mirror of
https://github.com/FFmpeg/FFmpeg.git
synced 2024-12-23 12:43:46 +02:00
61930bd0d7
* qatar/master: (27 commits) libxvid: Give more suitable names to libxvid-related files. libxvid: Separate libxvid encoder from libxvid rate control code. jpeglsdec: Remove write-only variable in ff_jpegls_decode_lse(). fate: cosmetics: lowercase some comments fate: Give more consistent names to some RealVideo/RealAudio tests. lavfi: add avfilter_get_audio_buffer_ref_from_arrays(). lavfi: add extended_data to AVFilterBuffer. lavc: check that extended_data is properly set in avcodec_encode_audio2(). lavc: pad last audio frame with silence when needed. samplefmt: add a function for filling a buffer with silence. samplefmt: add a function for copying audio samples. lavr: do not try to copy to uninitialized output audio data. lavr: make avresample_read() with NULL output discard samples. fate: split idroq audio and video into separate tests fate: improve dependencies fate: add convenient shorthands for ea-vp6, libavcodec, libavutil tests fate: split some combined tests into separate audio and video tests fate: fix dependencies for probe tests mips: intreadwrite: fix inline asm for gcc 4.8 mips: intreadwrite: remove unnecessary inline asm ... Conflicts: cmdutils.h configure doc/APIchanges doc/filters.texi ffmpeg.c ffplay.c libavcodec/internal.h libavcodec/jpeglsdec.c libavcodec/libschroedingerdec.c libavcodec/libxvid.c libavcodec/libxvid_rc.c libavcodec/utils.c libavcodec/version.h libavfilter/avfilter.c libavfilter/avfilter.h libavfilter/buffersink.h tests/Makefile tests/fate/aac.mak tests/fate/audio.mak tests/fate/demux.mak tests/fate/ea.mak tests/fate/image.mak tests/fate/libavutil.mak tests/fate/lossless-audio.mak tests/fate/lossless-video.mak tests/fate/microsoft.mak tests/fate/qt.mak tests/fate/real.mak tests/fate/screen.mak tests/fate/video.mak tests/fate/voice.mak tests/fate/vqf.mak tests/ref/fate/ea-mad tests/ref/fate/ea-tqi Merged-by: Michael Niedermayer <michaelni@gmx.at>
1196 lines
42 KiB
Plaintext
1196 lines
42 KiB
Plaintext
\input texinfo @c -*- texinfo -*-
|
|
|
|
@settitle ffmpeg Documentation
|
|
@titlepage
|
|
@center @titlefont{ffmpeg Documentation}
|
|
@end titlepage
|
|
|
|
@top
|
|
|
|
@contents
|
|
|
|
@chapter Synopsis
|
|
|
|
The generic syntax is:
|
|
|
|
@example
|
|
@c man begin SYNOPSIS
|
|
ffmpeg [global options] [[infile options][@option{-i} @var{infile}]]... @{[outfile options] @var{outfile}@}...
|
|
@c man end
|
|
@end example
|
|
|
|
@chapter Description
|
|
@c man begin DESCRIPTION
|
|
|
|
ffmpeg is a very fast video and audio converter that can also grab from
|
|
a live audio/video source. It can also convert between arbitrary sample
|
|
rates and resize video on the fly with a high quality polyphase filter.
|
|
|
|
ffmpeg reads from an arbitrary number of input "files" (which can be regular
|
|
files, pipes, network streams, grabbing devices, etc.), specified by the
|
|
@code{-i} option, and writes to an arbitrary number of output "files", which are
|
|
specified by a plain output filename. Anything found on the command line which
|
|
cannot be interpreted as an option is considered to be an output filename.
|
|
|
|
Each input or output file can in principle contain any number of streams of
|
|
different types (video/audio/subtitle/attachment/data). Allowed number and/or
|
|
types of streams can be limited by the container format. Selecting, which
|
|
streams from which inputs go into output, is done either automatically or with
|
|
the @code{-map} option (see the Stream selection chapter).
|
|
|
|
To refer to input files in options, you must use their indices (0-based). E.g.
|
|
the first input file is @code{0}, the second is @code{1} etc. Similarly, streams
|
|
within a file are referred to by their indices. E.g. @code{2:3} refers to the
|
|
fourth stream in the third input file. See also the Stream specifiers chapter.
|
|
|
|
As a general rule, options are applied to the next specified
|
|
file. Therefore, order is important, and you can have the same
|
|
option on the command line multiple times. Each occurrence is
|
|
then applied to the next input or output file.
|
|
Exceptions from this rule are the global options (e.g. verbosity level),
|
|
which should be specified first.
|
|
|
|
Do not mix input and output files -- first specify all input files, then all
|
|
output files. Also do not mix options which belong to different files. All
|
|
options apply ONLY to the next input or output file and are reset between files.
|
|
|
|
@itemize
|
|
@item
|
|
To set the video bitrate of the output file to 64kbit/s:
|
|
@example
|
|
ffmpeg -i input.avi -b:v 64k output.avi
|
|
@end example
|
|
|
|
@item
|
|
To force the frame rate of the output file to 24 fps:
|
|
@example
|
|
ffmpeg -i input.avi -r 24 output.avi
|
|
@end example
|
|
|
|
@item
|
|
To force the frame rate of the input file (valid for raw formats only)
|
|
to 1 fps and the frame rate of the output file to 24 fps:
|
|
@example
|
|
ffmpeg -r 1 -i input.m2v -r 24 output.avi
|
|
@end example
|
|
@end itemize
|
|
|
|
The format option may be needed for raw input files.
|
|
|
|
@c man end DESCRIPTION
|
|
|
|
@chapter Stream selection
|
|
@c man begin STREAM SELECTION
|
|
|
|
By default ffmpeg includes only one stream of each type (video, audio, subtitle)
|
|
present in the input files and adds them to each output file. It picks the
|
|
"best" of each based upon the following criteria; for video it is the stream
|
|
with the highest resolution, for audio the stream with the most channels, for
|
|
subtitle it's the first subtitle stream. In the case where several streams of
|
|
the same type rate equally, the lowest numbered stream is chosen.
|
|
|
|
You can disable some of those defaults by using @code{-vn/-an/-sn} options. For
|
|
full manual control, use the @code{-map} option, which disables the defaults just
|
|
described.
|
|
|
|
@c man end STREAM SELECTION
|
|
|
|
@chapter Options
|
|
@c man begin OPTIONS
|
|
|
|
@include avtools-common-opts.texi
|
|
|
|
@section Main options
|
|
|
|
@table @option
|
|
|
|
@item -f @var{fmt} (@emph{input/output})
|
|
Force input or output file format. The format is normally auto detected for input
|
|
files and guessed from file extension for output files, so this option is not
|
|
needed in most cases.
|
|
|
|
@item -i @var{filename} (@emph{input})
|
|
input file name
|
|
|
|
@item -y (@emph{global})
|
|
Overwrite output files without asking.
