs to be set to
something different.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure the faststart vs fragmentation check works as
intended when fragmentation is enabled due to using the ismv mode.
Signed-off-by: Martin Storsjö <martin@martin.st>
This should improve write performance quite significantly.
---
Tested with both writing a normal mp4, by using the faststart
feature and writing a fragmented mp4 file; all turn out with the
same md5sum as before.
Signed-off-by: Martin Storsjö <martin@martin.st>
On failures in the write_trailer function, we could also ignore
the errors and try to finish the file despite these errors (which
would only leave an incomplete chapters track). It's probably better
to signal the error clearly to the caller though (and if this
function failed there's no guarantee that there's enough memory to
finish the trailer either).
Signed-off-by: Martin Storsjö <martin@martin.st>
QuickTime will play multiple audio tracks concurrently if this flag is
set for multiple audio tracks. And if no subtitle track has this flag
set, QuickTime will show no subtitles in the subtitle menu.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Faststart moves the moov atom to the beginning of the file and rewrites
the rest of the file after muxing is complete.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows creation of frame accurate chapter marks from sources
like DVD and BD where the precise chapter location is not known until
the chapter mark has been reached during reading.
Signed-off-by: Martin Storsjö <martin@martin.st>
The mov/mp4 muxer has support for handling negative timestamps
via edit lists (which customarily is used for handling the 1-frame
delay due to B-frames as well).
Using the muxer's native way of handling it is better than using
the generic offsetting. The generic offsetting is a bit too
crude when e.g. the timebase of one track is 1/fps, where the
edit lists can handle it accurately.
Signed-off-by: Martin Storsjö <martin@martin.st>
The previous allocation increment of 16384 meant that the cluster
array was allocated for 0.6 MB initially, which is a bit excessive
for cases with fragmentation where only a fraction of that ever
actually is used.
Therefore, start off at a much smaller value, and increase by
doubling (to avoid reallocating too often when writing long
non-fragmented mp4 files).
Bug-Id: 525
Signed-off-by: Martin Storsjö <martin@martin.st>
When writing fragmented mp4, the cluster array is reset when a
fragment is written. Instead of starting off reallocating the
array only based on the number of current elements in it, keep
track of how many elements there were allocated earlier.
This avoids reallocating this array needlessly when writing
fragmented mp4 files.
Bug-Id: 525
Signed-off-by: Martin Storsjö <martin@martin.st>
According to the PIFF specification[1] the base_data_offset field MUST be
omitteed. See section 5.2.17. Since the ISMV files created by libavformat
state that they are 'piff' compatible via 'ftyp' box, this needs to be
corrected.
[1] http://www.iis.net/learn/media/smooth-streaming/protected-interoperable-file-format
Signed-off-by: Martin Storsjö <martin@martin.st>
This is consistent with stdio and is what we want to do in all cases.
Fixes a bug in the voc muxer which didn't flush in write_trailer()
previously. This is the cause of the change in the test results.
Share the formerly internal write_packet with the hinter and move the
fragment flush logic to the user facing one since it is not concerned
about movtrack-only streams.
Fixes bug #263
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add missing trailing commas, break long codec_tag lines and
add spaces in codec_tag declarations.
Signed-off-by: Martin Storsjö <martin@martin.st>
This isn't exactly equivalent with the earlier code for codecs
other than H264 and VC1, but those are two only codecs supported
by this codepath anyway, and it simplifies it a bit.
Signed-off-by: Martin Storsjö <martin@martin.st>
The other fragmentation options (frag_duration, frag_size and
frag_keyframe) are combined with OR, cutting fragments at the
first of the conditions being fulfilled.
Signed-off-by: Martin Storsjö <martin@martin.st>
For encoding, AVCodecContext.frame_size is the number of input samples to
send to the encoder and does not necessarily correspond directly to the
timestamps of the output packets.
This allows writing QuickTime-compatible fragmented mp4 (with
a non-empty moov atom) to a non-seekable output.
This buffers the mdat for the initial fragment just as it does
for all normal fragments, too. Previously, the resulting
atom structure was mdat,moov, moof,mdat ..., while it now
is moov,mdat, moof,mdat.
Signed-off-by: Martin Storsjö <martin@martin.st>
According to 14496-12, the duration should be all 1s if
the duration is unknown. This is the case if writing a moov
atom without any samples described in it (e.g. as in ismv files).
Signed-off-by: Martin Storsjö <martin@martin.st>
Prefix the functions/tables brktimegm, pcm_read_seek,
dv_offset_reset, voc_get_packet, codec_movaudio_tags,
codec_movvideo_tags.
After this, lavf has no global symbols without the proper prefix.
Signed-off-by: Martin Storsjö <martin@martin.st>
In this mode, no seeks will be done except for within moov/moof
fragments, which should fit within the AVIOContext buffer.
This allows pushing live smooth streaming format data to
a live publishing point on IIS over http.
Signed-off-by: Martin Storsjö <martin@martin.st>
The field frame_size isn't written to the output anywhere except
than in mov.
This facilitates stream copy from formats that don't set frame_size.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add some space around operators and wrap a comment
that extends past the 80 char "limit"/guideline.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes calculation of trackDuration if the MOVIentry array
is cleared. This is required by the fragmentation support in the
next patch.
Signed-off-by: Martin Storsjö <martin@martin.st>
If the creation time is stored in the file as a zero, the
mov demuxer skips exporting the creation time. Currently,
files muxed without a creation time get demuxed with a
Jan 1st 1970 creation timestamp.
Signed-off-by: Martin Storsjö <martin@martin.st>
The 'fiel' atoms can be found in H.264 tracks clobbering the extradata.
MJPEG supports non field based extradata, and this data should be
preserved when copying.
The existing functions defined in intfloat_readwrite.[ch] are
both slow and incorrect (infinities are not handled).
This introduces a new header with fast, inline conversion
functions using direct union punning assuming an IEEE-754
system, an assumption already made throughout the code.
The one use of Intel/Motorola extended 80-bit format is
replaced by simpler code sufficient under the present
constraints (positive normal values).
The old functions are marked deprecated and retained for
compatibility.
Signed-off-by: Mans Rullgard <mans@mansr.com>
If an annex b bitstream is muxed into mov, the actual written
sample is reformatted to mp4 syntax before writing.
Currently, the RTP hints that copy data from the normal video
track, where the payload data might be offset compared to the
original sample that the RTP hinting used (when 3 byte
annex b startcodes have been converted into 4 byte mp4 format
startcodes).
Signed-off-by: Martin Storsjö <martin@martin.st>
This implements reading the tag in the demuxer and adds support for writing it
in the muxer. Some example channel layout tables for muxing are included for
ac3, aac, and alac, but they are not utilized yet.
Use Sound Sample Description Version 2 for all MOV files.
Updated FATE references accordingly.
Note that ADPCM is treated as compressed audio in version 2.
These packets are valid packets, and consist of 1 byte (which
contains the mode bits).
This had been analyzed and reported by Igor Levin, igor d levin comverse com.
Signed-off-by: Martin Storsjö <martin@martin.st>
