The constants used in the decoder used floating point precision,
and this caused different values to be generated on different
architectures. Additionally on big endian machines, the fate test
would output bytes in native order, which is different from the one
hardcoded in the test.
So, eradicate floating point numbers and use fixed point (32.32)
arithmetics everywhere, replacing constants with precomputed integer
values, and force the pixel format output to be the same in the fate
test.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Previously, all link-time dependencies were added for all libraries,
resulting in bogus link-time dependencies since not all dependencies
are shared across libraries. Also, in some cases like libavutil, not
all dependencies were taken into account, resulting in some cases of
underlinking.
To address all this mess a machinery is added for tracking which
dependency belongs to which library component and then leveraged
to determine correct dependencies for all individual libraries.
When building DLLs with MSVC, CONFIG_STATIC is disabled (see
d66c52c2b3 for a more verbose explanation) since the built
object files can't be linked statically (which checkasm does).
This worked up until recently, only by luck.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use a tab instead of two spaces, skip the fate prefix for the test name.
This makes IGNORE line fit in even better with the other make printouts.
Signed-off-by: Martin Storsjö <martin@martin.st>
Otherwise the .rep file would still contain a signal instead of a
zero, even if the process returned success.
Signed-off-by: Martin Storsjö <martin@martin.st>
This can be useful to filter out noise in known-broken scenarios like
miscompilation by legacy compilers and similar.
Originally based on a patch by Diego Biurrun.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Make the one-time initialization in av_get_cpu_flags() thread-safe. The
static variables |flags|, |cpuflags_mask|, and |checked| in
libavutil/cpu.c are read and written using normal load and store
operations. These are considered as data races. The fix is to use atomic
load and store operations.
Remove the |checked| variable because the invalid value of -1 for
|flags| can be used to indicate the same condition. Rename |flags| to
|cpu_flags| and move it to file scope.
The fix can be verified by running the libavutil/tests/cpu_init.c test
program under ThreadSanitizer:
./configure --toolchain=clang-tsan
make libavutil/tests/cpu_init
libavutil/tests/cpu_init
There should be no warnings from ThreadSanitizer.
Co-author: Dmitry Vyukov of Google, who suggested the data race fix.
Signed-off-by: Wan-Teh Chang <wtc@google.com>
Supporting the system was a nice joke for the 9 release, but it has
run its course. Nowadays Plan 9 receives no testing and has no
practical usefulness.
This work is sponsored by, and copyright, Google.
Previously all subpartitions except the eob=1 (DC) case ran with
the same runtime:
Cortex A7 A8 A9 A53
vp9_inv_dct_dct_16x16_sub16_add_neon: 3188.1 2435.4 2499.0 1969.0
vp9_inv_dct_dct_32x32_sub32_add_neon: 18531.7 16582.3 14207.6 12000.3
By skipping individual 4x16 or 4x32 pixel slices in the first pass,
we reduce the runtime of these functions like this:
vp9_inv_dct_dct_16x16_sub1_add_neon: 274.6 189.5 211.7 235.8
vp9_inv_dct_dct_16x16_sub2_add_neon: 2064.0 1534.8 1719.4 1248.7
vp9_inv_dct_dct_16x16_sub4_add_neon: 2135.0 1477.2 1736.3 1249.5
vp9_inv_dct_dct_16x16_sub8_add_neon: 2446.7 1828.7 1993.6 1494.7
vp9_inv_dct_dct_16x16_sub12_add_neon: 2832.4 2118.3 2266.5 1735.1
vp9_inv_dct_dct_16x16_sub16_add_neon: 3211.7 2475.3 2523.5 1983.1
vp9_inv_dct_dct_32x32_sub1_add_neon: 756.2 456.7 862.0 553.9
vp9_inv_dct_dct_32x32_sub2_add_neon: 10682.2 8190.4 8539.2 6762.5
vp9_inv_dct_dct_32x32_sub4_add_neon: 10813.5 8014.9 8518.3 6762.8
vp9_inv_dct_dct_32x32_sub8_add_neon: 11859.6 9313.0 9347.4 7514.5
vp9_inv_dct_dct_32x32_sub12_add_neon: 12946.6 10752.4 10192.2 8280.2
vp9_inv_dct_dct_32x32_sub16_add_neon: 14074.6 11946.5 11001.4 9008.6
vp9_inv_dct_dct_32x32_sub20_add_neon: 15269.9 13662.7 11816.1 9762.6
vp9_inv_dct_dct_32x32_sub24_add_neon: 16327.9 14940.1 12626.7 10516.0
vp9_inv_dct_dct_32x32_sub28_add_neon: 17462.7 15776.1 13446.2 11264.7
vp9_inv_dct_dct_32x32_sub32_add_neon: 18575.5 17157.0 14249.3 12015.1
I.e. in general a very minor overhead for the full subpartition case due
to the additional loads and cmps, but a significant speedup for the cases
when we only need to process a small part of the actual input data.
In common VP9 content in a few inspected clips, 70-90% of the non-dc-only
16x16 and 32x32 IDCTs only have nonzero coefficients in the upper left
8x8 or 16x16 subpartitions respectively.
Signed-off-by: Martin Storsjö <martin@martin.st>
This reverts commit 81d7f0bbca.
Instead of just benchmarking dc separately, test all relevant subparts
(in the next commit).
Signed-off-by: Martin Storsjö <martin@martin.st>
If makeopts_fate is set, these makeopts are used for running the
tests instead of the normal makeopts. If it isn't set, the normal
makeopts variable is used as before.
This is useful if remote testing on a lesser machine where a large
number of parallel jobs might be undesireable, while wanting to speed
up the build with many parallel processes.
Signed-off-by: Martin Storsjö <martin@martin.st>
The dc-only mode is already checked to work correctly above, but this
allows benchmarking this mode for performance tuning, and allows making
sure that it actually is correctly hooked up.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes it match the pattern already used for VP8 MC functions.
This also makes the signature match ffmpeg's version of these
functions, easing porting of code in both directions.
Signed-off-by: Martin Storsjö <martin@martin.st>
This matrix needs to be applied after all others have (currently only
display matrix from trak), but cannot be handled in movie box, since
streams are not allocated yet. So store it in main context, and apply
it when appropriate, that is after parsing the tkhd one.
Fate tests are updated accordingly.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
x29 (FP) is a callee saved register and should be restored on
return. Instead of backing up x29 and restoring it here, back up
sp in a register that we are allowed to overwrite.
This fixes crashes in checkasm on aarch64 since f1b3e13138.
For some reason, gcc builds didn't crash, but clang builds do.
Signed-off-by: Martin Storsjö <martin@martin.st>
This, combined with clobbering the stack space prior to the call,
increases the chances of finding cases where 32 bit parameters
are erroneously treated as 64 bit.
Signed-off-by: Martin Storsjö <martin@martin.st>
Even if MAX_ARGS - 2 (for arm) or MAX_ARGS - 7 (for aarch64) parameters
are passed on the stack to checkasm_checked_call, we actually only
need to store MAX_ARGS - 4 (for arm) or MAX_ARGS - 8 (for aarch64)
parameters on the stack when calling the tested function.
Signed-off-by: Martin Storsjö <martin@martin.st>