|
|
|
|
@item -n (@emph{global})
|
|
Do not overwrite output files but exit if file exists.
|
|
|
|
@item -c[:@var{stream_specifier}] @var{codec} (@emph{input/output,per-stream})
|
|
@itemx -codec[:@var{stream_specifier}] @var{codec} (@emph{input/output,per-stream})
|
|
Select an encoder (when used before an output file) or a decoder (when used
|
|
before an input file) for one or more streams. @var{codec} is the name of a
|
|
decoder/encoder or a special value @code{copy} (output only) to indicate that
|
|
the stream is not to be re-encoded.
|
|
|
|
For example
|
|
@example
|
|
ffmpeg -i INPUT -map 0 -c:v libx264 -c:a copy OUTPUT
|
|
@end example
|
|
encodes all video streams with libx264 and copies all audio streams.
|
|
|
|
For each stream, the last matching @code{c} option is applied, so
|
|
@example
|
|
ffmpeg -i INPUT -map 0 -c copy -c:v:1 libx264 -c:a:137 libvorbis OUTPUT
|
|
@end example
|
|
will copy all the streams except the second video, which will be encoded with
|
|
libx264, and the 138th audio, which will be encoded with libvorbis.
|
|
|
|
@item -t @var{duration} (@emph{output})
|
|
Stop writing the output after its duration reaches @var{duration}.
|
|
@var{duration} may be a number in seconds, or in @code{hh:mm:ss[.xxx]} form.
|
|
|
|
@item -fs @var{limit_size} (@emph{output})
|
|
Set the file size limit, expressed in bytes.
|
|
|
|
@item -ss @var{position} (@emph{input/output})
|
|
When used as an input option (before @code{-i}), seeks in this input file to
|
|
@var{position}. When used as an output option (before an output filename),
|
|
decodes but discards input until the timestamps reach @var{position}. This is
|
|
slower, but more accurate.
|
|
|
|
@var{position} may be either in seconds or in @code{hh:mm:ss[.xxx]} form.
|
|
|
|
@item -itsoffset @var{offset} (@emph{input})
|
|
Set the input time offset in seconds.
|
|
@code{[-]hh:mm:ss[.xxx]} syntax is also supported.
|
|
The offset is added to the timestamps of the input files.
|
|
Specifying a positive offset means that the corresponding
|
|
streams are delayed by @var{offset} seconds.
|
|
|
|
@item -timestamp @var{time} (@emph{output})
|
|
Set the recording timestamp in the container.
|
|
The syntax for @var{time} is:
|
|
@example
|
|
now|([(YYYY-MM-DD|YYYYMMDD)[T|t| ]]((HH:MM:SS[.m...])|(HHMMSS[.m...]))[Z|z])
|
|
@end example
|
|
If the value is "now" it takes the current time.
|
|
Time is local time unless 'Z' or 'z' is appended, in which case it is
|
|
interpreted as UTC.
|
|
If the year-month-day part is not specified it takes the current
|
|
year-month-day.
|
|
|
|
@item -metadata[:metadata_specifier] @var{key}=@var{value} (@emph{output,per-metadata})
|
|
Set a metadata key/value pair.
|
|
|
|
An optional @var{metadata_specifier} may be given to set metadata
|
|
on streams or chapters. See @code{-map_metadata} documentation for
|
|
details.
|
|
|
|
This option overrides metadata set with @code{-map_metadata}. It is
|
|
also possible to delete metadata by using an empty value.
|
|
|
|
For example, for setting the title in the output file:
|
|
@example
|
|
ffmpeg -i in.avi -metadata title="my title" out.flv
|
|
@end example
|
|
|
|
To set the language of the first audio stream:
|
|
@example
|
|
ffmpeg -i INPUT -metadata:s:a:1 language=eng OUTPUT
|
|
@end example
|
|
|
|
@item -target @var{type} (@emph{output})
|
|
Specify target file type (@code{vcd}, @code{svcd}, @code{dvd}, @code{dv},
|
|
@code{dv50}). @var{type} may be prefixed with @code{pal-}, @code{ntsc-} or
|
|
@code{film-} to use the corresponding standard. All the format options
|
|
(bitrate, codecs, buffer sizes) are then set automatically. You can just type:
|
|
|
|
@example
|
|
ffmpeg -i myfile.avi -target vcd /tmp/vcd.mpg
|
|
@end example
|
|
|
|
Nevertheless you can specify additional options as long as you know
|
|
they do not conflict with the standard, as in:
|
|
|
|
@example
|
|
ffmpeg -i myfile.avi -target vcd -bf 2 /tmp/vcd.mpg
|
|
@end example
|
|
|
|
@item -dframes @var{number} (@emph{output})
|
|
Set the number of data frames to record. This is an alias for @code{-frames:d}.
|
|
|
|
@item -frames[:@var{stream_specifier}] @var{framecount} (@emph{output,per-stream})
|
|
Stop writing to the stream after @var{framecount} frames.
|
|
|
|
@item -q[:@var{stream_specifier}] @var{q} (@emph{output,per-stream})
|
|
@itemx -qscale[:@var{stream_specifier}] @var{q} (@emph{output,per-stream})
|
|
Use fixed quality scale (VBR). The meaning of @var{q} is
|
|
codec-dependent.
|
|
|
|
@item -filter[:@var{stream_specifier}] @var{filter_graph} (@emph{output,per-stream})
|
|
@var{filter_graph} is a description of the filter graph to apply to
|
|
the stream. Use @code{-filters} to show all the available filters
|
|
(including also sources and sinks).
|
|
|
|
See also the @option{-filter_complex} option if you want to create filter graphs
|
|
with multiple inputs and/or outputs.
|
|
@item -pre[:@var{stream_specifier}] @var{preset_name} (@emph{output,per-stream})
|
|
Specify the preset for matching stream(s).
|
|
|
|
@item -stats (@emph{global})
|
|
Print encoding progress/statistics. On by default.
|
|
|
|
@item -debug_ts (@emph{global})
|
|
Print timestamp information. It is off by default. This option is
|
|
mostly useful for testing and debugging purposes, and the output
|
|
format may change from one version to another, so it should not be
|
|
employed by portable scripts.
|
|
|
|
See also the option @code{-fdebug ts}.
|
|
|
|
@item -attach @var{filename} (@emph{output})
|
|
Add an attachment to the output file. This is supported by a few formats
|
|
like Matroska for e.g. fonts used in rendering subtitles. Attachments
|
|
are implemented as a specific type of stream, so this option will add
|
|
a new stream to the file. It is then possible to use per-stream options
|
|
on this stream in the usual way. Attachment streams created with this
|
|
option will be created after all the other streams (i.e. those created
|
|
with @code{-map} or automatic mappings).
|
|
|
|
Note that for Matroska you also have to set the mimetype metadata tag:
|
|
@example
|
|
ffmpeg -i INPUT -attach DejaVuSans.ttf -metadata:s:2 mimetype=application/x-truetype-font out.mkv
|
|
@end example
|
|
(assuming that the attachment stream will be third in the output file).
