Reduces buffering latency with low bitrate streams, where
8192 bytes can mean several seconds.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
ISO-10646 alone means UCS-4 for iconv, the specs refers to the Basic
Multilingual Plane (BMP), therefore we need UCS-2. VLC also using that.
Signed-off-by: Marton Balint <cus@passwd.hu>
This enables us to read the data coding type utilized for
a specific private data stream, of which we currently are
interested in ARIB caption streams.
The component tag limitations are according to ARIB TR-B14,
and the component IDs are defined in ARIB STD-B10.
Fixes issues when a subtitle packet is received before PCR for the
program has been received, leading to wildly jumping timestamps
on the lavf client side as well as in the re-ordering logic.
This usually happens in case of multiplexes where the PCR of a
program is not taken into account with subtitle tracks' DTS/PTS.
In 9152c1e495, the mpegts parser was taught how to parse
PMT sections which contained multiple tables. That commit
fixed parsing of PMT packets from some cable providers,
which included a special SCTE table (0xc0) before the
standard program map table (0x2).
Sometimes, however, the combined 0xc0 and 0x2 tables are
larger than a single TS packet (188 bytes). The mpegts parser
already attempts to parse sections which span multiple packets,
but still assumed that the split section only contained one
table.
This patch fixes parsing of such a sample[1].
Before:
Input #0, mpegts, from 'combined-pmt-tids-split.ts':
Duration: 00:00:01.26, start: 39188.931756, bitrate: 597 kb/s
Program 1
No Program
Stream #0:0[0xeff]: Audio: ac3, 48000 Hz, mono, fltp, 64 kb/s
Stream #0:1[0xefd]: Audio: mp3, 0 channels, fltp
Stream #0:2[0xefe]: Unknown: none
After:
Input #0, mpegts, from 'combined-pmt-tids-split.ts':
Duration: 00:00:01.27, start: 39188.931756, bitrate: 589 kb/s
Program 1
Stream #0:0[0xefd]: Video: h264 ([27][0][0][0] / 0x001B), none, 59.94 fps, 59.94 tbr, 90k tbn, 180k tbc
Stream #0:1[0xefe](eng): Audio: ac3 ([129][0][0][0] / 0x0081), 48000 Hz, stereo, fltp, 384 kb/s
Stream #0:2[0xeff](spa): Audio: ac3 ([129][0][0][0] / 0x0081), 48000 Hz, mono, fltp, 64 kb/s
Stream #0:3[0xf00]: Data: scte_35
Stream #0:4[0xf01]: Unknown: none (ETV1 / 0x31565445)
Stream #0:5[0xf02]: Unknown: none (ETV1 / 0x31565445)
Stream #0:6[0xf03]: Unknown: none ([192][0][0][0] / 0x00C0)
With the patch, the PMT is parsed correctly so the streams are
created in the correct order, are associated with "Program 1",
and their codecs are set correctly.
[1] https://s3.amazonaws.com/tmm1/combined-pmt-tids-split.ts
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Both stream_id and stream_identifier are used in this file,
and have different meanings. The latter comes from the
stream_identifier_descriptor.
Signed-off-by: Aman Gupta <aman@tmm1.net>
This new optional flag makes it easier to deal with mpegts
samples where the PMT is updated and elementary streams move
to different PIDs in the middle of playback.
Previously, new AVStreams were created per PID, and it was up
to the user to figure out which streams had migrated to a new PID
(by iterating over the list of AVProgram and making guesses), and
switch seamlessly to the new AVStream during playback.
Transcoding or remuxing these streams with ffmpeg on the CLI was
also quite painful, and the user would need to extract each set
of PIDs into a separate file and then stitch them back together.
With this new option, the mpegts demuxer will automatically detect
PMT changes and feed data from the new PID to the original AVStream
that was created for the orignal PID. For mpegts samples with
stream_identifier_descriptor available, the unique ID is used to
merge PIDs together. If the stream id is not available, the demuxer
attempts to map PIDs based on their position within the PMT.
