The new requirements are also automatically inherited
by the FATE_SEEK_LAVF_VIDEO seek-tests.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This automatically fixes the requirements of the fate-seek-acodec*
tests (e.g. 16 of the 27 such tests are now automatically disabled
if the aresample filter is disabled).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This automatically fixes the requirements of the fate-seek-vsynth*
tests (e.g. 16 of the 49 such tests are now automatically disabled
if the scale filter is disabled).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If one uses a -s command, a scale filter is inserted
even when doing so is redundant. This patch stops
doing so. This makes the tests that don't need libswscale
actually succeed in case it is disabled (only 315 of 470 tests
need it).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Most of the tests in seek.mak use files created by other tests
as input. Therefore these tests have the other tests as prerequisite
and duplicate their CONFIG-requirements. This duplication is of course
bad as usual, so stop it by using the corresponding variable
that contains the non-seek-tests that are enabled to filter out all
the seek-tests without a corresponding enabled non-seek test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The output files of the lavf tests are highly regular,
allowing to use rules for the src files instead of a list.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Each of the intermediately generated lena-*.fits files is only used
for exactly one test; so it could be deleted right after the test.
Switching to a transcode test (which is also more natural) achieves
this. It also adds checksums of the intermediate files to the ref-file.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In particular, add the missing dependency on the scale and
aresample filters (and therefore on libswscale resp. libswresample).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In particular, add the missing dependency on the scale filter
(and therefore on libswscale).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Intended for scenarios that currently use DEMDEC, but are missing
the requirements that are implicitly needed by framecrc.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add a parameter that allows to add additional requirements.
Also add FILE_PROTOCOL to all the auxiliary functions
that use a demuxer.
Also fix the requirements for the fate-mpegts-probe-(latm|program)
tests. They have misused DEMDEC.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In particular, add the missing dependency on the scale filter
(and therefore on libswscale).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also fix the requirements of fate-mov-channel-description:
It needs the pcm_s16le decoder and the mov demuxer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
And drop the FATE_CAF_REMUX variables which only existed
to avoid having to repeat the common FILE_PROTOCOL PIPE_PROTOCOL
FRAMECRC_MUXER stuff.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It also adds the missing depenencies on the file and pipe protocols
and the framecrc muxer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Tests using the transcode and stream_remux functions have some common
requirements (namely the file and pipe protocols as well as the framecrc
muxer) and also other commonalities: The create a file and read it
immediately afterwards, so that they typically rely on a corresponding
muxer+demuxer pair which typically shares the same name; for transcode
(if it does not use stream copy) the same is true for encoders and
decoders. This means that using special Makefile-functions instead
of the general ALLYES is worthwhile. This commit adds such functions.
These functions allow to add arbitrary CONFIG-checks on top of the
aforementioned ones in order to satisfy special needs (for e.g. parsers,
filters) that several intended users have.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The test also requires a png decoder, which often can be disabled in
cross building setups, where zlib might be missing.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is mostly straightforward. The major complication is that, as a
result of the 16-bit chunk size limitation, ICC profiles may need to be
split up into multiple chunks.
We also need to make sure to allocate enough extra space in the packet
to fit the ICC profile, so modify both mpegvideo_enc.c and ljpegenc.c to
take into account this extra overhead, failing cleanly if necessary.
Also add a FATE transcode test to ensure that the ICC profile gets
written (and read) correctly. Note that this ICC profile is smaller than
64 kB, so this doesn't test the APP2 chunk re-arranging code at all.
Signed-off-by: Niklas Haas <git@haasn.dev>
We re-use the PNGEncContext.zstream for deflate-related operations.
Other than that, the code is pretty straightforward. Special care needs
to be taken to avoid writing more than 79 characters of the profile
description (the maximum supported).
To write the (dynamically sized) deflate-encoded data, we allocate extra
space in the packet and use that directly as a scratch buffer. Modify
png_write_chunk slightly to allow pre-writing the chunk contents like
this.
Also add a FATE transcode test to ensure that the ICC profile gets
encoded correctly.
Signed-off-by: Niklas Haas <git@haasn.dev>
On empty input the awk script was always successful which caused the
filter-refcmp tests to always succeed.
Also fix the command lines for refcmp_metadata compare function because it
needs auto conversion filters, and update reference of test
filter-refcmp-psnr-rgb because it was missed in
a7fc78c1a6 but was never noticed due to the
original issue...
Signed-off-by: Marton Balint <cus@passwd.hu>
Calculate Spatial Info (SI) and Temporal Info (TI) scores for a video, as defined
in ITU-T P.910: Subjective video quality assessment methods for multimedia
applications.
This test deliberately doesn't exercise the full range of inputs described in
the committee draft VC-1 standard. It says:
input coefficients in frequency domain, D, satisfy -2048 <= D < 2047
intermediate coefficients, E, satisfy -4096 <= E < 4095
fully inverse-transformed coefficients, R, satisfy -512 <= R < 511
For one thing, the inequalities look odd. Did they mean them to go the
other way round? That would make more sense because the equations generally
both add and subtract coefficients multiplied by constants, including powers
of 2. Requiring the most-negative values to be valid extends the number of
bits to represent the intermediate values just for the sake of that one case!
For another thing, the extreme values don't look to occur in real streams -
both in my experience and supported by the following comment in the AArch32
decoder:
tNhalf is half of the value of tN (as described in vc1_inv_trans_8x8_c).
This is done because sometimes files have input that causes tN + tM to
overflow. To avoid this overflow, we compute tNhalf, then compute
tNhalf + tM (which doesn't overflow), and then we use vhadd to compute
(tNhalf + (tNhalf + tM)) >> 1 which does not overflow because it is
one instruction.
My AArch64 decoder goes further than this. It calculates tNhalf and tM
then does an SRA (essentially a fused halve and add) to compute
(tN + tM) >> 1 without ever having to hold (tNhalf + tM) in a 16-bit element
without overflowing. It only encounters difficulties if either tNhalf or
tM overflow in isolation.
I haven't had sight of the final standard, so it's possible that these
issues were dealt with during finalisation, which could explain the lack
of usage of extreme inputs in real streams. Or a preponderance of decoders
that only support 16-bit intermediate values in their inverse transforms
might have caused encoders to steer clear of such cases.
I have effectively followed this approach in the test, and limited the
scale of the coefficients sufficient that both the existing AArch32 decoder
and my new AArch64 decoder both pass.
Signed-off-by: Ben Avison <bavison@riscosopen.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
Note that the benchmarking results for these functions are highly dependent
upon the input data. Therefore, each function is benchmarked twice,
corresponding to the best and worst case complexity of the reference C
implementation. The performance of a real stream decode will fall somewhere
between these two extremes.
Signed-off-by: Ben Avison <bavison@riscosopen.org>
Signed-off-by: Martin Storsjö <martin@martin.st>
tiny_ssim is built for the build host, not for the target platform.
Therefore, it mustn't include the config.h header, which is set up
specifically for the target platform and compiler.
This fixes cross building for older WinStore platforms, where
config.h contains "#define getenv(x) NULL".
Signed-off-by: Martin Storsjö <martin@martin.st>