|
|
|
|
@item -dump_attachment[:@var{stream_specifier}] @var{filename} (@emph{input,per-stream})
|
|
Extract the matching attachment stream into a file named @var{filename}. If
|
|
@var{filename} is empty, then the value of the @code{filename} metadata tag
|
|
will be used.
|
|
|
|
E.g. to extract the first attachment to a file named 'out.ttf':
|
|
@example
|
|
ffmpeg -dump_attachment:t:0 out.ttf INPUT
|
|
@end example
|
|
To extract all attachments to files determined by the @code{filename} tag:
|
|
@example
|
|
ffmpeg -dump_attachment:t "" INPUT
|
|
@end example
|
|
|
|
Technical note -- attachments are implemented as codec extradata, so this
|
|
option can actually be used to extract extradata from any stream, not just
|
|
attachments.
|
|
|
|
@end table
|
|
|
|
@section Video Options
|
|
|
|
@table @option
|
|
@item -vframes @var{number} (@emph{output})
|
|
Set the number of video frames to record. This is an alias for @code{-frames:v}.
|
|
@item -r[:@var{stream_specifier}] @var{fps} (@emph{input/output,per-stream})
|
|
Set frame rate (Hz value, fraction or abbreviation), (default = 25). For output
|
|
streams implies @code{-vsync cfr}.
|
|
@item -s[:@var{stream_specifier}] @var{size} (@emph{input/output,per-stream})
|
|
Set frame size. The format is @samp{wxh} (default - same as source).
|
|
The following abbreviations are recognized:
|
|
@table @samp
|
|
@item sqcif
|
|
128x96
|
|
@item qcif
|
|
176x144
|
|
@item cif
|
|
352x288
|
|
@item 4cif
|
|
704x576
|
|
@item 16cif
|
|
1408x1152
|
|
@item qqvga
|
|
160x120
|
|
@item qvga
|
|
320x240
|
|
@item vga
|
|
640x480
|
|
@item svga
|
|
800x600
|
|
@item xga
|
|
1024x768
|
|
@item uxga
|
|
1600x1200
|
|
@item qxga
|
|
2048x1536
|
|
@item sxga
|
|
1280x1024
|
|
@item qsxga
|
|
2560x2048
|
|
@item hsxga
|
|
5120x4096
|
|
@item wvga
|
|
852x480
|
|
@item wxga
|
|
1366x768
|
|
@item wsxga
|
|
1600x1024
|
|
@item wuxga
|
|
1920x1200
|
|
@item woxga
|
|
2560x1600
|
|
@item wqsxga
|
|
3200x2048
|
|
@item wquxga
|
|
3840x2400
|
|
@item whsxga
|
|
6400x4096
|
|
@item whuxga
|
|
7680x4800
|
|
@item cga
|
|
320x200
|
|
@item ega
|
|
640x350
|
|
@item hd480
|
|
852x480
|
|
@item hd720
|
|
1280x720
|
|
@item hd1080
|
|
1920x1080
|
|
@end table
|
|
|
|
@item -aspect[:@var{stream_specifier}] @var{aspect} (@emph{output,per-stream})
|
|
Set the video display aspect ratio specified by @var{aspect}.
|
|
|
|
@var{aspect} can be a floating point number string, or a string of the
|
|
form @var{num}:@var{den}, where @var{num} and @var{den} are the
|
|
numerator and denominator of the aspect ratio. For example "4:3",
|
|
"16:9", "1.3333", and "1.7777" are valid argument values.
|
|
|
|
@item -croptop @var{size}
|
|
@item -cropbottom @var{size}
|
|
@item -cropleft @var{size}
|
|
@item -cropright @var{size}
|
|
All the crop options have been removed. Use -vf
|
|
crop=width:height:x:y instead.
|
|
|
|
@item -padtop @var{size}
|
|
@item -padbottom @var{size}
|
|
@item -padleft @var{size}
|
|
@item -padright @var{size}
|
|
@item -padcolor @var{hex_color}
|
|
All the pad options have been removed. Use -vf
|
|
pad=width:height:x:y:color instead.
|
|
|
|
@item -vn (@emph{output})
|
|
Disable video recording.
|
|
|
|
@item -vcodec @var{codec} (@emph{output})
|
|
Set the video codec. This is an alias for @code{-codec:v}.
|
|
@item -same_quant
|
|
Use same quantizer as source (implies VBR).
|
|
|
|
Note that this is NOT SAME QUALITY. Do not use this option unless you know you
|
|
need it.
|
|
|
|
@item -pass @var{n}
|
|
Select the pass number (1 or 2). It is used to do two-pass
|
|
video encoding. The statistics of the video are recorded in the first
|
|
pass into a log file (see also the option -passlogfile),
|
|
and in the second pass that log file is used to generate the video
|
|
at the exact requested bitrate.
|
|
On pass 1, you may just deactivate audio and set output to null,
|
|
examples for Windows and Unix:
|
|
@example
|
|
ffmpeg -i foo.mov -c:v libxvid -pass 1 -an -f rawvideo -y NUL
|
|
ffmpeg -i foo.mov -c:v libxvid -pass 1 -an -f rawvideo -y /dev/null
|
|
@end example
|
|
|
|
@item -passlogfile @var{prefix} (@emph{global})
|
|
Set two-pass log file name prefix to @var{prefix}, the default file name
|
|
prefix is ``ffmpeg2pass''. The complete file name will be
|
|
@file{PREFIX-N.log}, where N is a number specific to the output
|
|
stream
|
|
|
|
@item -vlang @var{code}
|
|
Set the ISO 639 language code (3 letters) of the current video stream.
|
|
|
|
@item -vf @var{filter_graph} (@emph{output})
|
|
@var{filter_graph} is a description of the filter graph to apply to
|
|
the input video.
|
|
Use the option "-filters" to show all the available filters (including
|
|
also sources and sinks). This is an alias for @code{-filter:v}.
|
|
|
|
@end table
|
|
|
|
@section Advanced Video Options
|
|
|
|
@table @option
|
|
@item -pix_fmt[:@var{stream_specifier}] @var{format} (@emph{input/output,per-stream})
|
|
Set pixel format. Use @code{-pix_fmts} to show all the supported
|
|
pixel formats.
|
|
@item -sws_flags @var{flags} (@emph{input/output})
|
|
Set SwScaler flags.
|
|
@item -vdt @var{n}
|
|
Discard threshold.
|
|
|
|
@item -rc_override[:@var{stream_specifier}] @var{override} (@emph{output,per-stream})
|
|
Rate control override for specific intervals, formatted as "int,int,int"
|
|
list separated with slashes. Two first values are the beginning and
|
|
end frame numbers, last one is quantizer to use if positive, or quality
|
|
factor if negative.
|
|
|
|
@item -deinterlace
|
|
Deinterlace pictures.
|
|
This option is deprecated since the deinterlacing is very low quality.
|
|
Use the yadif filter with @code{-filter:v yadif}.