With this change, I am able to playback and transcode/remux these
two samples which previously caused issues:
https://tmm1.s3.amazonaws.com/pmt-version-change.tshttps://kuroko.fushizen.eu/videos/pid_switch_sample.ts
I also have another longer sample in which the PMT changes
repeatedly and ES streams move to different pids three times
during playback:
https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts
Demuxing this sample with the new option shows several new log
messages as the PMT changes are handled:
[mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7)
[mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7
[mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8
[mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9
[mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98)
[mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b)
[mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b
[mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c
[mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d
[mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9)
[mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9
[mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa
[mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab
[mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7)
Signed-off-by: Aman Gupta <aman@tmm1.net>
With these fields, the user has enough information to
detect PMT changes and switch to new streams when the PMT
is updated with new ES pids.
To do so, the user would monitor the AVProgram they're interested
in for changes to pmt_version. If the version changes, they would
iterate over the program's streams to find new streams added with
the updated version number.
If new versions of streams are found, then the user would first try
to replace existing streams where stream_identifier matched.
If stream_identifier is not available, then the user would compare
pmt_stream_idx instead to replace the stream that was previously
at the same position within the PMT.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Some filtered mpegts streams may erroneously include PMTs for
programs that are not advertised in the PAT. This confuses ffmpeg
and most players because multiple audio/video streams are created
and it is unclear which ones actually contain data.
See for example https://tmm1.s3.amazonaws.com/unknown-pmts.ts
In this sample, the PAT advertises exactly one program. But the
pid it points to for the program's PMT contains PMTs for other
programs as well. This is because the broadcaster decided to
re-use the same pid for multiple program PMTs.
The hardware that filtered the original multi-program stream
into a single-program stream did so by rewriting the PAT to
contain only the program that was requested. But since it just
passed through the PMT pid referenced in the PAT, multiple PMTs
are still present for the other programs.
Before:
Input #0, mpegts, from 'unknown-pmts.ts':
Duration: 00:00:10.11, start: 80741.189700, bitrate: 9655 kb/s
Program 4
Stream #0:2[0x41]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt709, progressive), 1280x720 [SAR 1:1 DAR 16:9], Closed Captions, 11063 kb/s, 59.94 fps, 59.94 tbr, 90k tbn, 119.88 tbc
Stream #0:3[0x44](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s
Stream #0:4[0x45](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, stereo, fltp, 128 kb/s
No Program
Stream #0:0[0x31]: Video: mpeg2video ([2][0][0][0] / 0x0002), none(tv), 90k tbr, 90k tbn, 90k tbc
Stream #0:1[0x34](eng): Audio: ac3 (AC-3 / 0x332D4341), 0 channels, fltp
Stream #0:5[0x51]: Video: mpeg2video ([2][0][0][0] / 0x0002), none, 90k tbr, 90k tbn
Stream #0:6[0x54](eng): Audio: ac3 (AC-3 / 0x332D4341), 0 channels
With skip_unknown_pmt=1:
Input #0, mpegts, from 'unknown-pmts.ts':
Duration: 00:00:10.11, start: 80741.189700, bitrate: 9655 kb/s
Program 4
Stream #0:0[0x41]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p(tv, bt709, progressive), 1280x720 [SAR 1:1 DAR 16:9], Closed Captions, 11063 kb/s, 59.94 fps, 59.94 tbr, 90k tbn, 119.88 tbc
Stream #0:1[0x44](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s
Stream #0:2[0x45](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, stereo, fltp, 128 kb/s
Signed-off-by: Aman Gupta <aman@tmm1.net>
Parses the video_stream_descriptor (H.222 2.6.2) to look
for the still_picture_flag. This is exposed to the user
via a new AV_DISPOSITION_STILL_IMAGE.
See for example https://tmm1.s3.amazonaws.com/music-choice.ts,
whose video stream only updates every ~6 seconds.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes PMT parsing in some mpegts streams which contain
multiple tables within the PMT pid. Previously, the parser
assumed only one table was present in each packet, and discarded
the rest of the section data after attempting to parse the first
table.
