Similar to 4c9c4fe8b21, but for durations. This fixes#7151, where
the report duration and bitrate on a mpegts stream is wildly off
due to the dvb_teletext stream's timings.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In write only mode, the TCP receive buffer's data keeps growing with
http response messages and the buffer eventually becomes full.
This results in zero tcp window size, which in turn causes unwanted
issues, like, terminated tcp connection. The issue is apparent when
http persistent connection is enabled in hls/dash live streaming use
cases. To overcome this issue, the logic here reads the buffer data
when a file transfer is completed, so that any accumulated data in
the recieve buffer gets flushed out.
reference hls support fmp4 file from draft-pantos-http-live-streaming-20
the spec describes version 7 of hls protocol
Suggested-by: Ronak <ronak2121@yahoo.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
This refactors get_cookies to simplify some code paths, specifically for
skipping logic in the while loop or exiting it. It also simplifies the logic
for appending additional values to *cookies by replacing strlen/malloc/snprintf
with one call av_asnprintf.
This refactor fixes a bug where the cookie_params AVDictionary would get leaked
if we failed to allocate a new buffer for writing to *cookies.
- Parse schm atom to get different encryption schemes.
- Allow senc atom to appear in track fragments.
- Allow 16-byte IVs.
- Allow constant IVs (specified in tenc).
- Allow only tenc to specify encryption (i.e. no senc/saiz/saio).
- Use sample descriptor to detect clear fragments.
This doesn't support:
- Different sample descriptor holding different encryption info.
- Only first sample descriptor can be encrypted.
- Encrypted sample groups (i.e. seig).
- Non-'cenc' encryption scheme when using -decryption_key.
Signed-off-by: Jacob Trimble <modmaker@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes https://trac.ffmpeg.org/ticket/2798
This makes movenc handle AV_DISPOSITION_ATTACHED_PIC and write
the associated pictures in iTunes cover atom. This corresponds
to how 'mov' demuxer parses and exposes the cover images when
reading.
Most of the existing track handling loops properly ignore
these 'virtual streams' as MOVTrack->entry is never incremented
for them. However, additional tests are added as needed to ignore
them.
Tested to produce valid output with:
ffmpeg -i movie.mp4 -i thumb.jpg -disposition✌️1 attached_pic \
-map 0 -map 1 -c copy movie-with-cover.mp4
The cover image is also copied correctly with:
ffmpeg -i movie-with-cover.mp4 -map 0 -c copy out.mp4
AtomicParseley says that the attached_pic stream is properly
not visible in the main tracks of the file.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
The logic is applicable only when use_template is enabled and use_timeline
is disabled. The logic monitors the flow of segment indexes. If a streams's
segment index value is not at the expected real time position, then
the logic corrects that index value.
Typically this logic is needed in live streaming use cases. The network
bandwidth fluctuations are common during long run streaming. Each
fluctuation can cause the segment indexes fall behind the expected real
time position. Without this logic, players will not be able to consume
the content, even after encoder's network condition comes back to
normal state.
availability time of Nth segment = availabilityStartTime + (N*segment duration) - availabilityTimeOffset.
This field helps to reduce the latency by about a segment duration in streaming mode.
@availabilityStartTime specifies the anchor for the computation of the earliest
availability time (in UTC) for any Segment in the Media Presentation.
As per this requirement, the @AvailabilityStartTime should be set to the
wallclock time at which the first frame of the first segment begins encoding.
But, it was getting set only when the first segment was completely ready. Making
the required correction in this patch. This correction is mainly needed to reduce
the latency in live streaming use cases.
Calling 'write_manifest' from 'write_header' was causing creation of
first MPD with invalid values. Ex: zero @duration param value. Also,
the manifest files (MPD or M3U8s) should be created when at-least
one media frame is ready for consumption.
When use_template is enabled and use_timeline is disabled, typically
it is required to generate the segments at the configured segment duration
rate on an average. This commit is particularly needed to handle the
segmentation when video frame rates are fractional like 29.97 or 59.94 fps.