|
|
@item -ilme
|
|
Force interlacing support in encoder (MPEG-2 and MPEG-4 only).
|
|
Use this option if your input file is interlaced and you want
|
|
to keep the interlaced format for minimum losses.
|
|
The alternative is to deinterlace the input stream with
|
|
@option{-deinterlace}, but deinterlacing introduces losses.
|
|
@item -psnr
|
|
Calculate PSNR of compressed frames.
|
|
@item -vstats
|
|
Dump video coding statistics to @file{vstats_HHMMSS.log}.
|
|
@item -vstats_file @var{file}
|
|
Dump video coding statistics to @var{file}.
|
|
@item -top[:@var{stream_specifier}] @var{n} (@emph{output,per-stream})
|
|
top=1/bottom=0/auto=-1 field first
|
|
@item -dc @var{precision}
|
|
Intra_dc_precision.
|
|
@item -vtag @var{fourcc/tag} (@emph{output})
|
|
Force video tag/fourcc. This is an alias for @code{-tag:v}.
|
|
@item -qphist (@emph{global})
|
|
Show QP histogram
|
|
@item -vbsf @var{bitstream_filter}
|
|
Deprecated see -bsf
|
|
@item -force_key_frames[:@var{stream_specifier}] @var{time}[,@var{time}...] (@emph{output,per-stream})
|
|
Force key frames at the specified timestamps, more precisely at the first
|
|
frames after each specified time.
|
|
This option can be useful to ensure that a seek point is present at a
|
|
chapter mark or any other designated place in the output file.
|
|
The timestamps must be specified in ascending order.
|
|
|
|
@item -copyinkf[:@var{stream_specifier}] (@emph{output,per-stream})
|
|
When doing stream copy, copy also non-key frames found at the
|
|
beginning.
|
|
@end table
|
|
|
|
@section Audio Options
|
|
|
|
@table @option
|
|
@item -aframes @var{number} (@emph{output})
|
|
Set the number of audio frames to record. This is an alias for @code{-frames:a}.
|
|
@item -ar[:@var{stream_specifier}] @var{freq} (@emph{input/output,per-stream})
|
|
Set the audio sampling frequency. For output streams it is set by
|
|
default to the frequency of the corresponding input stream. For input
|
|
streams this option only makes sense for audio grabbing devices and raw
|
|
demuxers and is mapped to the corresponding demuxer options.
|
|
@item -aq @var{q} (@emph{output})
|
|
Set the audio quality (codec-specific, VBR). This is an alias for -q:a.
|
|
@item -ac[:@var{stream_specifier}] @var{channels} (@emph{input/output,per-stream})
|
|
Set the number of audio channels. For output streams it is set by
|
|
default to the number of input audio channels. For input streams
|
|
this option only makes sense for audio grabbing devices and raw demuxers
|
|
and is mapped to the corresponding demuxer options.
|
|
@item -an (@emph{output})
|
|
Disable audio recording.
|
|
@item -acodec @var{codec} (@emph{input/output})
|
|
Set the audio codec. This is an alias for @code{-codec:a}.
|
|
@item -sample_fmt[:@var{stream_specifier}] @var{sample_fmt} (@emph{output,per-stream})
|
|
Set the audio sample format. Use @code{-sample_fmts} to get a list
|
|
of supported sample formats.
|
|
@end table
|
|
|
|
@section Advanced Audio options:
|
|
|
|
@table @option
|
|
@item -atag @var{fourcc/tag} (@emph{output})
|
|
Force audio tag/fourcc. This is an alias for @code{-tag:a}.
|
|
@item -absf @var{bitstream_filter}
|
|
Deprecated, see -bsf
|
|
@end table
|
|
|
|
@section Subtitle options:
|
|
|
|
@table @option
|
|
@item -slang @var{code}
|
|
Set the ISO 639 language code (3 letters) of the current subtitle stream.
|
|
@item -scodec @var{codec} (@emph{input/output})
|
|
Set the subtitle codec. This is an alias for @code{-codec:s}.
|
|
@item -sn (@emph{output})
|
|
Disable subtitle recording.
|
|
@item -sbsf @var{bitstream_filter}
|
|
Deprecated, see -bsf
|
|
@end table
|
|
|
|
@section Audio/Video grab options
|
|
|
|
@table @option
|
|
@item -isync (@emph{global})
|
|
Synchronize read on input.
|
|
@end table
|
|
|
|
@section Advanced options
|
|
|
|
@table @option
|
|
@item -map [-]@var{input_file_id}[:@var{stream_specifier}][,@var{sync_file_id}[:@var{stream_specifier}]] | @var{[linklabel]} (@emph{output})
|
|
|
|
Designate one or more input streams as a source for the output file. Each input
|
|
stream is identified by the input file index @var{input_file_id} and
|
|
the input stream index @var{input_stream_id} within the input
|
|
file. Both indices start at 0. If specified,
|
|
@var{sync_file_id}:@var{stream_specifier} sets which input stream
|
|
is used as a presentation sync reference.
|
|
|
|
The first @code{-map} option on the command line specifies the
|
|
source for output stream 0, the second @code{-map} option specifies
|
|
the source for output stream 1, etc.
|
|
|
|
A @code{-} character before the stream identifier creates a "negative" mapping.
|
|
It disables matching streams from already created mappings.
|
|
|
|
An alternative @var{[linklabel]} form will map outputs from complex filter
|
|
graphs (see the @option{-filter_complex} option) to the output file.
|
|
@var{linklabel} must correspond to a defined output link label in the graph.
|
|
|
|
For example, to map ALL streams from the first input file to output
|
|
@example
|
|
ffmpeg -i INPUT -map 0 output
|
|
@end example
|
|
|
|
For example, if you have two audio streams in the first input file,
|
|
these streams are identified by "0:0" and "0:1". You can use
|
|
@code{-map} to select which streams to place in an output file. For
|
|
example:
|
|
@example
|
|
ffmpeg -i INPUT -map 0:1 out.wav
|
|
@end example
|
|
will map the input stream in @file{INPUT} identified by "0:1" to
|
|
the (single) output stream in @file{out.wav}.
|
|
|
|
For example, to select the stream with index 2 from input file
|
|
@file{a.mov} (specified by the identifier "0:2"), and stream with
|
|
index 6 from input @file{b.mov} (specified by the identifier "1:6"),
|
|
and copy them to the output file @file{out.mov}:
|
|
@example
|
|
ffmpeg -i a.mov -i b.mov -c copy -map 0:2 -map 1:6 out.mov
|
|
@end example
|
|
|
|
To select all video and the third audio stream from an input file:
|
|
@example
|
|
ffmpeg -i INPUT -map 0:v -map 0:a:2 OUTPUT
|
|
@end example
|
|
|
|
To map all the streams except the second audio, use negative mappings
|
|
@example
|
|
ffmpeg -i INPUT -map 0 -map -0:a:1 OUTPUT
|
|
@end example
|
|
|
|
Note that using this option disables the default mappings for this output file.
