This field is currently used by checks
- skipping packets before the first keyframe
- skipping packets before start time
to test whether any packets have been output already. But since
frame_number is incremented after the bitstream filters are applied
(which may involve delay), this use is incorrect. The keyframe check
works around this by adding an extra flag, the start-time check does
not.
Simplify both checks by replacing the seen_kf flag with a flag tracking
whether any packets have been output by do_streamcopy().
The width and height for qsv frame to download need to be
aligned with 16. Add the alignment operation.
Now the following command works:
ffmpeg -hwaccel qsv -f rawvideo -s 1920x1080 -pix_fmt yuv420p -i \
input.yuv -vf "hwupload=extra_hw_frames=16,format=qsv,hwdownload, \
format=nv12" -f null -
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Do this by switching to bytestream2_(get|put)_le32u() from
bytestream2_(get|put)_le32(); it has after all already been checked
that the packet contains at least a full header, making all
the implicit checks in bytestream2_(get|put)_le32() dead code.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Therefore move the (Get|Put)ByteContext from the context to the stack.
It is transient anyway.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Reviewed-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This patch adds support for:
- ffplay ipfs://<cid>
- ffplay ipns://<cid>
IPFS data can be played from so called "ipfs gateways".
A gateway is essentially a webserver that gives access to the
distributed IPFS network.
This protocol support (ipfs and ipns) therefore translates
ipfs:// and ipns:// to a http:// url. This resulting url is
then handled by the http protocol. It could also be https
depending on the gateway provided.
To use this protocol, a gateway must be provided.
If you do nothing it will try to find it in your
$HOME/.ipfs/gateway file. The ways to set it manually are:
1. Define a -gateway <url> to the gateway.
2. Define $IPFS_GATEWAY with the full http link to the gateway.
3. Define $IPFS_PATH and point it to the IPFS data path.
4. Have IPFS running in your local user folder (under $HOME/.ipfs).
Signed-off-by: Mark Gaiser <markg85@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The lensfun filter, at present, loads its database from a path hardcoded
at build time. This may not be known or available to end users.
Added option db_path allows custom path.
The test also requires a png decoder, which often can be disabled in
cross building setups, where zlib might be missing.
Signed-off-by: Martin Storsjö <martin@martin.st>
SEI messages are naturally byte-aligned by adding padding bits
to achieve byte-alignment. The parsing code in libavcodec/hevc_sei.c
nevertheless uses a GetBitContext to read it. When doing so, parsing
the next SEI message starts exactly at the position where reading
the last message (if any) ended.
This means that one would have to handle both the payload extension data
(which makes most SEI messages extensible structs) as well as the
padding bits for byte-alignment. Yet our SEI parsing code in
libavcodec/hevc_sei.c does not read these at all. Instead several of
the functions used for parsing specific SEI messages use
skip_bits_long(); some don't use it at all, in which case it is possible
for the GetBitContext to not be byte-aligned at the start of the next
SEI message (the parsing code for several types of SEI messages relies
on byte-alignment).
Fix this by always using a dedicated GetBitContext per SEI message;
skipping the necessary amount of bytes in the NALU context
is done at a higher level. This also allows to remove unnecessary
parsing code that only existed in order to skip enough bytes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is mostly straightforward. The major complication is that, as a
result of the 16-bit chunk size limitation, ICC profiles may need to be
split up into multiple chunks.
We also need to make sure to allocate enough extra space in the packet
to fit the ICC profile, so modify both mpegvideo_enc.c and ljpegenc.c to
take into account this extra overhead, failing cleanly if necessary.
Also add a FATE transcode test to ensure that the ICC profile gets
written (and read) correctly. Note that this ICC profile is smaller than
64 kB, so this doesn't test the APP2 chunk re-arranging code at all.
Signed-off-by: Niklas Haas <git@haasn.dev>
We re-use the PNGEncContext.zstream for deflate-related operations.
Other than that, the code is pretty straightforward. Special care needs
to be taken to avoid writing more than 79 characters of the profile
description (the maximum supported).
To write the (dynamically sized) deflate-encoded data, we allocate extra
space in the packet and use that directly as a scratch buffer. Modify
png_write_chunk slightly to allow pre-writing the chunk contents like
this.
Also add a FATE transcode test to ensure that the ICC profile gets
encoded correctly.
Signed-off-by: Niklas Haas <git@haasn.dev>
max_14bit_constraint_flag should be set if the bit depth is not greater than
14 (currently always true).
one_picture_only_flag should not be set because we don't support the still
picture profiles.
general_profile_compatibility_flag should be set according to general_profile_idc
instead of bit depth.
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
The block size can be dependent on the profile and entrypoint selected.
It defaults to 16x16, with codecs able to override this choice with their
own function.
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
Use GPB frames to replace regular P/B frames if backend driver does not
support it.
- GPB:
Generalized P and B picture. Regular P/B frames replaced by B
frames with previous-predict only, L0 == L1. Normal B frames
still have 2 different ref_lists and allow bi-prediction
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Fei Wang <fei.w.wang@intel.com>
This will allow using a common threaded decode or encode function from most
codecs using texture DSP functions.
Signed-off-by: Marton Balint <cus@passwd.hu>
On empty input the awk script was always successful which caused the
filter-refcmp tests to always succeed.
Also fix the command lines for refcmp_metadata compare function because it
needs auto conversion filters, and update reference of test
filter-refcmp-psnr-rgb because it was missed in
a7fc78c1a6 but was never noticed due to the
original issue...
Signed-off-by: Marton Balint <cus@passwd.hu>
on glibc memory.h drags in string.h, but codec2 does not use any
str* or mem* functions. additionally, memory.h is not part of the
C99 or POSIX standards.
Signed-off-by: Marton Balint <cus@passwd.hu>
'current_next_indicator' of 0 (next) on each section header indicates
the service information is for immediate future one.
ffmpeg doesn't need to parse it but current (1) one.
ref: section 5.1.1 of DVB BlueBook A038 (EN 300 468)
Signed-off-by: TADANO Tokumei <aimingoff@pc.nifty.jp>
Signed-off-by: Marton Balint <cus@passwd.hu>
Current code incorrectly check against end of section rather than
end of descriptor.
Signed-off-by: TADANO Tokumei <aimingoff@pc.nifty.jp>
Signed-off-by: Marton Balint <cus@passwd.hu>
