the later is not optimal when the buffer size is well known at allocation time
This avoids a memcpy()
Overall 2.5% speedup with a random 1920x1080 video
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit implements intensity stereo coding support
to the native aac encoder. This is a way to increase the efficiency
of the encoder by zeroing the right channel's spectral coefficients
(in a channel pair) and rederiving them in the decoder using information
from the scalefactor indices of special band types. This commit
confomrs to the official ISO 13818-7 specifications, although due to
their ambiguity certain deviations have been taken to ensure maximum
sound quality. This commit has been extensively tested and has shown
to not result in audiable audio artifacts unless in extreme cases.
This commit also adds an option, aac_is, which has the value of
0 by default. Intensity Stereo is part of the scalable aac profile
and is thus non-default.
The way IS coding works is that it rederives the right channel's
spectral coefficients from the left channel via the scalefactor
index values left in the right channel. Since an entire band's
spectral coefficients do not need to be coded, the encoder's
efficiency jumps up and it unzeroes some high frequency values
which it previously did not have enough bits to encode. That way
less information is lost than the information lost by rederiving
the spectral coefficients with some error. This is why the
filesize of files encoded with IS do not decrease significantly.
Users wishing that IS coding should reduce filesize are expected
to reduce their encoding bitrates appropriately.
This is V2 of the commit. The old version did not mark ms_mask as
0 since M/S and IS coding are incompactible, which resulted in
distortions with M/S coding enabled. This version also improves
phase detection by measuring it for every spectral coefficient in
the band and using a simple majority rule to determine whether the
coefficients are in or out of phase. Also, the energy values per
spectral coefficient were changed as to reflect the
official specifications.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit adds support for the coding of intensity stereo spectral
coefficients. It also fixes the Mid/Side coding of band_types higher
than RESERVED_BT (M/S must not be applied to their spectral coefficients,
but marking M/S as present in encode_ms_info() is okay). Much
of the changes here were taken from the decoder and inverted.
This commit does not change the functionality of the decoder as the
previous patch in this series zeroes ms_mask and is_mask.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit finalizes the PNS implementation previously added to the encoder
by moving it to a seperate function search_for_pns() and thus making it
coder-generic. This new implementation makes use of the spread field of
the psy bands and the lambda quality feedback paremeter. The spread of the
spectrum in a band prevents PNS from being used excessively and thus preserve
more phase information in high frequencies. The lambda parameter allows
the number of PNS-marked bands to vary based on the lambda parameter and the
amount of bits available, making better choices on which bands are to be marked
as noise. Comparisons with the previous PNS implementation can be found
here: https://trac.ffmpeg.org/attachment/wiki/Encode/AAC/
This is V2 of the patch, the changes from the previous version being that this
version uses the new band->spread metric from aacpsy and normalizes the
energy using the group size. These changes were suggested by Claudio Freire
on the mailing list. Another change is the use of lambda to alter the
frequency threshold. This change makes the actual threshold frequencies
vary between +-2Khz of what's specified, depending on frame encoding performance.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit undoes commit c5d4f87e81
and removes PNS band marking from the twoloop coder, which has
been reimplemented in a better way in this series of patches.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit enables the function added with commit 7c10b87 and uses that
new function for setting any special scalefactor indices. This commit does
not change the behaviour of the encoder since no bands are being marked as
either NOISE_BT(due to the previous PNS implementation removed in the
previous commit) or INTENSITY_BT2/INTENSITY_BT.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Newer versions of the nvenc hardware support The High 444 Predictive profile
of H.264, and can also do lossless encoding under this profile if desired.
This change introduces support for the profile, and exposes the appropriate
presets for requesting lossless encoding.
I tested lossless by generating a baseline sample with testsrc converted
to raw yuv444p, then encoded the sample with nvenc, then did a framemd5
comparision of both the raw video and the nvenc encode. The framemd5
reports were identical.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
* commit 'f046c3b5ac36848cce824b008e0347c621523041':
lavc: Move deprecation warning disabling to files including the table
lavc: Disable deprectation warnings coming from options table
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This commit resets any bands marked as M/S or IS upon encoding a frame.
This is needed because the arrays may contain some residual information
upon allocation on startup and because there isn't any mechanism to
reset the arrays once the frame has been encoded.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There were some mistakes in the code for M/S stereo, this commit fixes them.
The start variable was not being reset for every window and every access to
the coefficients was incorrect as well. This fixes that by properly
addressing the coefficients using both windows and setting the start on every window to zero.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This commit modifies 02dbed6 to use band->active_lines to better gauge how much information is contained within a single band and thus allow the perceptual noise subsitution to more accurately determine which bands to code as noise. The spread[w+g] used before this patch behaved more like a low-pass filter for PNS band_types, which could mistakingly mark some low frequency bands as noise.
Reviewed-by: Claudio Freire <klaussfreire@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '80f955c90867561dcce769216bc497e13281eb38':
vda: Check the correct pointer for buffer allocation
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The loop always needs at least 8 bytes for chunk_type and chunk_size.
If fewer are left, bytestream2_get_le32 just returns 0 without
reading any bytes, leading to an infinite loop.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Every chunk needs at least 8 bytes for chunk_type and chunk_size.
Prevent a possible infinite loop.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
They are used by dnxhd and mpegvideo_enc exclusively, move them to codec
private options instead.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
More than 32 bits can't be stored in an integer and get_bits should not
be used with more than 25 bits.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Now ff_qsv_init_internal_session() is able
to find appropriate display handle under linux using VAAPI.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This also simplifies the code
Fixes: signal_sigabrt_7ffff6ac8cc9_2943_cov_3588637614_mss2_speech.wmv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '9eec23b8a7fd0f91827bbc3ed0792c39a8cc9a8a':
g2meet: use av_ceil_log2 instead of a custom function
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch adds MSA (MIPS-SIMD-Arch) optimizations for mpegvideo functions in new file mpegvideo_msa.c
Signed-off-by: Shivraj Patil <shivraj.patil@imgtec.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3f872c9bfa8ee1032058cfa48068b5a73ef27b5e':
lavc: Add missing API guard to dtg_active_format option
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes out of array access
Fixes: signal_sigsegv_3670fc0_2818_cov_2307326154_moon.mux
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