|
|
|
|
@item -map_channel [@var{input_file_id}.@var{stream_specifier}.@var{channel_id}|-1][:@var{output_file_id}.@var{stream_specifier}]
|
|
Map an audio channel from a given input to an output. If
|
|
@var{output_file_id}.@var{stream_specifier} is not set, the audio channel will
|
|
be mapped on all the audio streams.
|
|
|
|
Using "-1" instead of
|
|
@var{input_file_id}.@var{stream_specifier}.@var{channel_id} will map a muted
|
|
channel.
|
|
|
|
For example, assuming @var{INPUT} is a stereo audio file, you can switch the
|
|
two audio channels with the following command:
|
|
@example
|
|
ffmpeg -i INPUT -map_channel 0.0.1 -map_channel 0.0.0 OUTPUT
|
|
@end example
|
|
|
|
If you want to mute the first channel and keep the second:
|
|
@example
|
|
ffmpeg -i INPUT -map_channel -1 -map_channel 0.0.1 OUTPUT
|
|
@end example
|
|
|
|
The order of the "-map_channel" option specifies the order of the channels in
|
|
the output stream. The output channel layout is guessed from the number of
|
|
channels mapped (mono if one "-map_channel", stereo if two, etc.). Using "-ac"
|
|
in combination of "-map_channel" makes the channel gain levels to be updated if
|
|
input and output channel layouts don't match (for instance two "-map_channel"
|
|
options and "-ac 6").
|
|
|
|
You can also extract each channel of an input to specific outputs; the following
|
|
command extracts two channels of the @var{INPUT} audio stream (file 0, stream 0)
|
|
to the respective @var{OUTPUT_CH0} and @var{OUTPUT_CH1} outputs:
|
|
@example
|
|
ffmpeg -i INPUT -map_channel 0.0.0 OUTPUT_CH0 -map_channel 0.0.1 OUTPUT_CH1
|
|
@end example
|
|
|
|
The following example splits the channels of a stereo input into two separate
|
|
streams, which are put into the same output file:
|
|
@example
|
|
ffmpeg -i stereo.wav -map 0:0 -map 0:0 -map_channel 0.0.0:0.0 -map_channel 0.0.1:0.1 -y out.ogg
|
|
@end example
|
|
|
|
Note that currently each output stream can only contain channels from a single
|
|
input stream; you can't for example use "-map_channel" to pick multiple input
|
|
audio channels contained in different streams (from the same or different files)
|
|
and merge them into a single output stream. It is therefore not currently
|
|
possible, for example, to turn two separate mono streams into a single stereo
|
|
stream. However splitting a stereo stream into two single channel mono streams
|
|
is possible.
|
|
|
|
If you need this feature, a possible workaround is to use the @emph{amerge}
|
|
filter. For example, if you need to merge a media (here @file{input.mkv}) with 2
|
|
mono audio streams into one single stereo channel audio stream (and keep the
|
|
video stream), you can use the following command:
|
|
@example
|
|
ffmpeg -i input.mkv -f lavfi -i "
|
|
amovie=input.mkv:si=1 [a1];
|
|
amovie=input.mkv:si=2 [a2];
|
|
[a1][a2] amerge" -c:a pcm_s16le -c:v copy output.mkv
|
|
@end example
|
|
|
|
@item -map_metadata[:@var{metadata_spec_out}] @var{infile}[:@var{metadata_spec_in}] (@emph{output,per-metadata})
|
|
Set metadata information of the next output file from @var{infile}. Note that
|
|
those are file indices (zero-based), not filenames.
|
|
Optional @var{metadata_spec_in/out} parameters specify, which metadata to copy.
|
|
A metadata specifier can have the following forms:
|
|
@table @option
|
|
@item @var{g}
|
|
global metadata, i.e. metadata that applies to the whole file
|
|
|
|
@item @var{s}[:@var{stream_spec}]
|
|
per-stream metadata. @var{stream_spec} is a stream specifier as described
|
|
in the @ref{Stream specifiers} chapter. In an input metadata specifier, the first
|
|
matching stream is copied from. In an output metadata specifier, all matching
|
|
streams are copied to.
|
|
|
|
@item @var{c}:@var{chapter_index}
|
|
per-chapter metadata. @var{chapter_index} is the zero-based chapter index.
|
|
|
|
@item @var{p}:@var{program_index}
|
|
per-program metadata. @var{program_index} is the zero-based program index.
|
|
@end table
|
|
If metadata specifier is omitted, it defaults to global.
|
|
|
|
By default, global metadata is copied from the first input file,
|
|
per-stream and per-chapter metadata is copied along with streams/chapters. These
|
|
default mappings are disabled by creating any mapping of the relevant type. A negative
|
|
file index can be used to create a dummy mapping that just disables automatic copying.
|
|
|
|
For example to copy metadata from the first stream of the input file to global metadata
|
|
of the output file:
|
|
@example
|
|
ffmpeg -i in.ogg -map_metadata 0:s:0 out.mp3
|
|
@end example
|
|
|
|
To do the reverse, i.e. copy global metadata to all audio streams:
|
|
@example
|
|
ffmpeg -i in.mkv -map_metadata:s:a 0:g out.mkv
|
|
@end example
|
|
Note that simple @code{0} would work as well in this example, since global
|
|
metadata is assumed by default.
|
|
|
|
@item -map_chapters @var{input_file_index} (@emph{output})
|
|
Copy chapters from input file with index @var{input_file_index} to the next
|
|
output file. If no chapter mapping is specified, then chapters are copied from
|
|
the first input file with at least one chapter. Use a negative file index to
|
|
disable any chapter copying.
|
|
@item -debug @var{category}
|
|
Print specific debug info.
|
|
@var{category} is a number or a string containing one of the following values:
|
|
@table @samp
|
|
@item bitstream
|
|
@item buffers
|
|
picture buffer allocations
|
|
@item bugs
|
|
@item dct_coeff
|
|
@item er
|
|
error recognition
|
|
@item mb_type
|
|
macroblock (MB) type
|
|
@item mmco
|
|
memory management control operations (H.264)
|
|
@item mv
|
|
motion vector
|
|
@item pict
|
|
picture info
|
|
@item pts
|
|
@item qp
|
|
per-block quantization parameter (QP)
|
|
@item rc
|
|
rate control
|
|
@item skip
|
|
@item startcode
|
|
@item thread_ops
|
|
threading operations
|
|
@item vis_mb_type
|
|
visualize block types
|
|
@item vis_qp
|
|
visualize quantization parameter (QP), lower QP are tinted greener
|
|
@end table
|
|
@item -benchmark (@emph{global})
|
|
Show benchmarking information at the end of an encode.
|
|
Shows CPU time used and maximum memory consumption.
|
|
Maximum memory consumption is not supported on all systems,
|
|
it will usually display as 0 if not supported.
|
|
@item -benchmark_all (@emph{global})
|
|
Show benchmarking information during the encode.
|
|
Shows CPU time used in various steps (audio/video encode/decode).
