From x86inc:
> On AMD cpus <=K10, an ordinary ret is slow if it immediately follows either
> a branch or a branch target. So switch to a 2-byte form of ret in that case.
> We can automatically detect "follows a branch", but not a branch target.
> (SSSE3 is a sufficient condition to know that your cpu doesn't have this problem.)
x86inc can automatically determine whether to use REP_RET rather than
REP in most of these cases, so impact is minimal. Additionally, a few
REP_RETs were used unnecessary, despite the return being nowhere near a
branch.
The only CPUs affected were AMD K10s, made between 2007 and 2011, 16
years ago and 12 years ago, respectively.
In the future, everyone involved with x86inc should consider dropping
REP_RETs altogether.
This commit enabled assembly code with intel AVX512 VNNI and added unit test for sobel filter
sobel_c: 4537
sobel_avx512icl 2136
Signed-off-by: bwang30 <bin.wang@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The only system which benefit from these are truely ancient
32bit x86s as all other systems use at least the SSE2 versions
(this includes all x64 cpus (which is why this code is restricted
to x86-32)).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The only system which benefit from these are truely ancient
32bit x86s as all other systems use at least the SSE2 versions
(this includes all x64 cpus (which is why this code is restricted
to x86-32)).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The only system which benefit from these are truely ancient
32bit x86s as all other systems use at least the SSE2 versions
(this includes all x64 cpus (which is why this code is restricted
to x86-32)).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
x64 always has MMX, MMXEXT, SSE and SSE2 and this means
that some functions for MMX, MMXEXT and 3dnow are always
overridden by other functions (unless one e.g. explicitly
disables SSE2) for x64. So given that the only systems that
benefit from process_mmxext are truely ancient 32bit x86s
it is removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
x64 always has MMX, MMXEXT, SSE and SSE2 and this means
that some functions for MMX, MMXEXT and 3dnow are always
overridden by other functions (unless one e.g. explicitly
disables SSE2) for x64. So given that the only systems that
benefit from line_noise_mmx are truely ancient 32bit x86s
it is removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Only the AudioFIRDSPContext and the functions for its initialization
are needed outside of lavfi/af_afir.c.
Also rename the header to af_afirdsp.h to reflect the change.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
I spotted an interesting pattern that I didn't see before that leads to the implementation being faster.
The bit shifting table I was using before is no longer needed, and was able to remove quite a few lines.
I also add use of FMA on the AVX2 version.
f32 1920x1080 1 thread with prelut
c impl
1434012700 UNITS in lut3d->interp, 1 runs, 0 skips
1434035335 UNITS in lut3d->interp, 2 runs, 0 skips
1423615347 UNITS in lut3d->interp, 4 runs, 0 skips
1426268863 UNITS in lut3d->interp, 8 runs, 0 skips
sse2
905484420 UNITS in lut3d->interp, 1 runs, 0 skips
905659010 UNITS in lut3d->interp, 2 runs, 0 skips
915167140 UNITS in lut3d->interp, 4 runs, 0 skips
915834222 UNITS in lut3d->interp, 8 runs, 0 skips
avx
574794860 UNITS in lut3d->interp, 1 runs, 0 skips
581035090 UNITS in lut3d->interp, 2 runs, 0 skips
584116720 UNITS in lut3d->interp, 4 runs, 0 skips
581460290 UNITS in lut3d->interp, 8 runs, 0 skips
avx2
301698880 UNITS in lut3d->interp, 1 runs, 0 skips
301982880 UNITS in lut3d->interp, 2 runs, 0 skips
306962430 UNITS in lut3d->interp, 4 runs, 0 skips
305472025 UNITS in lut3d->interp, 8 runs, 0 skips
gbrap16 1920x1080 1 thread with prelut
c impl
1480894840 UNITS in lut3d->interp, 1 runs, 0 skips
1502922990 UNITS in lut3d->interp, 2 runs, 0 skips
1496114307 UNITS in lut3d->interp, 4 runs, 0 skips
1492554551 UNITS in lut3d->interp, 8 runs, 0 skips
sse2
980777180 UNITS in lut3d->interp, 1 runs, 0 skips
986121520 UNITS in lut3d->interp, 2 runs, 0 skips
986489840 UNITS in lut3d->interp, 4 runs, 0 skips
998832248 UNITS in lut3d->interp, 8 runs, 0 skips
avx
622212360 UNITS in lut3d->interp, 1 runs, 0 skips
622981160 UNITS in lut3d->interp, 2 runs, 0 skips
645396315 UNITS in lut3d->interp, 4 runs, 0 skips
641057075 UNITS in lut3d->interp, 8 runs, 0 skips
avx2
321336400 UNITS in lut3d->interp, 1 runs, 0 skips
321268920 UNITS in lut3d->interp, 2 runs, 0 skips
323459895 UNITS in lut3d->interp, 4 runs, 0 skips
324949967 UNITS in lut3d->interp, 8 runs, 0 skips
The problem was caused by if the width of the processed block
minus 1 is a multiple of the aligned number the instruction
jle .bscale_scalar would skip the Optimized Loop Step, which
will lead to an incorrect sampling when specifying steps more
than 1. Move the Optimized Loop Step after .bscale_scalar to
ensure the loop step is enabled.
Signed-off-by: Wu Jianhua <jianhua.wu@intel.com>
We introduced a ff_horiz_slice_avx2/512() implemented on a new algorithm.
In a nutshell, the new algorithm does three things, gathering data from
8/16 rows, blurring data, and scattering data back to the image buffer.
Here we used a customized transpose 8x8/16x16 to avoid the huge overhead
brought by gather and scatter instructions, which is dependent on the
temporary buffer called localbuf added newly.
Performance data:
ff_horiz_slice_avx2(old): 109.89
ff_horiz_slice_avx2(new): 666.67
ff_horiz_slice_avx512: 1000
Co-authored-by: Cheng Yanfei <yanfei.cheng@intel.com>
Co-authored-by: Jin Jun <jun.i.jin@intel.com>
Signed-off-by: Wu Jianhua <jianhua.wu@intel.com>
The new vertical slice with AVX2/512 acceleration can significantly
improve the performance of Gaussian Filter 2D.
Performance data:
ff_verti_slice_c: 32.57
ff_verti_slice_avx2: 476.19
ff_verti_slice_avx512: 833.33
Co-authored-by: Cheng Yanfei <yanfei.cheng@intel.com>
Co-authored-by: Jin Jun <jun.i.jin@intel.com>
Signed-off-by: Wu Jianhua <jianhua.wu@intel.com>
x86_32 ABI does not pass float arguments directly on xmm regs, and the Win64
ABI uses only the first four regs for this purpose.
Signed-off-by: James Almer <jamrial@gmail.com>
This fixes the tests filter-refcmp-ssim-yuv and filter-refcmp-ssim-rgb
on i386 after breaking in fcc0424c93.
Signed-off-by: Martin Storsjö <martin@martin.st>