A similar issue was documented in the BeyondTV software[1], which
helped me diagnose the same bug in the ffmpeg mpegts demuxer. I also
tried DVBInspector, libdvbpsi's dvbinfo, and tstools' tsinfo to
help debug. The former two properly read PMTs with multiple tables,
whereas the last has the same bug as ffmpeg.
I've created a minimal sample[2] which contains the combined PMT.
Here's what ffmpeg probe shows before and after this patch:
Before:
Input #0, mpegts, from 'combined-pmt-tids.ts':
Duration: 00:00:01.08, start: 4932.966167, bitrate: 741 kb/s
Program 1
No Program
Stream #0:0[0xf9d]: Audio: ac3, 48000 Hz, mono, fltp, 96 kb/s
Stream #0:1[0xf9b]: Audio: mp3, 0 channels, fltp
Stream #0:2[0xf9c]: Unknown: none
After:
Input #0, mpegts, from 'combined-pmt-tids.ts':
Duration: 00:00:01.11, start: 4932.966167, bitrate: 718 kb/s
Program 1
Stream #0:0[0xf9b]: Video: mpeg2video ([2][0][0][0] / 0x0002), none(tv, top first), 29.97 fps, 29.97 tbr, 90k tbn, 90k tbc
Stream #0:1[0xf9c](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s
Stream #0:2[0xf9d](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, mono, fltp, 96 kb/s
With the patch, the PMT is parsed correctly so the streams are
created in the correct order, are associated with "Program 1",
and their codecs are set correctly.
[1] http://forums.snapstream.com/vb/showpost.php?p=343816&postcount=201
[2] https://s3.amazonaws.com/tmm1/combined-pmt-tids.ts
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This mimics the logic flow in all the other callbacks
(pat_cb, sdt_cb, m4sl_cb), and avoids calling skip_identical()
for non PMT_TID packets.
Since skip_identical modifies internal state like
MpegTSSectionFilter.last_ver, this change prevents unnecessary
reprocessing on some streams which contain multiple tables in
the PMT pid. This can be observed with streams from certain US
cable providers, which include both tid=0x2 and another unspecified
tid=0xc0.
Signed-off-by: Aman Gupta <aman@tmm1.net>
1. an audio component with an ISO_639_language_descriptor in the PMT with the
audio_type field set to 0x03
2. a supplementary_audio_descriptor with the editorial_classification field set
to 0x01
3. an ac-3_descriptor or an enhanced_ac-3_descriptor with a component_type field
with the service_type flags set to Visually Impaired
Tested-by: Łukasz Krzciuk <lkrzciuk@vewd.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The supplementary audio descriptor is defined in ETSI EN 300 468 and
provides more details regarding accessibility audio tracks, especially
the normative annex J contains a detailed description of its use.
Its language code (if present) overrides the language code of an also
present ISO 639 language descriptor.
Note that this also changes the priority of multiple descriptors with
language from "the last descriptor with language within the ES loop" to
"specific descriptor over general ISO 639 descriptor".
Signed-off-by: Aman Gupta <aman@tmm1.net>
It is negative, so can't be used for left shifting.
This fixes ubsan runtime error: shift exponent -1 is negative
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
It is supposed to be a flag. The only currently defined value is
AVIO_SEEKABLE_NORMAL, but other ones may be added in the future.
However all the current lavf code treats this field as a bool (mainly
for historical reasons).
Change all those cases to properly check for AVIO_SEEKABLE_NORMAL.
this removes the need to probe to discover aac streams
inside mpegts containers, thus speeding up initial playback.
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '74d98d1b0e0e7af444c933ea3c472494de3ce6f2':
mpegts: Validate the SL Packet Header Configuration
See e630ca5111
Our local timestamp_len > 64 is adjusted to > 63 to match the Libav
check and the actual specifications (14496-1, 10.2.2).
There is no need to request a sample as it violates the specifications
and such a file would likely be the result of a crafted/fuzzed sample.
On the other hand, the clipping of the value is kept for extra safety.
Merged-by: Clément Bœsch <clement@stupeflix.com>