|
|
@item -timelimit @var{duration} (@emph{global})
|
|
Exit after ffmpeg has been running for @var{duration} seconds.
|
|
@item -dump (@emph{global})
|
|
Dump each input packet to stderr.
|
|
@item -hex (@emph{global})
|
|
When dumping packets, also dump the payload.
|
|
@item -re (@emph{input})
|
|
Read input at native frame rate. Mainly used to simulate a grab device.
|
|
@item -loop_input
|
|
Loop over the input stream. Currently it works only for image
|
|
streams. This option is used for automatic FFserver testing.
|
|
This option is deprecated, use -loop 1.
|
|
@item -loop_output @var{number_of_times}
|
|
Repeatedly loop output for formats that support looping such as animated GIF
|
|
(0 will loop the output infinitely).
|
|
This option is deprecated, use -loop.
|
|
@item -vsync @var{parameter}
|
|
Video sync method.
|
|
For compatibility reasons old values can be specified as numbers.
|
|
Newly added values will have to be specified as strings always.
|
|
|
|
@table @option
|
|
@item 0, passthrough
|
|
Each frame is passed with its timestamp from the demuxer to the muxer.
|
|
@item 1, cfr
|
|
Frames will be duplicated and dropped to achieve exactly the requested
|
|
constant framerate.
|
|
@item 2, vfr
|
|
Frames are passed through with their timestamp or dropped so as to
|
|
prevent 2 frames from having the same timestamp.
|
|
@item drop
|
|
As passthrough but destroys all timestamps, making the muxer generate
|
|
fresh timestamps based on frame-rate.
|
|
@item -1, auto
|
|
Chooses between 1 and 2 depending on muxer capabilities. This is the
|
|
default method.
|
|
@end table
|
|
|
|
With -map you can select from which stream the timestamps should be
|
|
taken. You can leave either video or audio unchanged and sync the
|
|
remaining stream(s) to the unchanged one.
|
|
|
|
@item -async @var{samples_per_second}
|
|
Audio sync method. "Stretches/squeezes" the audio stream to match the timestamps,
|
|
the parameter is the maximum samples per second by which the audio is changed.
|
|
-async 1 is a special case where only the start of the audio stream is corrected
|
|
without any later correction.
|
|
@item -copyts
|
|
Copy timestamps from input to output.
|
|
@item -copytb @var{mode}
|
|
Specify how to set the encoder timebase when stream copying. @var{mode} is an
|
|
integer numeric value, and can assume one of the following values:
|
|
|
|
@table @option
|
|
@item 1
|
|
Use the demuxer timebase.
|
|
|
|
The time base is copied to the output encoder from the corresponding input
|
|
demuxer. This is sometimes required to avoid non monotonically increasing
|
|
timestamps when copying video streams with variable frame rate.
|
|
|
|
@item 0
|
|
Use the decoder timebase.
|
|
|
|
The time base is copied to the output encoder from the corresponding input
|
|
decoder.
|
|
|
|
@item -1
|
|
Try to make the choice automatically, in order to generate a sane output.
|
|
@end table
|
|
|
|
Default value is -1.
|
|
|
|
@item -shortest
|
|
Finish encoding when the shortest input stream ends.
|
|
@item -dts_delta_threshold
|
|
Timestamp discontinuity delta threshold.
|
|
@item -muxdelay @var{seconds} (@emph{input})
|
|
Set the maximum demux-decode delay.
|
|
@item -muxpreload @var{seconds} (@emph{input})
|
|
Set the initial demux-decode delay.
|
|
@item -streamid @var{output-stream-index}:@var{new-value} (@emph{output})
|
|
Assign a new stream-id value to an output stream. This option should be
|
|
specified prior to the output filename to which it applies.
|
|
For the situation where multiple output files exist, a streamid
|
|
may be reassigned to a different value.
|
|
|
|
For example, to set the stream 0 PID to 33 and the stream 1 PID to 36 for
|
|
an output mpegts file:
|
|
@example
|
|
ffmpeg -i infile -streamid 0:33 -streamid 1:36 out.ts
|
|
@end example
|
|
|
|
@item -bsf[:@var{stream_specifier}] @var{bitstream_filters} (@emph{output,per-stream})
|
|
Set bitstream filters for matching streams. @var{bistream_filters} is
|
|
a comma-separated list of bitstream filters. Use the @code{-bsfs} option
|
|
to get the list of bitstream filters.
|
|
@example
|
|
ffmpeg -i h264.mp4 -c:v copy -bsf:v h264_mp4toannexb -an out.h264
|
|
@end example
|
|
@example
|
|
ffmpeg -i file.mov -an -vn -bsf:s mov2textsub -c:s copy -f rawvideo sub.txt
|
|
@end example
|
|
|
|
@item -tag[:@var{stream_specifier}] @var{codec_tag} (@emph{per-stream})
|
|
Force a tag/fourcc for matching streams.
|
|
|
|
@item -timecode @var{hh}:@var{mm}:@var{ss}SEP@var{ff}
|
|
Specify Timecode for writing. @var{SEP} is ':' for non drop timecode and ';'
|
|
(or '.') for drop.
|
|
@example
|
|
ffmpeg -i input.mpg -timecode 01:02:03.04 -r 30000/1001 -s ntsc output.mpg
|
|
@end example
|
|
|
|
@item -filter_complex @var{filtergraph} (@emph{global})
|
|
Define a complex filter graph, i.e. one with arbitrary number of inputs and/or
|
|
outputs. For simple graphs -- those with one input and one output of the same
|
|
type -- see the @option{-filter} options. @var{filtergraph} is a description of
|
|
the filter graph, as described in @ref{Filtergraph syntax}.
|
|
|
|
Input link labels must refer to input streams using the
|
|
@code{[file_index:stream_specifier]} syntax (i.e. the same as @option{-map}
|
|
uses). If @var{stream_specifier} matches multiple streams, the first one will be
|
|
used. An unlabeled input will be connected to the first unused input stream of
|
|
the matching type.
|
|
|
|
Output link labels are referred to with @option{-map}. Unlabeled outputs are
|
|
added to the first output file.
|
|
|
|
For example, to overlay an image over video
|
|
@example
|
|
ffmpeg -i video.mkv -i image.png -filter_complex '[0:v][1:v]overlay[out]' -map
|
|
'[out]' out.mkv
|
|
@end example
|
|
Here @code{[0:v]} refers to the first video stream in the first input file,
|
|
which is linked to the first (main) input of the overlay filter. Similarly the
|
|
first video stream in the second input is linked to the second (overlay) input
|
|
of overlay.
