mirror of
https://github.com/vimagick/dockerfiles.git
synced 2024-12-04 10:34:49 +02:00
2.5 KiB
2.5 KiB
motion-arm
Motion is a program that monitors the video signal from one or more cameras and is able to detect if a significant part of the picture has changed. Or in other words, it can detect motion.
docker-compose.yml
motion:
image: easypi/motion-arm
ports:
- "8080:8080"
- "8081:8081"
volumes:
- ./motion.conf:/etc/motion/motion.conf
- ./data:/var/lib/motion
- /etc/localtime:/etc/localtime
devices:
- /dev/video0:/dev/video0
restart: always
You can edit motion.conf
to customize motion.
# set image width
width 640
# set image height
height 480
# set frame rate
framerate 5
# disable image output
output_pictures off
# disable video output
ffmpeg_output_movies off
# encode timelapse movie
ffmpeg_timelapse 60
Motion can work with Home-Assistant via External Commands.
``yaml binary_sensor:
- platform: mqtt name: Motion state_topic: /pi/sensor/motion qos: 0 payload_on: ON payload_off: OFF device_class: motion
```bash
# Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
# To give the filename as an argument to a command append it with %f
# CURL
;on_movie_start curl -s -H 'X-HA-Access: ******' -H 'Content-Type: application/json' -d '{"state": "on", "attributes": {"friendly_name": "Motion", "device_class": "motion"}}' http://hass.easypi.pro:8123/api/states/binary_sensor.motion
# MQTT
;on_movie_start mosquitto_pub -h mqtt.easypi.pro -u username -P password -r -t /pi/sensor/motion -m ON
# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# To give the filename as an argument to a command append it with %f
# CURL
;on_movie_end curl -s -H 'X-HA-Access: ******' -H 'Content-Type: application/json' -d '{"state": "off", "attributes": {"friendly_name": "Motion", "device_class": "motion"}}' http://hass.easypi.pro:8123/api/states/binary_sensor.motion
# MQTT
;on_movie_end mosquitto_pub -h mqtt.easypi.pro -u username -P password -r -t /pi/sensor/motion -m OFF
Please read this to enable raspberry pi camera module.
####################
# /boot/config.txt #
####################
##Camera
gpu_mem=128
start_file=start_x.elf
fixup_file=fixup_x.dat
disable_camera_led=1