There are use cases where average segment duration needs to be configured
and muxer is expected to maintain the average segment duration. So, using
the name 'min_seg_duration' will be misleading. So, changing the parameter
name to 'seg_duration', where it can be minimum segment duration or average
segment duration based on the use-case. The additional updates needed for
this functinality are made the sub-sequent patches of this patch series.
The HLSContext struct contains fields which duplicate the data stored in the
avio_opts field. This change removes those fields in favor of avio_opts, and
updates the code accordingly.
The original patch caused the buffer pointed to by new_cookies in open_url to be
leaked. The only thing that buffer is used for is to store the value until it
can be passed to av_dict_set. To fix the leak, v2 of the patch simply calls
av_dict_set with the AV_DICT_DONT_STRDUP_VAL flag, so that the dictionary takes
ownership of the memory instead of copying it again.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Richard Shaffer <rshaffer@tunein.com>
The rw_timeout option is currently not applied when opening media playlist,
segment, or encryption key URLs. This can cause the HLS demuxer to block
indefinitely, even when the rw_timeout option has been specified. This change
simply enables carrying over the rw_timeout option when the demuxer opens these
URLs.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Richard Shaffer <rshaffer@tunein.com>
The rw_timeout option is currently not applied when opening media playlist,
segment, or encryption key URLs. This can cause the HLS demuxer to block
indefinitely, even when the rw_timeout option has been specified. This change
simply enables carrying over the rw_timeout option when the demuxer opens these
URLs.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Richard Shaffer <rshaffer@tunein.com>
This prevents creating potentially broken files, as both the AV1 and
the AV1 in ISOMBFF specs are unfinished.
Signed-off-by: James Almer <jamrial@gmail.com>
and refine the warning message when use both hls_key_info_file and hls_enc
Reviewed-by: Gyan Doshi <ffmpeg@gyani.pro>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
If the parser returns full frames, then the output pointer retured by
av_parser_parse2() is guaranteed to point to data contained in the
input packet's buffer.
Create a new reference to said buffer in that case, to avoid
unnecessary data copy when queueing the packet later in the function.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes: runtime error: signed integer overflow: 18133149658382192 - -9223090561878065151 cannot be represented in type 'long long'
Fixes: crbug 831552
Reported-by: Matt Wolenetz <wolenetz@google.com>
Reviewed-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: crbug 829153
Reported-by: Matt Wolenetz <wolenetz@google.com>
Reviewed-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In some cases, mainly working with multiprogram mpeg-ts containers as
input, it would be handy to select sub stream of a specific program by
their metadata.
This patch makes it possible to narrow the stream selection among
streams of the specified program by stream metadata.
Examples:
p:601:m:language:hun will select all sub streams of program with id 601
where sub streams have metadata key named 'language' with value 'hun'.
p:602:m:guide will select all sub streams of program with id 602 where
sub streams have metadata key named 'guide'.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When using hls_list_size with hls_flags delete_segments, currently
hls_list_size * 2 +- segments remain on disk. With this new option,
the amount of disk space used can be controlled by the user.
fix ticket: #7131
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Aman Gupta <aman@tmm1.net>
Fixes: crbug 822705
Reported-by: Matt Wolenetz <wolenetz@google.com>
Reviewed-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently when specifying the program id you can only decide to select
all stream of the specified program (e.g. p:103 will select all streams
of program 103) or narrow the selection to a specific stream sub index
(e.g. p:145:1 will select 2nd stream of program 145.) But you can not
specify like all audio streams of program 145 or 3rd video stream of
program 311.
In some case, mainly working with multiprogram mpeg-ts containers as
input, this feature would be handy.
This patch makes it possible to narrow the stream selection among
streams of the specified program by stream type and optionally its
index. Handled types: a, v, s, d.
Examples: p:601:a will select all audio streams of program 601,
p:603:a:1 will select 2nd audio streams of program 603,
p:604:v:0 will select first video stream of program 604.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Some ADTS streams can have multiple ID3 tags between frames. This
change parses all of them, rather than just the first one.
Signed-off-by: Mattias Amnefelt <mattiasa@avm.se>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