|
|
|
|
Assuming there is only one video stream in each input file, we can omit input
|
|
labels, so the above is equivalent to
|
|
@example
|
|
ffmpeg -i video.mkv -i image.png -filter_complex 'overlay[out]' -map
|
|
'[out]' out.mkv
|
|
@end example
|
|
|
|
Furthermore we can omit the output label and the single output from the filter
|
|
graph will be added to the output file automatically, so we can simply write
|
|
@example
|
|
ffmpeg -i video.mkv -i image.png -filter_complex 'overlay' out.mkv
|
|
@end example
|
|
@end table
|
|
|
|
@section Preset files
|
|
A preset file contains a sequence of @var{option}=@var{value} pairs,
|
|
one for each line, specifying a sequence of options which would be
|
|
awkward to specify on the command line. Lines starting with the hash
|
|
('#') character are ignored and are used to provide comments. Check
|
|
the @file{presets} directory in the FFmpeg source tree for examples.
|
|
|
|
Preset files are specified with the @code{vpre}, @code{apre},
|
|
@code{spre}, and @code{fpre} options. The @code{fpre} option takes the
|
|
filename of the preset instead of a preset name as input and can be
|
|
used for any kind of codec. For the @code{vpre}, @code{apre}, and
|
|
@code{spre} options, the options specified in a preset file are
|
|
applied to the currently selected codec of the same type as the preset
|
|
option.
|
|
|
|
The argument passed to the @code{vpre}, @code{apre}, and @code{spre}
|
|
preset options identifies the preset file to use according to the
|
|
following rules:
|
|
|
|
First ffmpeg searches for a file named @var{arg}.ffpreset in the
|
|
directories @file{$FFMPEG_DATADIR} (if set), and @file{$HOME/.ffmpeg}, and in
|
|
the datadir defined at configuration time (usually @file{PREFIX/share/ffmpeg})
|
|
or in a @file{ffpresets} folder along the executable on win32,
|
|
in that order. For example, if the argument is @code{libx264-max}, it will
|
|
search for the file @file{libx264-max.ffpreset}.
|
|
|
|
If no such file is found, then ffmpeg will search for a file named
|
|
@var{codec_name}-@var{arg}.ffpreset in the above-mentioned
|
|
directories, where @var{codec_name} is the name of the codec to which
|
|
the preset file options will be applied. For example, if you select
|
|
the video codec with @code{-vcodec libx264} and use @code{-vpre max},
|
|
then it will search for the file @file{libx264-max.ffpreset}.
|
|
@c man end OPTIONS
|
|
|
|
@chapter Tips
|
|
@c man begin TIPS
|
|
|
|
@itemize
|
|
@item
|
|
For streaming at very low bitrate application, use a low frame rate
|
|
and a small GOP size. This is especially true for RealVideo where
|
|
the Linux player does not seem to be very fast, so it can miss
|
|
frames. An example is:
|
|
|
|
@example
|
|
ffmpeg -g 3 -r 3 -t 10 -b:v 50k -s qcif -f rv10 /tmp/b.rm
|
|
@end example
|
|
|
|
@item
|
|
The parameter 'q' which is displayed while encoding is the current
|
|
quantizer. The value 1 indicates that a very good quality could
|
|
be achieved. The value 31 indicates the worst quality. If q=31 appears
|
|
too often, it means that the encoder cannot compress enough to meet
|
|
your bitrate. You must either increase the bitrate, decrease the
|
|
frame rate or decrease the frame size.
|
|
|
|
@item
|
|
If your computer is not fast enough, you can speed up the
|
|
compression at the expense of the compression ratio. You can use
|
|
'-me zero' to speed up motion estimation, and '-g 0' to disable
|
|
motion estimation completely (you have only I-frames, which means it
|
|
is about as good as JPEG compression).
|
|
|
|
@item
|
|
To have very low audio bitrates, reduce the sampling frequency
|
|
(down to 22050 Hz for MPEG audio, 22050 or 11025 for AC-3).
|
|
|
|
@item
|
|
To have a constant quality (but a variable bitrate), use the option
|
|
'-qscale n' when 'n' is between 1 (excellent quality) and 31 (worst
|
|
quality).
|
|
|
|
@end itemize
|
|
@c man end TIPS
|
|
|
|
@chapter Examples
|
|
@c man begin EXAMPLES
|
|
|
|
@section Preset files
|
|
|
|
A preset file contains a sequence of @var{option=value} pairs, one for
|
|
each line, specifying a sequence of options which can be specified also on
|
|
the command line. Lines starting with the hash ('#') character are ignored and
|
|
are used to provide comments. Empty lines are also ignored. Check the
|
|
@file{presets} directory in the FFmpeg source tree for examples.
|
|
|
|
Preset files are specified with the @code{pre} option, this option takes a
|
|
preset name as input. FFmpeg searches for a file named @var{preset_name}.avpreset in
|
|
the directories @file{$AVCONV_DATADIR} (if set), and @file{$HOME/.ffmpeg}, and in
|
|
the data directory defined at configuration time (usually @file{$PREFIX/share/ffmpeg})
|
|
in that order. For example, if the argument is @code{libx264-max}, it will
|
|
search for the file @file{libx264-max.avpreset}.
|
|
|
|
@section Video and Audio grabbing
|
|
|
|
If you specify the input format and device then ffmpeg can grab video
|
|
and audio directly.
|
|
|
|
@example
|
|
ffmpeg -f oss -i /dev/dsp -f video4linux2 -i /dev/video0 /tmp/out.mpg
|
|
@end example
|
|
|
|
Or with an ALSA audio source (mono input, card id 1) instead of OSS:
|
|
@example
|
|
ffmpeg -f alsa -ac 1 -i hw:1 -f video4linux2 -i /dev/video0 /tmp/out.mpg
|
|
@end example
|
|
|
|
Note that you must activate the right video source and channel before
|
|
launching ffmpeg with any TV viewer such as
|
|
@uref{http://linux.bytesex.org/xawtv/, xawtv} by Gerd Knorr. You also
|
|
have to set the audio recording levels correctly with a
|
|
standard mixer.
|
|
|
|
@section X11 grabbing
|
|
|
|
Grab the X11 display with ffmpeg via
|
|
|
|
@example
|
|
ffmpeg -f x11grab -s cif -r 25 -i :0.0 /tmp/out.mpg
|
|
@end example
|
|
|
|
0.0 is display.screen number of your X11 server, same as
|
|
the DISPLAY environment variable.
|
|
|
|
@example
|
|
ffmpeg -f x11grab -s cif -r 25 -i :0.0+10,20 /tmp/out.mpg
|
|
@end example
|
|
|
|
0.0 is display.screen number of your X11 server, same as the DISPLAY environment
|
|
variable. 10 is the x-offset and 20 the y-offset for the grabbing.
|
|
|
|
@section Video and Audio file format conversion
|
|
|
|
Any supported file format and protocol can serve as input to ffmpeg:
|
|
|
|
Examples:
|
|
@itemize
|
|
@item
|
|
You can use YUV files as input:
|
|
|
|
@example
|
|
ffmpeg -i /tmp/test%d.Y /tmp/out.mpg
|
|
@end example
|
|
|
|
It will use the files:
|
|
@example
|
|
/tmp/test0.Y, /tmp/test0.U, /tmp/test0.V,
|
|
/tmp/test1.Y, /tmp/test1.U, /tmp/test1.V, etc...
