E.g. the inclusion of parser.h comes from a time when
the parser used a H264Context.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is only needed by h264_cabac.c and h264_cavlc.c.
Also fix up the other headers while at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This allows to remove the spurious dependencies of mpegvideo encoders
on error_resilience; some other components that do not use mpegvideo
to its fullest turned out to not need it either.
Adding a new CONFIG_EXTRA needs a reconfigure to take effect.
In order to force this a few unnecessary headers from lavfi/allfilters.c
have been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If slice_type is > 9, the access to ff_h264_golomb_to_pict_type is
out-of-bounds. Fix this by simply setting the slice_type to 0 in this
case.
This is completely inconsequential because the value is only being used
to being used as an offset in the calculation of the film grain seed
value, a corruption of which is practically invisible.
Fixes coverity ticket #1490802
Signed-off-by: James Almer <jamrial@gmail.com>
Because we need access to ref frames without film grain applied, we have
to add an extra AVFrame to H264Picture to avoid messing with the
original. This requires some amount of overhead to make the reference
moves work out, but it allows us to benefit from frame multithreading
for film grain application "for free".
Unfortunately, this approach requires twice as much RAM to be constantly
allocated for ref frames, due to the need for an extra buffer per
H264Picture. In theory, we could get away with freeing up this memory as
soon as it's no longer needed (since ref frames do not need film grain
buffers any longer), but trying to call ff_thread_release_buffer() from
output_frame() conflicts with possible later accesses to that same frame
and I'm not sure how to synchronize that well.
Tested on all three cases of (no fg), (fg present but exported) and (fg
present and not exported), with and without threading.
Co-authored-by: James Almer <jamrial@gmail.com>
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: James Almer <jamrial@gmail.com>
From SMPTE RDD 5-2006, the grain seed is to be computed from the
following definition of `pic_offset`:
> When decoding H.264 | MPEG-4 AVC bitstreams, pic_offset is defined as
> follows:
> - pic_offset = PicOrderCnt(CurrPic) + (PicOrderCnt_offset << 5)
> where:
> - PicOrderCnt(CurrPic) is the picture order count of the current frame,
> which shall be derived from [the video stream].
>
> - PicOrderCnt_offset is set to idr_pic_id on IDR frames. idr_pic_id
> shall be read from the slice header of [the video stream]. On non-IDR I
> frames, PicOrderCnt_offset is set to 0. A frame shall be classified as I
> frame when all its slices are I slices, which may be optionally
> designated by setting primary_pic_type to 0 in the access delimiter NAL
> unit. Otherwise, PicOrderCnt_offset it not changed. PicOrderCnt_offset is
> updated in decoding order.
Co-authored-by: James Almer <jamrial@gmail.com>
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes: out of array read
Fixes: 36341/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_H264_fuzzer-6737583085322240
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Given that the AVCodec.next pointer has now been removed, most of the
AVCodecs are not modified at all any more and can therefore be made
const (as this patch does); the only exceptions are the very few codecs
for external libraries that have a init_static_data callback.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Commit 601c238854 added support for AV_PKT_DATA_NEW_EXTRADATA, but
only for avcC extradata.
This commit adds support for sps/pps extradata as well. This makes
support consistent for passing new extradata consistent with the
types of extradata that can be passed when initializing the decoder.
Signed-off-by: Oliver Woodman <ollywoodman@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
then ff_h264_free_tables() and h264_decode_end() can be removed
in h264_decode_init() if it's failed.
The FF_CODEC_CAP_INIT_CLEANUP flag is need for single thread, For multithread,
it'll be cleanup still by AV_CODEC_CAP_FRAME_THREADS flag if have.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
It represents the relationship between them more naturally and will be
useful in the following commits.
Allows significantly more frames in fate-h264-attachment-631 to be
decoded.
Such errors are not necessarily fatal and decoding might still be
possible, e.g. it happens for MVC streams where we do not handle the
subset SPS thus failing to parse its corresponding PPS.
The current design, where
- proper init is called for the first per-thread context
- first thread's private data is copied into private data for all the
other threads
- a "fixup" function is called for all the other threads to e.g.
allocate dynamically allocated data
is very fragile and hard to follow, so it is abandoned. Instead, the
same init function is used to init each per-thread context. Where
necessary, AVCodecInternal.is_copy can be used to differentiate between
the first thread and the other ones (e.g. for decoding the extradata
just once).
as well as includes of libavutil/timer.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
set AVFrame decode_error_flags in case h->slice_ctx->er.error_occurred is set
after the call to ff_h264_execute_decode_slices. This allows the user to detect
concealed decoding errors in the call to avcodec_receive_frame
Signed-off-by: Amir Pauker <amir@livelyvideo.tv>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is in preparation for a patch for cbs_h2645. Now the packet's
rbsp_buffer can be owned by an AVBuffer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@googlemail.com>
This error isn't particularly helpful as checking for mixed IDR/non-IDR
NALUs would need to be done at a higher level to actually be accurate.
Removing the error allows an API user to send individual slice NALUs
(i.e. incomplete frames) so they can take advantage of slice
threading. The ticket which this error was added for (#4408) no
longer segfaults after removing this error (as the bug was likely
fixed more properly elsewhere).
AVHWAccel.end_frame can run on a worker thread. The assumption of the
frame threading code is that the worker thread will change the AVFrame
image data, not the AVFrame fields. So the AVFrame fields are not synced
back to the main thread. But this breaks videotoolbox due to its special
requirements (everything else is fine). It actually wants to update
AVFrame fields.
The actual videotoolbox frame is now stored in the dummy AVBufferRef, so
it mimics what happens in non-videotoolbox cases. (Changing the
AVBufferRef contents is a bit like changing the image data.) The
post_process callback copies that reference to the proper AVFrame field.
Based on a patch by wm4.
Signed-off-by: Aman Gupta <aman@tmm1.net>
This provides a generic way to the API user to deal with files that
either lack this SEI, or which have the SEI only in packets not passed
to the decoder (such as the common case of the SEI being in the very
firsat video packet, but decoding is started somewhere in the middle of
the file). Bugs like 840b41b2a6 make this
somewhat of a necessity.
This intentionally uses the version in the SEI instead, if any is found.
This includes a pointer to the associated hwaccel for decoders using
hwaccels - these will be used later to implement the hwaccel setup
without needing a global list.
Also added is a new file listing all hwaccels as external declarations -
this will be used later to generate the hwaccel list at configure time.
This callback will be used by the VideoToolbox H264 hwaccel so that it
can receive SPS and PPS NALUs. VideoToolbox requires PPS changes to be
fed into the decoder session, and for the session to be recreated when
the SPS changes.
Signed-off-by: Aman Gupta <aman@tmm1.net>
The only reason videotoolbox wouldn't produce frames is if the data fed
to it was invalid, so returning AVERROR_INVALIDDATA makes sense here.
Further, it means AVERROR_EXTERNAL can be used in further commits to signal
fatal VideoToolbox errors, letting the user know that they need to fallback to
another decoder.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