|
|
@end example
|
|
|
|
The Y files use twice the resolution of the U and V files. They are
|
|
raw files, without header. They can be generated by all decent video
|
|
decoders. You must specify the size of the image with the @option{-s} option
|
|
if ffmpeg cannot guess it.
|
|
|
|
@item
|
|
You can input from a raw YUV420P file:
|
|
|
|
@example
|
|
ffmpeg -i /tmp/test.yuv /tmp/out.avi
|
|
@end example
|
|
|
|
test.yuv is a file containing raw YUV planar data. Each frame is composed
|
|
of the Y plane followed by the U and V planes at half vertical and
|
|
horizontal resolution.
|
|
|
|
@item
|
|
You can output to a raw YUV420P file:
|
|
|
|
@example
|
|
ffmpeg -i mydivx.avi hugefile.yuv
|
|
@end example
|
|
|
|
@item
|
|
You can set several input files and output files:
|
|
|
|
@example
|
|
ffmpeg -i /tmp/a.wav -s 640x480 -i /tmp/a.yuv /tmp/a.mpg
|
|
@end example
|
|
|
|
Converts the audio file a.wav and the raw YUV video file a.yuv
|
|
to MPEG file a.mpg.
|
|
|
|
@item
|
|
You can also do audio and video conversions at the same time:
|
|
|
|
@example
|
|
ffmpeg -i /tmp/a.wav -ar 22050 /tmp/a.mp2
|
|
@end example
|
|
|
|
Converts a.wav to MPEG audio at 22050 Hz sample rate.
|
|
|
|
@item
|
|
You can encode to several formats at the same time and define a
|
|
mapping from input stream to output streams:
|
|
|
|
@example
|
|
ffmpeg -i /tmp/a.wav -map 0:a -b:a 64k /tmp/a.mp2 -map 0:a -b:a 128k /tmp/b.mp2
|
|
@end example
|
|
|
|
Converts a.wav to a.mp2 at 64 kbits and to b.mp2 at 128 kbits. '-map
|
|
file:index' specifies which input stream is used for each output
|
|
stream, in the order of the definition of output streams.
|
|
|
|
@item
|
|
You can transcode decrypted VOBs:
|
|
|
|
@example
|
|
ffmpeg -i snatch_1.vob -f avi -c:v mpeg4 -b:v 800k -g 300 -bf 2 -c:a libmp3lame -b:a 128k snatch.avi
|
|
@end example
|
|
|
|
This is a typical DVD ripping example; the input is a VOB file, the
|
|
output an AVI file with MPEG-4 video and MP3 audio. Note that in this
|
|
command we use B-frames so the MPEG-4 stream is DivX5 compatible, and
|
|
GOP size is 300 which means one intra frame every 10 seconds for 29.97fps
|
|
input video. Furthermore, the audio stream is MP3-encoded so you need
|
|
to enable LAME support by passing @code{--enable-libmp3lame} to configure.
|
|
The mapping is particularly useful for DVD transcoding
|
|
to get the desired audio language.
|
|
|
|
NOTE: To see the supported input formats, use @code{ffmpeg -formats}.
|
|
|
|
@item
|
|
You can extract images from a video, or create a video from many images:
|
|
|
|
For extracting images from a video:
|
|
@example
|
|
ffmpeg -i foo.avi -r 1 -s WxH -f image2 foo-%03d.jpeg
|
|
@end example
|
|
|
|
This will extract one video frame per second from the video and will
|
|
output them in files named @file{foo-001.jpeg}, @file{foo-002.jpeg},
|
|
etc. Images will be rescaled to fit the new WxH values.
|
|
|
|
If you want to extract just a limited number of frames, you can use the
|
|
above command in combination with the -vframes or -t option, or in
|
|
combination with -ss to start extracting from a certain point in time.
|
|
|
|
For creating a video from many images:
|
|
@example
|
|
ffmpeg -f image2 -i foo-%03d.jpeg -r 12 -s WxH foo.avi
|
|
@end example
|
|
|
|
The syntax @code{foo-%03d.jpeg} specifies to use a decimal number
|
|
composed of three digits padded with zeroes to express the sequence
|
|
number. It is the same syntax supported by the C printf function, but
|
|
only formats accepting a normal integer are suitable.
|
|
|
|
When importing an image sequence, -i also supports expanding shell-like
|
|
wildcard patterns (globbing) internally. To lower the chance of interfering
|
|
with your actual file names and the shell's glob expansion, you are required
|
|
to activate glob meta characters by prefixing them with a single @code{%}
|
|
character, like in @code{foo-%*.jpeg}, @code{foo-%?%?%?.jpeg} or
|
|
@code{foo-00%[234%]%*.jpeg}.
|
|
If your filename actually contains a character sequence of a @code{%} character
|
|
followed by a glob character, you must double the @code{%} character to escape
|
|
it. Imagine your files begin with @code{%?-foo-}, then you could use a glob
|
|
pattern like @code{%%?-foo-%*.jpeg}. For input patterns that could be both a
|
|
printf or a glob pattern, ffmpeg will assume it is a glob pattern.
|
|
|
|
@item
|
|
You can put many streams of the same type in the output:
|
|
|
|
@example
|
|
ffmpeg -i test1.avi -i test2.avi -map 0.3 -map 0.2 -map 0.1 -map 0.0 -c copy test12.nut
|
|
@end example
|
|
|
|
The resulting output file @file{test12.avi} will contain first four streams from
|
|
the input file in reverse order.
|
|
|
|
@item
|
|
To force CBR video output:
|
|
@example
|
|
ffmpeg -i myfile.avi -b 4000k -minrate 4000k -maxrate 4000k -bufsize 1835k out.m2v
|
|
@end example
|
|
|
|
@item
|
|
The four options lmin, lmax, mblmin and mblmax use 'lambda' units,
|
|
but you may use the QP2LAMBDA constant to easily convert from 'q' units:
|
|
@example
|
|
ffmpeg -i src.ext -lmax 21*QP2LAMBDA dst.ext
|
|
@end example
|
|
|
|
@end itemize
|
|
@c man end EXAMPLES
|
|
|
|
@include eval.texi
|
|
@include decoders.texi
|
|
@include encoders.texi
|
|
@include demuxers.texi
|
|
@include muxers.texi
|
|
@include indevs.texi
|
|
@include outdevs.texi
|
|
@include protocols.texi
|
|
@include bitstream_filters.texi
|
|
@include filters.texi
|
|
@include metadata.texi
|
|
|
|
@ignore
|
|
|
|
@setfilename ffmpeg
|
|
@settitle ffmpeg video converter
|
|
|
|
@c man begin SEEALSO
|
|
ffplay(1), ffprobe(1), ffserver(1) and the FFmpeg HTML documentation
|
|
@c man end
|
|
|
|
@c man begin AUTHORS
|
|
See git history
|
|
@c man end
|
|
|
|
@end ignore
|
|
|
|
@bye
|